BBF CAM Setup

« **on:** October 29, 2007, 09:33:22 AM »

Ok, here's a quick question, at what degree(s) should the CAM be set in a fresh rebuild on a BBF. The rebuild is nothing radical.

Thanks, Greg

« **Reply #1 on:** October 29, 2007, 09:59:09 AM »

follow the cam grinders instructions, if you dont have them just put it straight up

« **Reply #2 on:** October 29, 2007, 10:51:15 AM »

follow the cam grinders instructions, if you dont have them just put it straight up

Thanks Ralph, I'll ask the guy who is doing the building then and see what he did. Greg

« **Reply #3 on:** October 29, 2007, 01:12:53 PM »

follow the cam grinders instructions, if you dont have them just put it straight up

If it has an early timing set 0* if it is a '73 and up 4* advanced
if no cam card.

« **Reply #4 on:** October 29, 2007, 03:21:12 PM »

If it has an early timing set 0* if it is a '73 and up 4* advanced
if no cam card.

It's that engine the blew up and CASCAR is rebuilding. I don't know what CAM he installed but he should know, I hope!!!