Header water injection question

« **on:** July 18, 2018, 09:37:04 PM »

I hooked up my water lines. My T-valve has a new ball and spring but for some reason my passenger side header is getting way more water then the drivers side. It looked like it was coming out of the weep holes. I had about a 1/4” of water next to the stringer and it had only been idling for a couple mins. The other side was almost dry.

Sent from my iPhone using SoCal Jet Boats mobile app

« **Reply #1 on:** July 19, 2018, 04:18:56 AM »

Your t valve should not open at idle to let water to the pipes till like 1800-2000 rpm so if it's leaking water at idle there is an issue!! Unless ur boat is idling crazy hi!!

your friendly local v-drive owner

« **Reply #2 on:** July 19, 2018, 10:25:42 AM »

X2

Sent from my iPhone using SoCal Jet Boats

« **Reply #3 on:** July 19, 2018, 11:08:23 AM »

It’s idling at about 800-1000. I was running it in the hose which could be part of the issue. But I have a Y at the jet intake so water goes to the motor and the jet.

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** July 19, 2018, 01:59:46 PM »

Have you checked all your header water lines for clogs?

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** July 19, 2018, 05:46:16 PM »

Quote from: The_Dean_85 on July 19, 2018, 01:59:46 PM

Have you checked all your header water lines for clogs?

Sent from my iPhone using SoCal Jet Boats

That’ll have to be my next check

Sent from my iPhone using SoCal Jet Boats mobile app

Rogers Hopeful

Header water injection question

aquaholic72

Re: Header water injection question

angermgmt

Re: Header water injection question

Rogers Hopeful

Re: Header water injection question

The_Dean_85

Re: Header water injection question

Rogers Hopeful

Re: Header water injection question