BBC Upswept coated headers

« **on:** May 29, 2008, 07:40:28 AM »

I'm selling a set of BBC Shoenfeld upswept (black) Embee coated headers. They have now, 2 trips on them. They have evac.tubes w/new header bolts. Asking $400 FIRM. Plus shipping.

Go to Performanceboats.com under classifieds for pictures. Can't upload pics here at work. Too damn confusing. Thanks.

« **Reply #1 on:** May 29, 2008, 10:01:08 AM »

Didn't see them there.

« **Reply #2 on:** May 29, 2008, 10:39:49 AM »

In the PARTS SPAM, maybe 2nd page.

« **Reply #3 on:** May 29, 2008, 11:00:51 AM »

In case anyone is interested.
http://www.performanceboats.com/html/forums/showthread.php?t=9034&highlight=Shoenfeld

pics are down about half way. Wish I were build a BBC right now. This is a good deal and a great buy.

« **Reply #4 on:** May 29, 2008, 11:14:19 AM »

Thanks man for doing that. The computer at work won't allow me to do that cut/copy/paste deal.

« **Reply #5 on:** May 30, 2008, 07:34:43 AM »

BUMP......Need these gone! Saving up for some wet rewarders.

« **Reply #6 on:** May 30, 2008, 08:09:55 AM »

« **Reply #7 on:** May 30, 2008, 12:59:28 PM »

Is there a muffler to fit something that short? Or would you have to use a Suppertrapp?

« **Reply #8 on:** May 30, 2008, 02:33:45 PM »

Quote from: crewchief22 on May 30, 2008, 12:59:28 PM

Is there a muffler to fit something that short? Or would you have to use a Suppertrapp?

If you use the straight through , louvered core type muffs , they might hang out a bit if at all . There is also a really short , corkscrew type muff for those short apps .

-beerjet-

« **Reply #9 on:** May 30, 2008, 06:47:12 PM »

Quote from: crewchief22 on May 30, 2008, 12:59:28 PM

Is there a muffler to fit something that short? Or would you have to use a Suppertrapp?

Shoenfeld do make mufflers/baffles for these headers. You'd have to drill the holes though.

« **Reply #10 on:** May 30, 2008, 07:53:44 PM »

The more I look at them I don't think they will fit inside my hull. I only have 10 1/2" from the forward exhaust port to the gunnel & only 9" at the rear

If they cleared I'd have a repeat of what Ralph did to his Hondo.

« **Reply #11 on:** June 02, 2008, 04:44:17 PM »

Today bump........$300 FIRM!

« **Reply #12 on:** June 03, 2008, 08:30:09 PM »

Any idea on shipping to 78753? I am going to measure my daycruiser and see ho far up they have to come to clear my transom in the rear.

« **Reply #13 on:** June 04, 2008, 02:14:23 PM »

Quote from: countryboyaustin on June 03, 2008, 08:30:09 PM

Any idea on shipping to 78753? I am going to measure my daycruiser and see ho far up they have to come to clear my transom in the rear.

Send me your whole address to where it will be shipped, and i'll let you know. Thanks, Nandi

« **Reply #14 on:** June 04, 2008, 03:26:23 PM »

11500 pollyanna avenue
austin,tx
78753

« **Reply #15 on:** June 04, 2008, 03:33:26 PM »

Quote from: countryboyaustin on June 04, 2008, 03:26:23 PM

11500 pollyanna avenue
austin,tx
78753

You could have just sent me a PM instead of letting everyone know your address.

« **Reply #16 on:** June 04, 2008, 03:37:06 PM »

Just to ball-park the shipping price, I'd say anywhere from 25-35 bucks would be my guess. I ordered the headers from back east myself. It cost me I think25-28 bucks. Id say, $380 bucks should cover for the headers and shipping. You okay with that price??

« **Reply #17 on:** June 19, 2008, 07:34:42 AM »

Bump.......must go! Need fuel for the boat during the 4th of july weekend.

PM me if interested. will negotiate.

« **Reply #18 on:** July 03, 2008, 01:45:53 PM »

Sold!!!!

« **Reply #19 on:** August 08, 2008, 04:48:46 PM »

« **Reply #20 on:** June 04, 2015, 12:44:22 PM »

Do u still have them?

Sent from my iPhone using SoCalJetBoats

« **Reply #21 on:** June 08, 2015, 10:59:39 AM »

Quote from: loweryjennifer on June 04, 2015, 12:44:22 PM

Do u still have them?

Sent from my iPhone using SoCalJetBoats

This ad is from 2008, it says they sold a few posts up

Sent from my iPhone using Tapatalk

« **Reply #22 on:** June 08, 2015, 03:40:49 PM »

Quote from: loweryjennifer on June 04, 2015, 12:44:22 PM

Do u still have them?

Sent from my iPhone using SoCalJetBoats

I bought them and sold them a long long time ago. My brother has some stainless steel one that he might be selling.

« **Reply #23 on:** June 08, 2015, 04:11:10 PM »

Ok. Can u check. Thank u. Sorry just making sure that u sold them.

Sent from my iPhone using SoCalJetBoats

« **Reply #24 on:** June 09, 2015, 01:56:43 PM »

Quote from: loweryjennifer on June 08, 2015, 04:11:10 PM

Ok. Can u check. Thank u. Sorry just making sure that u sold them.

Sent from my iPhone using SoCalJetBoats

He said $600. They are stainless with slip on mufflers and collectors

So.Bay*310*

GAWnCA

So.Bay*310*

GAWnCA

So.Bay*310*

So.Bay*310*

hotrod56cars

crewchief22

beerjet

So.Bay*310*

crewchief22

So.Bay*310*

countryboyaustin

So.Bay*310*

countryboyaustin

So.Bay*310*

So.Bay*310*

So.Bay*310*

Beaveretriever

jetboat jim

loweryjennifer

bkillgore01

Beaveretriever

loweryjennifer

Beaveretriever

So.Bay310

So.Bay310

So.Bay310

So.Bay310

So.Bay310

So.Bay310

So.Bay310

So.Bay310

So.Bay310

So.Bay310