Would this set up work for me

« **on:** March 23, 2008, 08:02:57 AM »

Im looking for a ignition set up, i have the Mallory and a MSD coil but dont know what else i need to make it work?

found this one, think it will work ok?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=220212659893&ssPageName=STRK:MEWA:IT&ih=012
2sav

« **Reply #1 on:** March 23, 2008, 08:39:26 AM »

pro comp=no good
msd-6al=good

« **Reply #2 on:** March 23, 2008, 09:07:05 AM »

Quote from: Ralph Brunt on March 23, 2008, 08:39:26 AM

pro comp=no good
msd-6al=good

Yeah, i kinda thought so

This falls under the "cheap isnt good......And good isnt cheap" Right

What about Mallory ignition?
2sav

« **Reply #3 on:** March 23, 2008, 09:19:44 AM »

I just got this for '80 nordic for $128.50

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=003&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=130207014466&rd=1

« **Reply #4 on:** March 23, 2008, 09:36:16 AM »

Quote from: HDriderTH on March 23, 2008, 09:19:44 AM

I just got this for '80 nordic for $128.50

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=003&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=130207014466&rd=1

Phuck!

Just when I thought I had tried every search for a mag...

« **Reply #5 on:** March 23, 2008, 09:42:13 AM »

Chill brotha, they come up. I need this for the other Mag I got from that link you sent me:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=170203401763&rd=1

I just found an MSD crank trigger distributor and pick up for $100 on craigs

« **Reply #6 on:** March 23, 2008, 09:45:45 AM »

Got one of these for $150:

http://cgi.ebay.com/ebaymotors/MSD-7908-Magneto-Pro-Mag-12LT-Billet-Aluminum-Summit_W0QQitemZ330217999257QQihZ014QQcategoryZ33690QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

« **Reply #7 on:** March 23, 2008, 09:49:06 AM »

If I were you 2sav I would go the Summit equipment route. Made in USA better stats than the MSD and they few I have seen around here were performing pretty well. Almost $100 less than the 6al and you get digital circuitry. Ask Tom at JBP he likes em to.

$143.99

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D850600&N=700+400304+4294925143+115&autoview=sku

« **Reply #8 on:** March 23, 2008, 09:52:33 AM »

Quote from: HDriderTH on March 23, 2008, 09:19:44 AM

I just got this for '80 nordic for $128.50

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=003&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=130207014466&rd=1

thanks terry.....you da man

« **Reply #9 on:** March 23, 2008, 09:59:31 AM »

Heres another:

http://cgi.ebay.com/ebaymotors/chevy-magneto-w-external-coil-and-5-recall-tach-pickup_W0QQitemZ300207403975QQihZ020QQcategoryZ133192QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

« **Reply #10 on:** March 23, 2008, 10:03:24 AM »

and another, good one Rod:

http://cgi.ebay.com/ebaymotors/Sprint-Car-Race-Car-Vertex-SBC-Magneto_W0QQitemZ270221532749QQihZ017QQcategoryZ107066QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

« **Reply #11 on:** March 23, 2008, 10:08:32 AM »

Quote from: Blue on March 23, 2008, 09:49:06 AM

If I were you 2sav I would go the Summit equipment route. Made in USA better stats than the MSD and they few I have seen around here were performing pretty well. Almost $100 less than the 6al and you get digital circuitry. Ask Tom at JBP he likes em to.

$143.99

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D850600&N=700+400304+4294925143+115&autoview=sku

Thanks Blue, will it work with the dizzy i have now? or do i have to buy the whole kit & kaboodle

2sav

« **Reply #12 on:** March 23, 2008, 10:10:13 AM »

Quote from: 2savage4you on March 23, 2008, 10:08:32 AM

Thanks Blue, will it work with the dizzy i have now? or do i have to buy the whole kit & kaboodle
2sav

'

If the Mallory has 3 wires coming off it then you are good to go my friend...

« **Reply #13 on:** March 23, 2008, 10:13:50 AM »

Quote from: Blue on March 23, 2008, 10:10:13 AM

'

If the Mallory has 3 wires coming off it then you are good to go my friend...

It does Thanks. I think i will have to pick that one up, thanks again for the link.
2sav

« **Reply #14 on:** March 23, 2008, 12:09:18 PM »

Quote from: Blue on March 23, 2008, 09:49:06 AM

If I were you 2sav I would go the Summit equipment route. Made in USA better stats than the MSD and they few I have seen around here were performing pretty well. Almost $100 less than the 6al and you get digital circuitry. Ask Tom at JBP he likes em to.

$143.99

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D850600&N=700+400304+4294925143+115&autoview=sku

i always wondered about those

just always went with what i knew

http://www.performanceboats.com/html/forums/showthread.php?t=1895

2savage4you

Would this set up work for me

Ralph Brunt

Re: Would this set up work for me

2savage4you

Re: Would this set up work for me

HDriderTH

Re: Would this set up work for me

hotrod56cars

Re: Would this set up work for me

HDriderTH

Re: Would this set up work for me

HDriderTH

Re: Would this set up work for me

Blue

Re: Would this set up work for me

Nordie

Re: Would this set up work for me

HDriderTH

Re: Would this set up work for me

HDriderTH

Re: Would this set up work for me

2savage4you

Re: Would this set up work for me

Blue

Re: Would this set up work for me

2savage4you

Re: Would this set up work for me

Ralph Brunt

Re: Would this set up work for me New