1980 Miller

« **on:** April 27, 2008, 09:44:44 PM »

I am selling a 1980 19 foot Miller Jet boat. It has a professionally rebuilt by Jet Boat Performance, 30 over 454 BBC, Clevite bearings, Dura Bond cam bearings,with a 6-71 Hampton supercharger 8 lbs of boost, OE chevrolet crank, forged JE pistons, Merlin World heads Rect 320cc Manley Stainless valves # wrl030620-2, Comp Cam and lifters, Summit high volume oil pump, Summit 3 piece timing set, duel polished 750 DF DP boost referenced carbs, K&N oil filter, Dooley oil pan, Rewarder headers 2 1/2 inch primaries, 4 1/2 inch collectors, holly high volume fuel pump & regulator, all new plumbing lines and fittings. Mallory ignition system.
It has a Berkley jet drive fully overhauled with Blue printed jet with race shaft and stainless impeller and a Place Diverter with hydraulic controls. It also has a new Teleflex steering rack system and cables. The gas tanks were drained and cleaned before everything was done. The hull and gel coat is in excellent condition. Since the overhaul the boat has only 4hrs on it. Its still isn't broken in. Engine running at 15 min intervals at 2000 to 3000 rpms.The 4 hrs that it has been run for its break in procedure is to Jet Boat Performances specs. Currently running Rotello 15/40 oil and 91 octane cut 50/50 with 100 octane fuel. Its the Ultimate Ride!!!!!!!!!!! Asking $15,750 obo

« **Reply #1 on:** April 27, 2008, 09:47:09 PM »

At Nas

« **Reply #2 on:** April 27, 2008, 09:51:36 PM »

more pics

« **Reply #3 on:** April 27, 2008, 09:58:02 PM »

more pics

« **Reply #4 on:** April 27, 2008, 10:11:33 PM »

Is this the same boat that was listed on ebay tonight?

« **Reply #5 on:** April 28, 2008, 07:44:07 AM »

yes it is

« **Reply #6 on:** April 29, 2008, 06:21:40 PM »

Quote from: Miller on April 28, 2008, 07:44:07 AM

yes it is

hows the interior and stringers?
Trailer?

« **Reply #7 on:** April 29, 2008, 06:28:10 PM »

hello, im looking to buy a jet boat very soon i live in canada. a friend that inports boats ,is going to CA to get me one. i saw yours. i think its killer. intrested . so message me back thanks

« **Reply #8 on:** April 29, 2008, 11:05:25 PM »

Better jump on it Nate. It will help with your Miller withdrawal.

Quote from: n8dawg on April 29, 2008, 06:21:40 PM

hows the interior and stringers?
Trailer?

« **Reply #9 on:** April 30, 2008, 09:09:04 PM »

Quote from: bulldawg art on April 29, 2008, 11:05:25 PM

Better jump on it Nate. It will help with your Miller withdrawal.

It sure would!!!!

« **Reply #10 on:** April 30, 2008, 09:38:58 PM »

If ya don't mind me askin'.....Why ya sellin' already after Tom and Josh (and Rhonda

) just got done doin' all that work to it??

It is a Bitchin' boat tho,wish I had the money...you know it's gotta be done right with those boys doin' the work to it!

« **Reply #11 on:** May 01, 2008, 01:26:46 AM »

I have a lot of BS that I have to clear up, due to my EX business partner. The boat was at JBP and being finished before any of this came up. This is my first really solid jet boat, I know its done right, and thats why it hurts! But my business puts food on the table for my family! Family comes first!

« **Reply #12 on:** May 02, 2008, 03:07:54 PM »

Have a number so i can call? intrested in boat

« **Reply #13 on:** May 03, 2008, 01:21:48 PM »

Quote from: chancy on May 02, 2008, 03:07:54 PM

Have a number so i can call? intrested in boat

Check your PM

« **Reply #14 on:** May 05, 2008, 05:24:00 AM »

Price Reduced!! 14,000 (805-570-6634)

« **Reply #15 on:** May 12, 2008, 09:09:42 PM »

Still for sale!! Make offer?

« **Reply #16 on:** May 26, 2008, 12:16:31 PM »

Check it out
http://www.millercustomboats.com/galdesigns/other12.htm

« **Reply #17 on:** May 28, 2008, 11:14:35 AM »

Price has dropped to $11,000 boat needs to go!!

« **Reply #18 on:** May 28, 2008, 11:26:00 AM »

Quote from: Miller on May 28, 2008, 11:14:35 AM

Price has dropped to $11,000 boat needs to go!!

Damn, that's beyond a good deal, that's just cheap.

« **Reply #19 on:** May 29, 2008, 09:57:40 AM »

Sent you a PM! Very Interested.

« **Reply #20 on:** May 29, 2008, 05:05:34 PM »

The boat has sold. It sucks bad but I needed the cash! Thanks Tom, Rhonda, and Josh @ JBP! Thanks for helping me out with the build! You did a great job. I wish I had an opportunity to open that bitch up!!!! I was looking forward to a good summer of roosting around. But it is in good hands now. The new owner is a very good guy, and super stoked. Thanks again JBP!!!! Hopefully I will see u soon.

« **Reply #21 on:** May 29, 2008, 08:44:24 PM »

Thanks Anthony ! It was a wild ride ,Great customer, let us have our head and kind of do things our way ,with his input and oversight ,no scrimping ! Makes it simple and fun ! Whoever ended up with it you got a "smokin deal" We build you another soon Anthony! Tom

« **Reply #22 on:** May 30, 2008, 06:06:37 AM »

Wow, what can I say. This boat is beyond Bad Ass. I just hope I still have the conjonies to be worthy of it and the men who built it.

Anthony, Jet Boat Performance and So Cal Jet Boats thank you for helping me find my ride.

To all you seasoned Jet boat Vets be patient with me as I'm sure I will be asking some dumb ass questions in the near future.

Thanks again

Bonecrusher

« **Reply #23 on:** May 30, 2008, 06:39:19 AM »

Congrats on a finding a great boat.

Only wish I had room/funding for it when it became available.

« **Reply #24 on:** May 30, 2008, 06:40:02 AM »

And welcome to the site

Miller

Miller

Miller

Miller

76 Bonneville

Miller

n8dawg

crazyassandy

bulldawg art

n8dawg

skee

Miller

chancy

Miller

Miller

Miller

Miller

Miller

hotrod56cars

So.Bay*310*

Miller

jet boat performance

Bonecrusher

crewchief22

crewchief22

So.Bay310