SoCal Jet Boats
Classifieds => WTB => Topic started by: beerjet on January 21, 2008, 04:50:51 PM
-
For a Pan-E-Vac system . All I need Is the tubes that go into the headers if anyone has any they are kicking around .
-
For a Pan-E-Vac system . All I need Is the tubes that go into the headers if anyone has any they are kicking around .
Not sure but I think the Moroso Kit and the Mr. Gasket kit are around $28 and they come with the one way valves.
-
Not sure but I think the Moroso Kit and the Mr. Gasket kit are around $28 and they come with the one way valves.
Heres what happened .
I originally had straight headers (set #1) with out the tubes . I bought a kit . Ralph gave a set of twisty headers (set #2) that already tubes in them . I wanted to run my original straight headers (set #1) for testing purposes so I welded the tubes that came with the kit to my original straight headers . I scored an awsome deal on a diffrent set of straight headers (set #3) and they do not have tubes in them . I will not be running (set #1) my original headers anymore and I dont want to cut the tubes off . I am not in a hurry .
So , what time will the train get to Chicago ???
_beerjet-
-
Go to the hardware store and get some black pipe cut it in the middle. Then cut the ends at the same angle the tubes are cut in you other headers. $2.65 and some labor !
-
Go to the hardware store and get some black pipe cut it in the middle. Then cut the ends at the same angle the tubes are cut in you other headers. $2.65 and some labor !
If there is labor involved , I could just cut my old/new ones off. I only set them in the collector maybe a 1/16 of an inch. 8)
-beerjet-