Hey Brad....Get it all dialed in yet 
Let me know when and where u will be taking it out 

been busy gettin the house ready for the family...they started arriving today.

i hope to get it dialed in before long beach which is the first weekend of august....which only leaves me 2 weeks to work on it after i get back from the honeymoon....im going to pull the MSD stuff next week and send it in to get tested and repaired if needed...and also yank all the wiring out and start from scratch and take my time and do it right. even will color code shit right....no black positive wires 

started preppin the soldier for its first run at the upcoming race in long beach on Aug 8th-9th

popped the oil temp sensor in...



beefy ARP oil pump shaft



things that make you go hmmm  ....as mentioned, we were getting a studder in the motor under accelleration...this came apart when i was removing it out of #3....what concerns me is that it wasnt a fresh break...theres obviously corrosion in the poreclain.





new wires...

Badass Brad!

Two things, simply observations and personal opinion.

Why are you running $1.25 spark plugs?

And ditch the quick connects on the coil    , use a ring terminal and a dob of clear silicone on the threads, you will be amazed how easy something like that will keep you from making a start time 

Check out NGK spark plugs in the same heat range and reach, the difference in quality is crazy 

GT

Badass Brad!

Two things, simply observations and personal opinion.

Why are you running $1.25 spark plugs?

these trickflow heads came from ralph and those were the plugs that came with them. I replaced them with the same plugs for now. I will look into different plugs another day, but these will do just fine.

And ditch the quick connects on the coil    , use a ring terminal and a dob of clear silicone on the threads, you will be amazed how easy something like that will keep you from making a start time 

those will be going away when the boat gets re-wired completely this week. 

not sure yet...i did take it out for a few quick laps at big river about a month ago, but didnt get a chance to look at the tach while flat footin it up the river. I was too busy white knuckin it with a grin ear to ear. 

Wish I coulda been there to enjoy the fun   

You'lle have your day in the sun in a couple of weeks   

Nordie came over saturday morning to get the soldier ready for war ala the battle at long beach next weekend...



i got to work on the wiring....


he got to work repainting the pump pieces...


the droop was blue (off his boat) and the nozzle was red and yellow when it arrived

i was up for over 24 hours at this point...



this is the pile of shit remote oil filter relocation kit....it was leaking at the hose on the block side so i pulled it off and put teflon tape on it....still leaked....so i put a wrench on it to give it a little bit more...then pop. busted the cast aluminum adapter.     i HATE cast aluminum. ive now claimed 2 holley fuel pressure regulators, a fuel pump and now this...ARRGH. 


i got some MSD deutsch connectors...these things are pretty sweet....very easy and very solid connections. i was sick of having to cut the wires and patch them back together each time. this will make it easier and cleaner.




The scoop is the dominator scoop i borrowed from ralph along with the carb....it was primered grey and pretty blah....so chromeys concepts to the rescue...

Looking mean and clean Brad.   Hope all goes well and that I can make it down to LB this weekend.    Go Team SCJB

I didn't realize that the clear hose with the cloth braid can handle higher temps. (You have them between your valve covers and the headers.) I thought they were basically cold, low press only.

dont worry, they are plenty far away from the headers.

Light testing?? Go out there and drive it like you stole it!! How elese are you gonna know if it can hang with a full race?

shhhhhhh 

WOW you didnt scimp this go around those are the same style electrical connectors we use on the offroad stuff and they aint cheap! they will never fail you though!