Ok so my fuel lines are leaking. But i CANNOT get them loose from the tank. There is no room in there to get a wrench in there and i just cant figure it out. The tanks are plastic and i think to remove them you have to cut them out. Any tips/tricks??


Sent from my iPhone using SoCal Jet Boats

They are stainless 6an fittings


Sent from my iPhone using SoCal Jet Boats

71 southwind 18 foot


Sent from my iPhone using SoCal Jet Boats

My dad had the thought of cutting "access holes" and covering them after with those round "access panels" but idk about cutting on my boat


Sent from my iPhone using SoCal Jet Boats

My dad had the thought of cutting "access holes" and covering them after with those round "access panels" but idk about cutting on my boat

Can you get at it from the front or back or along the hose?  Are you able to put a sneak bend into an old 11/16” open end wrench to form something like a distributor wrench?  How about a 11/16" crow’s foot on a long extension?

Cheers,

Joe

Offset wrench

Sent from my SCH-I535 using SoCalJetBoats mobile app

Cut the line and use a deep socket and deal with after it's off and try to spin the 90 off and then figure out a better way I rig it?


Sent from my iPhone using SoCal Jet Boats

Im picking up what ur putting down. Now what to use and how to cut the line off. Hmm.


Sent from my iPhone using SoCal Jet Boats