TX 19 youngblood

« **Reply #100 on:** January 30, 2010, 02:55:46 PM »

Looking good Brian

You ain't frucking around

« **Reply #101 on:** January 30, 2010, 09:05:19 PM »

Hey there Brian, Its been awhile since I have been on here.. I had to start from page one so I could get up dated info on your progress,
Thought I was reading a book with Lots of pictures, Awesome work can't wait to see it... Be down tomorrow to check her out. !

« **Reply #102 on:** January 31, 2010, 07:34:54 PM »

Quote from: River Dad on January 28, 2010, 07:34:09 AM

Mill looks great Brian......

Thanks Jason now I just need to leave it alone

« **Reply #103 on:** January 31, 2010, 08:09:56 PM »

Quote from: boost on January 31, 2010, 07:34:54 PM

Thanks Jason now I just need to leave it alone

X2

« **Reply #104 on:** February 07, 2010, 10:56:58 AM »

Rewired the gauges now I'm looking for some black nylon wire loom so I can cover the wires going to the back of the transom.

« **Reply #105 on:** February 07, 2010, 11:19:35 AM »

Looks good bro! clean and tight

« **Reply #106 on:** February 07, 2010, 12:04:13 PM »

now you can come do my boat

« **Reply #107 on:** February 07, 2010, 01:44:04 PM »

i got my loom stuff from mcfadden dale....really nice stuff another place would be mcmaster carr

« **Reply #108 on:** February 07, 2010, 02:33:57 PM »

how much you need bri ive got a whole roll send me a length and an address.we use this stuff all the time for the elevator shafts

« **Reply #109 on:** February 07, 2010, 05:01:05 PM »

Quote from: Just Electric on February 07, 2010, 02:33:57 PM

how much you need bri ive got a whole roll send me a length and an address.we use this stuff all the time for the elevator shafts

This is what I'm looking for in black are something similar,thanks Justin

« **Reply #110 on:** February 07, 2010, 06:53:01 PM »

Mcfadden dale sells that in black

« **Reply #111 on:** February 07, 2010, 08:11:32 PM »

Painlees wiring makes it and you can order it from summit!

http://www.summitracing.com/parts/PRF-70901/

Or I could order it for you!

« **Reply #112 on:** February 07, 2010, 08:18:13 PM »

Quote from: Marcsrollin on February 07, 2010, 08:11:32 PM

Painlees wiring makes it and you can order it from summit!

http://www.summitracing.com/parts/PRF-70901/

Or I could order it for you!

Thanks guys

Mark I'm going to try McFadden -Dale tomorrow there just down the street if they don't have what I need I'll call you thanks.

« **Reply #113 on:** February 07, 2010, 11:12:48 PM »

hey bri got your text.yeah the stuff we use is different.let me send you a pic tomorrow and if you want some no prob

« **Reply #114 on:** February 07, 2010, 11:39:07 PM »

Brian, looks like normal split loom tubing to me? The Depot carries it as well as Radio Shack in various lengths, if that helps.

While you're at it, I'd look at the black spiral wrap stuff. (Both places carry that as well) More of a bitch to put on, but cleaner IMO.

Ray

« **Reply #115 on:** February 08, 2010, 04:41:02 PM »

all i have right now is a 500 ft roll of the spiral stuff

« **Reply #116 on:** February 08, 2010, 05:24:36 PM »

Quote from: IRRebel on February 07, 2010, 11:39:07 PM

Brian, looks like normal split loom tubing to me? The Depot carries it as well as Radio Shack in various lengths, if that helps.

While you're at it, I'd look at the black spiral wrap stuff. (Both places carry that as well) More of a bitch to put on, but cleaner IMO.

Ray

Ray its different then normal split tubing Its solid all the way round no split its actually call nylon braided sleeving thats the best I can describe it.

« **Reply #117 on:** February 08, 2010, 05:28:44 PM »

Brian where ya been

Haven;t seen ya in here in awhile. You about got your boat done yet

« **Reply #118 on:** February 08, 2010, 07:57:08 PM »

Quote from: 76NORDIC on February 08, 2010, 05:28:44 PM

Brian where ya been Haven;t seen ya in here in awhile. You about got your boat done yet

Whats up Mark been real busy at work and all my free time Ive been working on the boat so I'm more then half way done.

« **Reply #119 on:** February 08, 2010, 08:27:51 PM »

sheesh, just use black electrical tape

« **Reply #120 on:** February 08, 2010, 08:41:51 PM »

Quote from: Ralph Brunt on February 08, 2010, 08:27:51 PM

sheesh, just use black electrical tape

got cases of that too bri

« **Reply #121 on:** February 09, 2010, 06:44:52 PM »

Quote from: boost on February 08, 2010, 05:24:36 PM

Ray its different then normal split tubing Its solid all the way round no split its actually call nylon braided sleeving thats the best I can describe it.

Ok, just what it looked like to me in the pics.

Probably a lot of suppliers around town here to get that too, but sounds like you have it in hand.

Gotta tell ya though bro, Killer looking boat. But more than that, the attention to "function before form" on EVERYTHING and attention to detail is incredible!

Ray

« **Reply #122 on:** February 09, 2010, 09:03:24 PM »

Thanks Ray

« **Reply #123 on:** February 09, 2010, 09:30:45 PM »

probably the best way to explain the stuff brian is talking about is like a chineese finger trap! way nice stuff! and when done right it looks pretty clean...pretty much looks like braided hose....hope you went with the mcfadden dale stuff brian! thats who i went with and it was pretty easy to work with...it only took 10 feet exact to do the whole motor, well atleast for me! the mcfaddendale stuff your able to start out at about and inch around, and able to snug it down to fit well around 3 14 guage wires way cool stuff to work with

« **Reply #124 on:** February 10, 2010, 04:57:17 AM »

Josh McFadden-Dale has just about everything I need thanks for the heads up

best part of it only 10 minutes from the house.

76NORDIC

OUTLAW

BOOST

MADSKILLZ

BOOST

MADSKILLZ

Ralph Brunt

Nordie

Just Electric

BOOST

OC2Vegas

Marcsrollin

BOOST

Just Electric

IRRebel

Just Electric

BOOST

76NORDIC

BOOST

Ralph Brunt

Just Electric

IRRebel

BOOST

Nordie

BOOST