Do a search of this site, I remember seeing some thing along this line years ago. It will also make the boat noisy.

Damn that looks good!! Well I ended up putting new carpet in. Still turned out good but I appreciate the info guys.

Sent from my LM-V405 using SoCal Jet Boats mobile app

What year and make is your boat pictured above?


Sent from my iPhone using SoCal Jet Boats

'78 Eliminator Bubbledeck

Sent from my Pixel 3 XL using SoCal Jet Boats mobile app

Do it!! It's totally worth the effort.

Sent from my Pixel 3 XL using SoCal Jet Boats mobile app

Would like to do this to my bilge ? What’s it called ? Bilge coat paint ? I’m learning? Thank you for the advice


Sent from my iPhone using SoCal Jet Boats mobile app

Got any more pics of your boat?


Sent from my iPhone using SoCal Jet Boats

I'll post more pics. I have a thread on the build of that boat, but couldn't find it the other day.

Would like to do this to my bilge ? What’s it called ? Bilge coat paint ? I’m learning? Thank you for the advice


Sent from my iPhone using SoCal Jet Boats mobile app

I used gelcoat mixed 1:1 with 27x1 clear. That's what people refer to as "flowcoat". I spent a ton of time prepping and that's why it came out as smooth as it did. Some guys will go further than I did and wet sand then buff out the floors after spraying the gel.

Not sure where you're located, but Shurfab in Ontario, CA carries all this stuff they're very knowledgeable. They provide most of the local boat manufacturers with resin, glass, balsa, and gelcoat.

Here's a before pic. I'll post more this afternoon

Sent from my Pixel 3 XL using SoCal Jet Boats mobile app

I love the white floor. Looks good. And I LOVE that Ford engine in it.

Sent from my LG-TP450 using SoCal Jet Boats mobile app