SoCal Jet Boats
Classifieds => WTB => Topic started by: Beaveretriever on February 12, 2013, 11:01:51 PM
-
Stock works like 8" deep or even a dooley pan 10qt. What do you guys got. Let me know.
Thanks
The beav
-
I have a Mercury Marine pan. I think it's an 8 quart. If it wasn't 40 degrees I would go out and take a picture.... But I'm a wuss....
-
Check this, looks like he's fairly close to you
http://inlandempire.craigslist.org/boa/3573883254.html (http://inlandempire.craigslist.org/boa/3573883254.html)
-
Forgot to mention I bought a new Hamburger's oil pan for my engine.
Check it out, the 1498
http://www.jegs.com/p/Hamburgers/Hamburgers-Oil-Pans/760854/10002/-1 (http://www.jegs.com/p/Hamburgers/Hamburgers-Oil-Pans/760854/10002/-1)
-
im still looking for a pan. Thanks 74rogers i looked at those pans and they will probably work but used is always better :-) cheaper too. If anyone has anything not deeper than 8" i would be interested. Il be in parker for the scjb kickoff.
The Beav
-
Hey beav! I have a gen 5 oil pan it's stock but worked fine on my boat you can have it if you want!
😎
-
Dave, I have the stock pan off of my GenIV that you are welcome to. I'll plan on bringing it to Parker.
-
Thanks keith. That will get me by until I figure out what im going to do. Ill trade you the valve cover breathers I owe you
-
All I ask is that if it comes back off the boat, it comes back to me or is available for someone else in need.
-
No problem
-
I'll measure the v-drive bread box pan I got, but it would not fit my eliminator, missed by a half inch. Day cruiser, no set back, etc. It hit the top/front of the intake. Now it has a chiny chrome one from chino (Summit)
Daniel
-
I'll measure the v-drive bread box pan I got, but it would not fit my eliminator, missed by a half inch. Day cruiser, no set back, etc. It hit the top/front of the intake. Now it has a chiny chrome one from chino (Summit)
Daniel
i dont thing that i can use a V-drive pan in the jet boat because the trap doors will be different. my pump is also set back and hits the intake near the front of the boat. So i need something that isnt deep
-
Hey! How bout this pan off my HALLETT? Needs a gooood cleaning but your welcome to it...
😎
-
Oops! My bad beaveretriever the one I have is for gen 5. Sorry I tried 🍺😎
😎
-
No big deal. Thanks. Im going to buy a new pan from hamburger. I found 10qt pans with pick up and windage tray for $220
-
Good deal!!👍
😎
-
No big deal. Thanks. Im going to buy a new pan from hamburger. I found 10qt pans with pick up and windage tray for $220
Do you still want me to bring the stock pan to Parker?
-
No im ok for now keith. I will still bring the breathers though
-
This one is yours if you need it.
-
I have a dooley pan for sale. Gen 4
Sent from my SGH-T999 using SoCal Jet Boats mobile app
-
Text me 801-792-2192
Sent from my SGH-T999 using SoCal Jet Boats mobile app