Upswept BBC Headers

« **on:** July 28, 2008, 01:28:26 PM »

i just found a set of o/t wet headers for my new motor. I had bought the headers on the site about 1 mth ago. They are Shoenfeld upswepts that are ceramic coated black. the guy i bought them from said that they have only been run a few times. they look really good. here is the post from when i bought them. Make me an offer if your interested, im going to try and sell these and save some money for the wet headers. http://www.socaljetboats.com/index.php?topic=3950.0 in the thread someone asked if you can put a muffler in them because they are so short, well the answer is yes. Shoenfeld makes them and they are about $30 per side.

Thanks
The Beav

« **Reply #1 on:** July 28, 2008, 10:35:12 PM »

Geez Dave. Those sure didnt last long

J/K

« **Reply #2 on:** July 28, 2008, 11:02:12 PM »

Well Bob, i figure if i can sell these then i can get the wet ones. If not then the ones i have will be on the boat. Then after we run it at Elsinore then i might put mufflers on them, if they are to loud and what i mean by to loud is my ears bleading, then i will put some type of muffler on them. BTW i got the fiber glass done on the rear of the boat and i installed the exhaust covers for the transom, looks good, i will post pics later

« **Reply #3 on:** July 29, 2008, 03:39:33 PM »

Almost time to go get that new motor

. Stock the fridge Jason.

« **Reply #4 on:** July 30, 2008, 10:35:00 AM »

hello,what size and dia.are the primary tubes and collector dia.?thanks , Jim

« **Reply #5 on:** July 30, 2008, 02:26:27 PM »

i believe that the tubes are 2" or 2 1/4" and the collector is 4" if you get on the Schoefeld web site they have the dimensions

« **Reply #6 on:** July 30, 2008, 03:04:26 PM »

hello again,went to web site. they have several sizes.need part #. how much? Jim

« **Reply #7 on:** July 30, 2008, 07:40:50 PM »

pm sent

« **Reply #8 on:** July 31, 2008, 04:28:29 PM »

the part number was not on the headers but i measured them and they are 2 1/4 so the part number would be 2318

« **Reply #9 on:** August 06, 2008, 03:00:41 PM »

Want to trade (if they will work)? See CBB Headers on page two.

« **Reply #10 on:** August 06, 2008, 03:28:44 PM »

do you have the part number or anything for them? i would like to know how tall they are because im putting in a new 454 and im not sure where they are going to sit on my boat, its a GlenCoe. The ones i have look good and they are coated black. Are you going to use them for racing?

« **Reply #11 on:** August 06, 2008, 03:48:19 PM »

They appear to be about 13 inches from the center of the port to the center of the collector. My best guess on a part number is 11000-3, but who knows after they have been coated. Yes, I want to use them in NJ. Note that they have rectangular ports.

« **Reply #12 on:** August 06, 2008, 05:24:44 PM »

mine might be round ports, i will have to look

« **Reply #13 on:** August 06, 2008, 05:31:43 PM »

also that part number that you gave me is for V-Drive headers. are they for a V-Drive? if they are they will not work, i have a jet.

« **Reply #14 on:** August 06, 2008, 05:43:36 PM »

I have a set of oval port headers, but they need to be ceramic coated. They are just a little longer, but are the same height.

I have a 19' Schiada jet and on my boat they only clear the transum by an inch (too close for confort, even with a heat shield).

It just depends on how your hull is designed.

« **Reply #15 on:** August 06, 2008, 05:47:31 PM »

do you have pictures of the other headers? or do you have any wet headers?

« **Reply #16 on:** August 06, 2008, 06:36:17 PM »

I will get you some.

« **Reply #17 on:** August 06, 2008, 06:37:58 PM »

some wet headers

or some pics. i really want some wet headers, i have the bassett "t" already all i need now is the headers, if you have some, then lets trade.

« **Reply #18 on:** August 07, 2008, 03:23:05 PM »

Sorry, I only have the dry. Thanks anyway.

« **Reply #19 on:** August 07, 2008, 03:49:27 PM »

There is a set on Ebay.

« **Reply #20 on:** August 07, 2008, 09:42:04 PM »

if you would like to trade my upswepts for your over the tops, we can work something out for when and where?

« **Reply #21 on:** August 08, 2008, 11:57:58 AM »

pm sent

Beaveretriever

flytime

Beaveretriever

flytime

jetboat jim

Beaveretriever

jetboat jim

Beaveretriever

Beaveretriever

Bull20

Beaveretriever

Bull20

Beaveretriever

Beaveretriever

Bull20

Beaveretriever

Bull20

Beaveretriever

Bull20

Bull20

Beaveretriever

jetboat jim