Hello all ,
So installed mechanical pressure gauge and it showed as follows.
Idle 68 psi
2000 rpm 80 psi
4000 rpm 90 psi
5000 rpm 100 psi
Pulled oil filter and checked pressure relief and works fine. Installed another new filter. Ran it at havasu this last weekend and ran great but
No change has happend. Engine still bleeding oil and oil pressure is high. What else can I do to determine what is wrong ? Is there a relief valve in oil pump and if something is wrong with that would it cause to much pressure ? Trying to figure out without pulling engine. Any input would be appreciated.
Jeff
Sent from my iPhone using SoCal Jet Boats