Need some advice

« **on:** June 06, 2015, 08:56:01 PM »

Starter went bad bottom mount bbc what's the best way to get it out , remove the water log exhaust manifold or can it be removed carefully with exhaust still in place. Need to some input thank you in advance.

« **Reply #1 on:** June 06, 2015, 09:43:59 PM »

I had to remove the log to get mine out...

Sent from my iPhone using SoCal Jet Boats

« **Reply #2 on:** June 06, 2015, 09:52:18 PM »

It can be removed without it but don't . It takes longer and by the time your done you will wish you had just taken the little extra time to remove the log!! Lol ask me how I know!!!

Sent from my iPhone using SoCalJetBoats

« **Reply #3 on:** June 06, 2015, 09:57:38 PM »

It's a lot easier to take the log off.

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** June 06, 2015, 10:10:17 PM »

Pull the log

SCJB iPhone

« **Reply #5 on:** June 06, 2015, 10:25:16 PM »

Ok i have heard that the log can warp is there truth to that anybody?

« **Reply #6 on:** June 06, 2015, 10:28:35 PM »

Quote from: 87hardin on June 06, 2015, 10:25:16 PM

Ok i have heard that the log can warp is there truth to that anybody?

It does happen, but in theory it's already warped. You just free it when you unload the pressure from the bolts.
GT

« **Reply #7 on:** June 06, 2015, 10:33:55 PM »

Ok gotcha, black rtv will work for gasket, was thinking of just having it rebuilt it not a wild compression engine or anything like that didn't think I should put a gear reduction

« **Reply #8 on:** June 06, 2015, 10:35:29 PM »

Thank you guy's for responding I do appreciate it.

87hardin

Need some advice

Handyman

Re: Need some advice

mobboss

Re: Need some advice

74 SleekCraft

Re: Need some advice

Roadrunner

Re: Need some advice

87hardin

Re: Need some advice

GT Jets

Re: Need some advice New

87hardin

Re: Need some advice

87hardin

Re: Need some advice