Indmar manifolds

« **Reply #25 on:** October 02, 2016, 03:40:38 PM »

Where could I get the flaps for the exhaust tips?

Sent from somewhere in Cali

« **Reply #26 on:** October 03, 2016, 12:29:12 PM »

Bump

Sent from somewhere in Cali

« **Reply #27 on:** October 03, 2016, 01:49:51 PM »

Have you tried

http://www.marineindustrieswest.com/GroupCatProducts.cfm?CatId=773,97&group_id=62&page=1&CFID=7832484&CFTOKEN=289fbb7-c79137a1-3675-49d3-b022-ff761e347649

http://eddiemarine.com/exhaust-and-accessories/exhaust-tips-and-flaps-1

« **Reply #28 on:** October 03, 2016, 05:05:39 PM »

No. I was wondering how they stay in a style like the tips I have. It only has one hole

Sent from somewhere in Cali

« **Reply #29 on:** January 09, 2017, 04:54:45 PM »

Does any one have pictures of how there exhaust is set up from risers to tips. I just installed my exhaust and need to finish it. Just want to make sure I do it right.

Sent from somewhere in Cali

« **Reply #30 on:** January 09, 2017, 05:19:03 PM »

Quote from: coors909 on January 09, 2017, 04:54:45 PM

Does any one have pictures of how there exhaust is set up from risers to tips. I just installed my exhaust and need to finish it. Just want to make sure I do it right.

Sent from somewhere in Cali

From pump, to tee, tee to rear of manifolds, front of manifolds to front of block, from thermostat housing to risers.

You will need the stainless restrictor plates between the manifold and riser.

GT

« **Reply #31 on:** January 09, 2017, 05:36:29 PM »

Thank you. I want to know what to use from the riser to the exhaust tip. I have rubber hose is that all I need?

Sent from somewhere in Cali

« **Reply #32 on:** January 09, 2017, 06:02:55 PM »

Quote from: coors909 on January 09, 2017, 05:36:29 PM

Thank you. I want to know what to use from the riser to the exhaust tip. I have rubber hose is that all I need?

Sent from somewhere in Cali

Yep, should be all you need, the water leaves the riser around the outlet and cools the exhaust.

GT

« **Reply #33 on:** January 09, 2017, 07:55:06 PM »

Quote from: GT Jets on January 09, 2017, 06:02:55 PM

Yep, should be all you need, the water leaves the riser around the outlet and cools the exhaust.

GT

Awesome thank you. I need to still get the flaps for the tips and the exhaust.

Sent from somewhere in Cali

« **Reply #34 on:** January 14, 2017, 06:34:39 PM »

Where could I get some good bolts for my exhaust? The length is where I'm having a problem 1" 1/2". Would I be able to use 1 1/4" bolts?

Sent from somewhere in Cali

« **Reply #35 on:** January 14, 2017, 06:56:50 PM »

Quote from: coors909 on January 14, 2017, 06:34:39 PM

Where could I get some good bolts for my exhaust? The length is where I'm having a problem 1" 1/2". Would I be able to use 1 1/4" bolts?

Sent from somewhere in Cali

Fastenall?

« **Reply #36 on:** January 14, 2017, 07:08:06 PM »

Quote from: GT Jets on January 14, 2017, 06:56:50 PM

Fastenall?

I'm not familiar with them. Do they make make marine stuff?

Sent from somewhere in Cali

« **Reply #37 on:** January 14, 2017, 07:13:56 PM »

Quote from: coors909 on January 14, 2017, 07:08:06 PM

I'm not familiar with them. Do they make make marine stuff?

Sent from somewhere in Cali

Hardware distributor.

https://www.fastenal.com/

Also, the Ace Hardware down the street, carries an amazing selection of hardware.

« **Reply #38 on:** January 14, 2017, 08:06:09 PM »

Quote from: GT Jets on January 14, 2017, 07:13:56 PM

Hardware distributor.

https://www.fastenal.com/

Also, the Ace Hardware down the street, carries an amazing selection of hardware.

Ok, thank you. Is this where you would by your exhaust bolts from? I just want to make sure I get the right stuff.

Sent from somewhere in Cali

« **Reply #39 on:** January 14, 2017, 08:38:33 PM »

I use them for work once in a while.

For my personal stuff I either cruise down to my local hardware store or use McMaster Carr on line. If McMaster don't have it, you don't need it. Lol

https://www.mcmaster.com/

« **Reply #40 on:** January 14, 2017, 09:35:17 PM »

Quote from: GT Jets on January 14, 2017, 08:38:33 PM

I use then for work once in a while.

For my personal stuff I either cruise down to my local hardware store or use McMaster Carr on line. If McMaster don't have it, you don't need it. Lol

https://www.mcmaster.com/

Awesome. I know McMaster from when I used to work in the machine shop. Forgot all about them. I bought some from home depo but they are cheap.

Sent from somewhere in Cali

« **Reply #41 on:** January 14, 2017, 09:49:21 PM »

Quote from: coors909 on January 14, 2017, 09:35:17 PM

Awesome. I know McMaster from when I used to work in the machine shop. Forgot all about them. I bought some from home depo but they are cheap.

Sent from somewhere in Cali

Technically speaking, grade 8 is grade 8.

GT

« **Reply #42 on:** January 15, 2017, 09:19:53 AM »

Quote from: GT Jets on January 14, 2017, 09:49:21 PM

Technically speaking, grade 8 is grade 8.

GT

Would grade 8, stainless steel be good?

Sent from somewhere in Cali

« **Reply #43 on:** January 15, 2017, 09:34:49 AM »

Quote from: coors909 on January 15, 2017, 09:19:53 AM

Would grade 8, stainless steel be good?

Sent from somewhere in Cali

No such animal.

Stainless is graded differently than carbon steel.

GT

« **Reply #44 on:** January 15, 2017, 10:03:08 AM »

Quote from: GT Jets on January 15, 2017, 09:34:49 AM

No such animal.

Stainless is graded differently than carbon steel.

GT

Didn't know that. What should I use for the exhaust bolts? Stainless or carbon steel?

Sent from somewhere in Cali

« **Reply #45 on:** January 15, 2017, 10:43:03 AM »

Quote from: coors909 on January 15, 2017, 10:03:08 AM

Didn't know that. What should I use for the exhaust bolts? Stainless or carbon steel?

Sent from somewhere in Cali

http://m.homedepot.com/p/Crown-Bolt-3-8-in-16-x-1-3-4-in-Yellow-Zinc-Grade-8-Hex-Bolt-86138/203537974

These are 1-3/4" long, but you get the idea.

The gold color is cadmium, which is a mil spec for corrosion resistance, no longer done in the US.

GT

« **Reply #46 on:** January 15, 2017, 06:14:55 PM »

Quote from: GT Jets on January 15, 2017, 10:43:03 AM

http://m.homedepot.com/p/Crown-Bolt-3-8-in-16-x-1-3-4-in-Yellow-Zinc-Grade-8-Hex-Bolt-86138/203537974

These are 1-3/4" long, but you get the idea.

The gold color is cadmium, which is a mil spec for corrosion resistance, no longer done in the US.

GT

Thank you. I definitely owe you more than one cold one. I hope I can make to an event that your at this year to repay the favor.

Sent from somewhere in Cali

« **Reply #47 on:** January 15, 2017, 06:24:15 PM »

Quote from: coors909 on January 15, 2017, 06:14:55 PM

Thank you. I definitely owe you more than one cold one. I hope I can make to an event that your at this year to repay the favor.

Sent from somewhere in Cali

You don't owe me anything brother, but would love to have a beer or two with you.

GT

« **Reply #48 on:** January 15, 2017, 11:07:12 PM »

Dale Mcfadden in Ontario. Awesome industrial suply store. Off of Grove just south of Mission. Google it.

« **Reply #49 on:** January 17, 2017, 08:21:28 AM »

Quote from: GT Jets on January 15, 2017, 06:24:15 PM

You don't owe me anything brother, but would love to have a beer or two with you.

GT

Thank you. I will be at an event this year. Hopefully with my boat

Sent from somewhere in Cali

coors909

coors909

sevans01

coors909

coors909

GT Jets

coors909

GT Jets

coors909

coors909

GT Jets

coors909

GT Jets

coors909

GT Jets

coors909

GT Jets

coors909

GT Jets

coors909

GT Jets

coors909

GT Jets

el mojado

coors909