SoCal Jet Boats

Classifieds => WTB => Topic started by: 21dusty on March 09, 2017, 09:35:39 AM

Title: Crankshaft Mounted PTO Adapter for Berkeley Jet Drive Shaft
Post by: 21dusty on March 09, 2017, 09:35:39 AM

Hello All

I am looking for the Crankshaft mounted adapter/PTO flange for connecting the drive line U joint for a Berkeley Jet to the engine/motor.

The bolt pattern should be from an early Vintage Small Block Chevy/Merc (2 Piece Rear Main Seal), a 4 Cylinder or 6 Cylinder Chevy/Merc Engine would probably be the same.

Used is Fine and preferred due to the cost, as long as all the threads and bolt holes are not damaged.

Thanks in Advance for any assistance.

Take Care,

Dusty

Title: Re: Crankshaft Mounted PTO Adapter for Berkeley Jet Drive Shaft
Post by: jim brock on March 09, 2017, 11:29:03 AM

is this for a flex plate or a steel flywheel ??

Title: Re: Crankshaft Mounted PTO Adapter for Berkeley Jet Drive Shaft
Post by: 21dusty on March 09, 2017, 03:11:20 PM

Hello All

Bolts up against the FLEX PLATE only, 7/16 SAE Cap Screw Bolts also.

Thanks,

Dusty