Cooling issue 455 olds

« **Reply #25 on:** March 31, 2015, 11:37:56 PM »

Your right a gate would probly work just fine. I just like dissin the gate cause its twists your panties.

All BS aside I have had gates they worked on my past boats
On my current boat I could not get my block pressure down. Larger dumps didnt matter.
The solution that worked on my setup was the relief setup. I don't wanna get the guy off track to a solution. A gate is cheap. He has a RV already and as mentioned he has restriction in the block. Im sure he will get it with his gauge and get her going good again

« **Reply #26 on:** March 31, 2015, 11:50:32 PM »

Quote from: Chad krieger on March 31, 2015, 11:37:15 PM

Dan'l sounds like it's going to be a runner can't wait to see her its bin along time. Will be in avi in May 2 all weekend maybe stop by and see her if u have the time.

Sent from my iPhone using SoCalJetBoats mobile app

still have boxes o parts for the Miller...waiting on the machine shop...still need tires and wheels...and a stacked tank...build a apba legal "rudder"and a seat and a helmet and a lifeline jacket...and... wtf???

Dan'l

« **Reply #27 on:** April 03, 2015, 08:09:13 AM »

Thanks everyone for the info took jet out yesterday ran perfect 160* all day long

Sent from my iPhone using SoCal Jet Boats

« **Reply #28 on:** April 03, 2015, 12:01:23 PM »

Quote from: fullfam1 on April 03, 2015, 08:09:13 AM

Thanks everyone for the info took jet out yesterday ran perfect 160* all day long

Sent from my iPhone using SoCal Jet Boats

That's good to hear. What did you do to fix the issue?

Sent from my iPhone using SoCal Jet Boats

« **Reply #29 on:** April 03, 2015, 12:05:18 PM »

Stupid problem....when I dropped motor in oil pan was on top of inlet hose from jet constricting some flow, moved hose to side and secured then adjusted my pressure relief valve and problem solved

Sent from my iPhone using SoCal Jet Boats

« **Reply #30 on:** April 03, 2015, 12:48:51 PM »

Quote from: fullfam1 on April 03, 2015, 12:05:18 PM

Stupid problem....when I dropped motor in oil pan was on top of inlet hose from jet constricting some flow, moved hose to side and secured then adjusted my pressure relief valve and problem solved

Sent from my iPhone using SoCal Jet Boats

Been there-done that. Lmao.

GT

Sent from my SCH-I545 using SoCal Jet Boats mobile app

« **Reply #31 on:** April 03, 2015, 02:10:40 PM »

I just re routed my water lines to try to plan for that. Glad to hear I was thinking right. Also glad it is fixed.

Sent from my iPhone using SoCal Jet Boats

jet fever

Re: Cooling issue 455 olds

mash on it

Re: Cooling issue 455 olds

fullfam1

Re: Cooling issue 455 olds

74hondo

Re: Cooling issue 455 olds

fullfam1

Re: Cooling issue 455 olds

GT Jets

Re: Cooling issue 455 olds

74hondo

Re: Cooling issue 455 olds