SoCal Jet Boats

Classifieds => WTB => Topic started by: Tio Pancho on June 30, 2010, 09:10:47 PM

Title: Panther to 454 Driveline
Post by: Tio Pancho on June 30, 2010, 09:10:47 PM

Need a driveline for Bebo. 454 to Panther pump. The one Ray sent me did not work. I shoulda mentioned what the motor/jet combo was. Sorry Ray.

Thank you.

Title: Re: Panther to 454 Driveline
Post by: lbhsbz on June 30, 2010, 09:25:18 PM

I never thought I would speak these words again, but call Tom at Jet Boat Performance...he's done enough swaps to berks that he's probably got a few drivelines laying around.

Title: Re: Panther to 454 Driveline
Post by: Tio Pancho on June 30, 2010, 09:26:58 PM

You are right. I will give him a call in the morning.

Thanks

Title: Re: Panther to 454 Driveline
Post by: AQUAHOLIC on June 30, 2010, 11:04:29 PM

i just did this. i have the old style dive line if you want it. if you want to replace it to a newer style one you need to get a power take off adapter. i got both of these from tom at jet boat performance. the newer drive shafts are too short by almost an inch.

anyway let me know if you need anything else. like i said tom at jbp walked me right thru it.

Title: Re: Panther to 454 Driveline
Post by: Tio Pancho on June 30, 2010, 11:11:14 PM

If it will work for us we will use it. Just out of curiosity, other than the lenght, what differences are there between the two?

I'll pm you my info.
 :thumbup:

Title: Re: Panther to 454 Driveline
Post by: AQUAHOLIC on June 30, 2010, 11:21:38 PM

other then length nothing. the new stye drive shaft with the pto bolted right on. you just cant put the new style drive shaft from bbc to panther without that power take off spacer.