Msd digital 6 box

« **on:** April 26, 2016, 07:14:01 PM »

Got a new msd and I want to mount under the dash on my boat where it's nice and dry if I do this I have to extend some of wires from my dash to my dizzy and coil Question is will it work should I go a gauge thicker on the wires u need to extend what are your thoughts

Sent from my iPhone using SoCal Jet Boats

« **Reply #1 on:** April 26, 2016, 07:27:06 PM »

Quote from: jamiemwedmore1234 on April 26, 2016, 07:14:01 PM

Got a new msd and I want to mount under the dash on my boat where it's nice and dry if I do this I have to extend some of wires from my dash to my dizzy and coil Question is will it work should I go a gauge thicker on the wires u need to extend what are your thoughts

Sent from my iPhone using SoCal Jet Boats

I wouldn't do it.

Do you know how much voltage goes through that deal? Keep it very near the engine.

JMO

GT

« **Reply #2 on:** April 26, 2016, 07:29:51 PM »

I agree with Glen in this. Mine has been pretty wet and never failed. I'm knocking on wood now. Lol

Sent from my iPhone using SoCal Jet Boats

« **Reply #3 on:** April 26, 2016, 07:32:17 PM »

The put out in excess of 500 volts. That could get ugly fast, not to mention the interference it could generate.

They can get pretty wet.

How about under the aft deck?

« **Reply #4 on:** April 26, 2016, 07:36:29 PM »

Quote from: GT Jets on April 26, 2016, 07:32:17 PM

The put out in excess of 500 volts. That could get ugly fast, not to mention the interference it could generate.

They can get pretty wet.

How about under the aft deck?

could try there doesn't take much.for water to go over the back I was just thinking of a dryer place

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** April 26, 2016, 07:59:36 PM »

Quote from: jamiemwedmore1234 on April 26, 2016, 07:36:29 PM

could try there doesn't take much.for water to go over the back I was just thinking of a dryer place

Sent from my iPhone using SoCal Jet Boats

With all do respect and understanding of your concern, they aren't that delicate.

We sank the raceboat twice on the same box. Lol

GT

« **Reply #6 on:** April 26, 2016, 09:59:24 PM »

Not sure if you are running a back seat or not, but I mounted mine on the back of the back seat. Should do the trick 👌🏽

Sent from my iPhone using SoCal Jet Boats

« **Reply #7 on:** April 27, 2016, 07:17:08 AM »

Mine is mounted off the stringer. My back seat goes right over it. So it's under the rear seat and I don't think it's ever been wet. Just an idea. Maybe some other can post a pic where they mounted they're as well and you'll figure out a great spot. :-)

« **Reply #8 on:** April 27, 2016, 07:22:46 AM »

This is the way I mounted mine right on the head

Sent from my iPhone using SoCal Jet Boats

« **Reply #9 on:** April 27, 2016, 11:04:03 AM »

Quote from: koby686 on April 26, 2016, 09:59:24 PM

Not sure if you are running a back seat or not, but I mounted mine on the back of the back seat. Should do the trick 👌🏽

Sent from my iPhone using SoCal Jet Boats

I did the same thing lol

« **Reply #10 on:** April 27, 2016, 11:33:36 AM »

Bulletproofcycles, solid location 😉

Sent from my iPhone using SoCal Jet Boats

« **Reply #11 on:** April 27, 2016, 11:36:27 AM »

Here's how I did mine

« **Reply #12 on:** April 27, 2016, 08:22:28 PM »

Mines mounted up high under the gunnel used the transom bolt that hold the pump on to secure my bracket

Sent from the Waterwheel crew

jamiemwedmore1234

Msd digital 6 box

GT Jets

Re: Msd digital 6 box

jimpen

Re: Msd digital 6 box

GT Jets

Re: Msd digital 6 box

jamiemwedmore1234

Re: Msd digital 6 box

GT Jets

Re: Msd digital 6 box

koby686

Re: Msd digital 6 box

Onthenos

Re: Msd digital 6 box

AnthonyH3

Re: Msd digital 6 box

BulletproofCycles

Re: Msd digital 6 box

koby686

Re: Msd digital 6 box

JetdreamN

Re: Msd digital 6 box

goin_up_river771

Re: Msd digital 6 box