Well after an exceptional weekend in wonderful southern california i got home with the new motor! got everything unloaded except the block...i only have bolts for 460 crap gotta run and get some bolts here in a little bit to put it on the engine stand but basically here is everything i got in TRADE for the sanger hydro....I think i made out ok
Engine Specs
4.000 Stroke 454 70 Over
KB hyper pistons "they will not be used" I thought the motor was 80 over and no one makes an 80 over forged piston so i will be going forged!
although the block was machined for the hypers!
I should be able to use the rings still as long as everything is the same size! rings had instructions on both forged and hyper
Crower Cam with matching double springs!
Cam Specs
intake: duration 312 lift .598
exhaust: duration 322 lift .632
Came with a .20 crank internally balanced with mallory metal...however with the forged slugs it will half to be rebalanced!
All bearings came with the motor
Arp bolts on everything except the mains
Crane Cams 1.7 Ratio roller rockers with poly-locks
And 990 Heads that have been worked over really nicely
Pics Below
