SoCal Jet Boats
Classifieds => WTB => Topic started by: BIG JOHNSON on March 07, 2012, 10:23:07 AM
-
Need two of them. Anybody got em or know where to buy?
I have a manual tank selector but I wanna run both tanks at one time and shut off the empty one when low.
Sent from my ADR6400L using Tapatalk
-
Need two of them. Anybody got em or know where to buy?
I have a manual tank selector but I wanna run both tanks at one time and shut off the empty one when low.
Sent from my ADR6400L using Tapatalk
Check out McMaster Carr......Look for fuel oil ball valves. ;)
Better yet http://www.mcmaster.com/#fuel-ball-valves/=gk8pog (http://www.mcmaster.com/#fuel-ball-valves/=gk8pog)
I don't know how trick you want to get....These are awesome valves and are in AN sizes... :thumbup:
GT
-
Maybe I'm just better off getting the Imco like what came in the boat and plug the harness back in.. think those is around $400.
I would think manual on off valves would be like $30 or so.
Sent from my ADR6400L using Tapatalk
-
yeh i dunno i just used brass ball valves... so far so good. figure if they go bad i can buy like 10 of em for the price of one of those billet pieces.
you talkin the ones used for water at HD? I thought about that.
Sent from my ADR6400L using Tapatalk
-
I am pretty sure you'll be fine with the brass ones from HD or McFadden-Dale, I am using them and have been for two seasons now. If they go bad, i'll replace them but no signs of issues yet.
-
The Hose Man hooked me up.
Sent from my ADR6400L using Tapatalk
-
That should work jsut fine. I personally prefer "Y Blocks" instead of "T Intersections" for flow reasons but I think you will be ok. This is what I used, http://www.jegs.com/p/JEGS-Performance-Products/JEGS-Billet-Y-Blocks/755315/10002/-1. (http://www.jegs.com/p/JEGS-Performance-Products/JEGS-Billet-Y-Blocks/755315/10002/-1.)