Null


88CARRERA

  • Karma: +6/-0
help dizzy ?
« on: May 29, 2010, 10:40:03 PM »
so i got a new electronic dizzy from nordie. i am changing the intake and dizzy, what is the best way to mark it so i dont lose cyl #1 and have a no start concern. i dont want to get everything back together and have mized up wires or timing problems
chris
  • Boat #1: 88 carrera eclipse
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

GT Jets

  • Karma: +192/-0
Re: help dizzy ?
« Reply #1 on: May 29, 2010, 10:49:25 PM »
Bring the distributor up on the number one cylinder and "zero" the balancer to the tab and have a  :beer: ....Then when dropping in the new dizzy, make sure she is on number one and line up the (either hall effect or pick up coil) trigger to the switch and have another  :beer: , then turn it against the rotation about ten degrees....Viola! (which requires another  :beer: )

She should start and run good enough to get it timed.... :thumbup: But you will have to wait until you sober up.... :screwy:

GT
  • Boat #1: 1992 Carrera 20.5 Elite (I/O bitches)
  • Boat #2: 19' Bubble deck Jet BBC Berkeley
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
If i get some free time tonight at work, ill play with it and post it for everyone to see.

Time to man up and yank it John!  :banghead:
Ray

SS-201

  • Karma: +0/-0
Re: help dizzy ?
« Reply #2 on: June 01, 2010, 03:05:28 AM »
# 1 can be anywhere on the dizzy, when you find a spot mark it #1 and then put the wires in the right firing order. However some caps come with #1 on them jut drop the dizzy in and put the wires in right firing order also when you drop in the dizzy if it won't line up wit the shaft , just hold hand on dizzy and bump the motor to drop it in the pump gear.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

 


Null

SMFPacks CMS 1.0.3 © 2026