SoCal Jet Boats
Classifieds => WTB => Topic started by: pw_Tony on March 25, 2008, 08:31:06 AM
-
Anyone got one laying around? Lookin for one and can't buy new, strict budget here. PM me is you have one or know of one for sale.
Tony
-
Anyone got one laying around? Lookin for one and can't buy new, strict budget here. PM me is you have one or know of one for sale.
Tony
did you hit up brock?
-
Jacuzzi, Berkeley, Dominator have the same splines for a driveline.
The other end can be a 1310 PTO/driveline or 1350 driveline/PTO, exception would be engine brand/model specific end's that have a built-in/one-piece driveline/PTO.
Do you have a PTO that fits your engine's crankshaft?
-
Jacuzzi, Berkeley, Dominator have the same splines for a driveline.
The other end can be a 1310 PTO/driveline or 1350 driveline/PTO, exception would be engine brand/model specific end's that have a built-in/one-piece driveline/PTO.
Do you have a PTO that fits your engine's crankshaft?
I have one that came with my boat. Its a 1310 with built in PTO. I took the driveline off my Berk. and it will not fit over the splines of the WJ I have. The driveline is BrendellaJet's and I think he wants $75. I will go find a pic
-
Pee Dub..................I have 4 of them in my shed........1 is for the Bahner and 1 is Ryan's for the Fantasy ;D
I dont know which one im using yet but after i get the engine in i will know which one's im not!
Soooooo...... if your not in to much of a hurry, i will just give you one...
Whoops, just read it and its for a Ferd :o But i think i still have one for ya
2sav
-
That would be awesome! I'll stop by later and check out whatcha got O0
-
So I don't get it, my Berkley one WILL or WILL NOT fit my Jacuzzi??? ???
I would go check it but my motor and driveline is at a friend's house and my boat is here
-
... I took the driveline off my Berk. and it will not fit over the splines of the WJ I have...
Are you sure? I've put the exact same driveline on a Berkeley, a YJ, a WJ, and my old style Dominator.
-
Are you sure? I've put the exact same driveline on a Berkeley, a YJ, a WJ, and my old style Dominator.
Me to, maybe there was just some crap in the splines ???
2sav
-
[attachimg=#]
-
Does your engine have the rear mount with a saddle to sit on top of 2 pump/suction housing bolts and a mid mount ? if thats the case its not the splines that are the problem its the over all length thats the issue. Those set ups use this DL
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.jetboatperformance.com%2Fimages%2Fuploads%2FRockwell.JPG&hash=7d870b9562dbe24172e3f47174ee605805d6bd4c)
if not you should be to use a standard 1310 DL with corosponding PTO
-
Sweet, thanks for the info Josh. I still need to buy a rear mount :banghead:
-
A PTO
[attachimg=#]
-
Does your engine have the rear mount with a saddle to sit on top of 2 pump/suction housing bolts and a mid mount ? if thats the case its not the splines that are the problem its the over all length thats the issue. Those set ups use this DL
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.jetboatperformance.com%2Fimages%2Fuploads%2FRockwell.JPG&hash=7d870b9562dbe24172e3f47174ee605805d6bd4c)
if not you should be to use a standard 1310 DL with corosponding PTO
Josh, do you know if a bellhousing rear mount from a Berkeley would work on a Jacuzzi?
-
Josh, do you know if a bellhousing rear mount from a Berkeley would work on a Jacuzzi?
If it's the berkeley bellhousing that sits on the bearing cap it will not.
Typically that driveline is used with a bellhousing with a borg warner pattern, then the jacuzzi mount (saddle, shown below) bolts to that and is suspended by two rubber coushions
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2FDSCF1000.jpg&hash=3c5f362b622ecf70f55a6f2caf709c631da367b3)