Null


IMPATIENT 1

  • Karma: +0/-0
1987 tx-19 condor gullwing jetboat
« on: August 19, 2008, 01:24:23 PM »
1987 tx-19 condor gullwing
fresh 13.5 to 1 alum headed roller 505bbc
hi-nickel gm standard block , studded
eagle 4340 forged stroker crank(4.25)
eagle 4340 forged hbeam rods with l19s
je forged dome pistons
je extreme nitrous rings
je heavy walled wrist pin(severe duty)
new polished single plane intake, i spent 2 days getting the ports perfect as i could on it
allstate carb custom dominator 1050hp
1inch super sucker
new shoenfeld headers/copper header gaskets
new evac system along with puke tank set-up
motor is fully balanced
ported procomp alum 320cc heads, with faria valves, comp cams springs/locks/retainers/lash caps/spring cups
dart adjustable guide plates
manley custom length pushrods, .80 heavy wall
crane gold roller rockers with new arp studs and polylocks




nitrous express 2 stage nitrous system, 1st stage goes from 100-300, 2nd stage goes from 100-500 for a possible total of 800hp in nitrous. (1300.00 buck nitrous set-up!)
nitrous has its own fuel supply(pulls from its own tank, fed by its own pump/regulator/filter)
3 stage msd retard system, retards 20 degrees for easy crank up
msd btm ignition system, msd dizzy, msd blaster 2 coil



the pump is a dominator 12s that is fresh, and tight:
new american turbine stainless steel impellor
new don's pump service detailed inducer
new 17-4 race shaft
new loader
new bowl extension
new divertor cable
intake has adjustable shoe/rideplate
dominator split bowl with stuffer ring(impellor fits correctly with the matching surface)
new ultimate wearring
new thrust bearing
new seals/packing glands
freshly resealed place divertor
new intake pressure gauge set-up


all gauges are new, tach has recall and shift lite built in. seats are in great shape, carpet was replaced by me may 07. boat is all gel, no paint. the boat is a solid 7 outta 10, but runs a 10 outta 10, s.o.b. hauls the mail! runs upper 90's on motor with a passenger and full tanks , 100++ on the bottle. i've ran a compression and leak down test on the motor since breaking in, specs are still perfect after 20hrs of run time on the motor.

10k turnkey without nitrous and related electronics, 11k as it sits ready to race. serious buyers with cash in hand will be able to run the boat prior to $$$ changing hands, my local lake is 10minutes from my house.prices are firm! 580-326-7236

the trailer is getting new bunks weds evening, the trailer is road worthy, just ugly, needs a repaint and tlc
this boat is a monster outta the hole, it doesn't slip , its just moves
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

IMPATIENT 1

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #1 on: August 19, 2008, 01:25:16 PM »
YOU CAN REACH ME AT te_1051@hotmail.com   putting the boat on ebay soon
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

shawnthedrifter

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #2 on: August 19, 2008, 01:38:28 PM »
For 11k thats a sweet ride. Where were you a year ago?
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

IMPATIENT 1

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #3 on: August 19, 2008, 02:28:07 PM »
For 11k thats a sweet ride. Where were you a year ago?
building this boat ;D
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

pw_Tony

  • Karma: +12/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #4 on: August 19, 2008, 03:30:47 PM »
You got alot of work into this thing, why you selling
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

shawnthedrifter

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #5 on: August 19, 2008, 05:49:13 PM »
Ya...Why ya selling... :sly:
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

IMPATIENT 1

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #6 on: August 20, 2008, 06:16:26 AM »
Ya...Why ya selling... :sly:
seen to many 1200hp twin turbo sbc on youtube ;D i wanna build 1 and stick it in a lil hull like a predator or the lil cheyenne looking earl smith >:D i change boats bout every 2 yrs, i had a blown 475 in the tx-19 , had a block failure so i started completely over with the nitrous 505, fresh block, all new parts. the wife and kids want to tube and ski more as the kids have gotten older, so i'm selling the tx-19, buyin a cheap ass toon or bowrider, building the turbo sbc boat ;)
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

IMPATIENT 1

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #7 on: August 20, 2008, 06:25:27 AM »
c'mon , nobody needs a boat to tinker on this winter? if someone spent some time touching up the gel on this boat, and rebuilt the trailer, it'd be a solid 10 outta 10 boat, motor's at least 800hp by the impellor chart, pump is fresh and bullet proof, throw 2000hp at it if ya want, it'll handle it.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

koyota93

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #8 on: August 20, 2008, 04:56:44 PM »
Bump for a bad ass boat.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

IMPATIENT 1

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #9 on: August 21, 2008, 06:23:27 AM »
put 200bucks worth of new bunks on the trailer last nite, trailer will be getting a fresh set of tires next week then goin on ebay.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

nos1967

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #10 on: August 21, 2008, 08:33:06 AM »
Man ide pick this up in a second if i had just a few more g's  :banghead: Im a few days away from buying a nice jet boat for a couple grand less, but its not built like this beast. im sure it will do good on ebay though. good luck!
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

River Dad

  • Karma: +10/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #11 on: August 21, 2008, 11:28:03 PM »
Good luck, smokin deal for what's in it. 
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

IMPATIENT 1

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #12 on: August 29, 2008, 10:10:24 AM »
trailer is now rolling on new tires and boat's sitting on new bunks, also had the nozzle fitting for ftn's, turns out the 1 on the boat was 3.250 :o , needed to be 3.125 and it is now ;)
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

swtd 80

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #13 on: September 02, 2008, 04:56:58 PM »
how much difference did the nozzle make ? i have a 8 3/8  aqua color on a 750 hp tunnel dragster. never seen top end yet.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

IMPATIENT 1

  • Karma: +0/-0
Re: 1987 tx-19 condor gullwing jetboat
« Reply #14 on: September 26, 2008, 01:22:01 PM »
how much difference did the nozzle make ? i have a 8 3/8  aqua color on a 750 hp tunnel dragster. never seen top end yet.
intake pressure went up even though i pulled shoe out at the same time i did the nozzle reduction, so it did help quite a bit. i'm turnin out a 3.0 reducer tonite and gonna run that this weekend , see wtf it does with it.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

 


Null

SMFPacks CMS 1.0.3 © 2026