Recived my Clay Smith Fuel Pump today.  Then I was asked if I got the bottom feed kit.  I didn't know there was such a thing to order or I would have.  So can someone tell me what I need to call and order?

I would have asked the person that asked you...      J/K

this...

http://www.edelbrock.com/automotive_new/mc/fuel_pumps/fuel_pumps_main.shtml



Bottom Feed Fuel Pump Plate Kits
These kits allow you to use Edelbrock Street and Racing Fuel Pumps (and other manufacturers' 6-valve pumps) on 1970-1/2 to 1981 Camaros or other vehicles where there is a space problem. AN fittings can be used and the fuel lines can be routed more neatly through the engine compartment. Kits include a machined aluminum plate along with all necessary gaskets and plugs. They replace the lower section of the fuel pump and allow bottom feed fuel line fittings rather than the opposing side feed fittings on most aftermarket pumps. The Edelbrock Fuel Pump Kits do not change the flow or pressure ratings of the pump.   
 
Fuel Pump Kit for Street Fuel Pumps (3/8" NPT) #1797
Fuel Pump Kit for Racing Fuel Pumps (1/2" NPT) #1798
 
You can get it at summit:

3/8" NTP's = http://store.summitracing.com/partdetail.asp?autofilter=1&part=EDL%2D1797&N=700+115&autoview=sku
1/2" NTP's = http://store.summitracing.com/partdetail.asp?autofilter=1&part=EDL%2D1798&N=700+115&autoview=sku

its not a must...just makes things easier if its crowded around the fuel pump.

Brad,

Will this work on the Clay Smith fuel pump?

sorry i didnt respond, i thought i told you.
yes it will work

3/8's will work fine, call me if you want

When installing the bottom feed adapter plate. would you use lock-tite on the threads?