New thermostat and oil pressure sensor. But my gauges aren't reading could someone tell me how to wire them up properly? There in only one screw on the top of both sensors

Sent from my SM-G900V using SoCal Jet Boats mobile app

Hmmm thanks seems simple enough I'll be messing with it Wednesday thanks any info helps keep it coming.... 

Sent from my SM-G900V using SoCal Jet Boats mobile app

Yeah the guy that had the boat before me had some pretty janky stuff going on with the electrical I'm having a feeling I'm gonna have to end up reworking all the wiring in the boat.. Even tho I don't that that's a bad idea.. But I'll check into that first hopefully that's it. thanks!

Sent from my SM-G900V using SoCal Jet Boats mobile app

That's exactly what is on there I'll pull the Teflon off right away and update thanks!

Sent from my SM-G900V using SoCal Jet Boats mobile app

Your gauge wires are hot and ground and you have one wire to the senders... You might just have a broken sender wire... Unhook it from the gauge and the sender put power to one end of the wire and use a test light at the other end if you have power good wire if you don't run a new wire !!!


Sent from my iPhone using SoCalJetBoats