There shoulda been an adapter, or 2 for dual carbs, (Look like an air cleaner base), two long straps with 4 holes each and 8 wingnuts with it. If not, look up the Scoop at Summit, they have the adapter kits in stock last I checked. (Was gonna adapt mine to single carb, but put the tunnel on instead.)

Ray

I think he may be talking about the linkage for the flutterbys. Look at "project Mooo", shows the linkage on Rays boat. Anybody else gotta pic of this?

Here's the installed scoop.  You can see the wingnuts and carb base adapters. Hopefully you have those. The bases are also slotted, so the scoop needs to be fully tightened into place where you want it before you start installing/adjusting the linkage. But assembly is pretty easy. put on the bases, air cleaners or flame arrestors, tighten down making sure the bases remain straight, then drop the scoop on and attach it with the stell straps and wingnuts. Then  install and adjust the linkage. The lever for the butterfly's is a splined shaft and the linkage is adjustable, so infininate possiblities exist with it. I like mine, although the butterflies and linkage arm are in for a titty pink anodizing, lol.






Ray

does any one in Vegas happen to have on of these laying around by chance? save me some time building one