SoCal Jet Boats

Classifieds => WTB => Topic started by: Beaveretriever on September 22, 2008, 05:29:25 PM

Title: looking for a 750cfm carb for a 454 (stock)
Post by: Beaveretriever on September 22, 2008, 05:29:25 PM

i broke the damn ears off my carb and im looking for another one. the motor is a stock 454.


Thanks
The Beav

Title: Re: looking for a 750cfm carb for a 454 (stock)
Post by: Mark on September 22, 2008, 07:02:16 PM

Vacuum secondary or double pumper?

I've got a vacuum sec 750 (3310-3) that was rebuilt many moons ago then set on the shelf. 

I'd consider it a good core and nothing more.  I may have the makings of a gasket set somewhere, I'll have to scrounge around if you're interested.  I can take pics and email, just send me your e-address in a PM.

$75.00

Cheers, Mark (Huntington Beach)

Title: Re: looking for a 750cfm carb for a 454 (stock)
Post by: koyota93 on September 22, 2008, 07:47:27 PM

I have a recently rebuilt 750 (3310) with vac secondaries or a 750 DP. The 3310 came off my 454 before I blew it up. The 750 came from a running BBF 460, but it would be a safe bet to rebuild.

Title: Re: looking for a 750cfm carb for a 454 (stock)
Post by: crewchief22 on September 22, 2008, 08:21:23 PM

You should be able to order just a throttle plate from Holley (if that's what it is).

Title: Re: looking for a 750cfm carb for a 454 (stock)
Post by: GT Jets on September 22, 2008, 09:48:25 PM

Quote from: crewchief22 on September 22, 2008, 08:21:23 PM

You should be able to order just a throttle plate from Holley (if that's what it is).

X2, I may have one in the scrap pile too, got a list #?


There is a carb shop in my area too, I have bought reconditioned carb parts from them in the past, for cheap...lemme know.

GT

Title: Re: looking for a 750cfm carb for a 454 (stock)
Post by: Beaveretriever on September 22, 2008, 10:09:12 PM

the base plate is broke, i dont know if i will need another carb or just the base. i just rebuild mine before the OLDS broke and i would like to stay with the 750 DP mech sec. thanks for all the help fellas, im going to get the boat this weekend and pull off the carb and stick it in the garage and pull it apart.


Thanks
The Beav

Title: Re: looking for a 750cfm carb for a 454 (stock)
Post by: stc315 on September 24, 2008, 11:11:22 AM

I've been using this guy for rebuilds. He does pretty good work and if you tell him your engine particulars, he will dial in the carb for you.

http://cgi.ebay.com/ebaymotors/HOLLEY-CARBURETOR-750-DOUBLE-PUMPER-HI-PERFORMANCE_W0QQitemZ120309409106QQcmdZViewItem?hash=item120309409106&_trkparms=72%3A727%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3911.c0.m14