Null


ironman

  • Karma: +1/-0
75 Tahiti
« on: April 04, 2009, 02:13:41 PM »
This is my 75 Tahiti completely rebuilt 3 years ago. Every thing was stripped out of the boat including all the old rotted wood, interior, old motor, and all the other stuff that needed to go. Every bit of old rotted wood was replaced with new and was re glassed in, the stringers, sub floor, transom, and the bulkhead are on that list. Boat runs very well and gpsd at 71 mph. Interior, paint, motor, and pump were all new less than 3 years ago. Has a new bimini top for shade on those hot summer days. I have all receipts. Here are some specs on the motor, pump, and the rest of the boat.

Motor:

Gen V 454 BBC 4 bolt (all gen v bocks were 4 bolt main), Forged flat top pistons .020 w/ stock rods with ARP wave lock rod bolts, Compression approx 9.8:1 Runs great on 87 octane fuel, New SCAT forged steel crank (stock stroke), Total Seal rings, Clevite bearings, Comp Cams Extreme Marine 278 cam, Comp Cams true double roller timing chain, Melling oil pump, New SPI balancer, SFI approved flex plate, Rotating assembly balanced, Custom Built 10 qt oil pan. Motor sits on a custom built rail kit.

Heads:
Early closed chamber large oval BBC, Fully ported and polished, Large S.S.Valves, Comp Cams springs and retainers, Comp Cams 7/16 pushrods, Scorpion aluminum roller rockers rated for 800lb spring pressure

Fuel Delivery:
2 Custom built Stainless Steel 11 gal ea saddle tanks with senders in both tanks
Mallory comp 140 electric fuel pump, Mallory bypass regulator w/ liquid filled pressure guage, Holley 850 DP that sits on top of an Edlebroc Victor JR that has been port matched to the heads. Hei dist w/ hi output coil

Pump:
Berkeley 12 JC w/an”A” aluminum impellor, Dominater split bowl, AMT droop, Manual place diverter w/ FTN

Electrical:
Optima yellow top batt, 100 amp chrome 1 wire alt, Hi torq mini starter, Autometer white face marine gauges, all new wiring through out, Kenwood stereo, four 6-1/2” speekers, 8” powered marine bazooka bass tube

I have over $ 10,000 invested in this boat but I am only asking $6,000 OBO.Needs nothing ready to go No Trades need the $$$ If interested please call 559-903-5456







  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
BDS Machining   
Water Jet Cutting : Machine Shop Service
                Welding & Fabrication
                     559-903-5456

ironman

  • Karma: +1/-0
Re: 75 Tahiti
« Reply #1 on: April 04, 2009, 02:17:32 PM »
Here is more pics





  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
BDS Machining   
Water Jet Cutting : Machine Shop Service
                Welding & Fabrication
                     559-903-5456

Marcsrollin

  • Karma: +33/-0
Re: 75 Tahiti
« Reply #2 on: April 04, 2009, 06:53:37 PM »
WOW!! That has got to be the nicest Tahiti I have ever seen!
  • Boat #1: 1978 TX-19 Youngblood
  • Boat #2: 1994 24 foot Sundancer Pontoon
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Taco'd "a person or people that show up with one lake lice and a family of 50 and cram 3 people at a time on it with no disregard to boating rules or ethics. Usualy crap in toilets and throw shit paper in trash cans. Hang out at the boat ramp like its a swimming hole. Have zero insurance on anything they own and dont give two shits less about your property."

ironman

  • Karma: +1/-0
Re: 75 Tahiti
« Reply #3 on: April 04, 2009, 07:00:59 PM »
Thanks Mark, I put a ton of hours into this boat and I don't want to sell it but that is how things go sometimes.

Ironman
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
BDS Machining   
Water Jet Cutting : Machine Shop Service
                Welding & Fabrication
                     559-903-5456

 


Null

SMFPacks CMS 1.0.3 © 2026