Null


SpectraRyan

  • Karma: +2/-0
Sub floor vs stringers
« on: April 01, 2017, 12:12:08 PM »
I just picked up this Spectra 19 and I'm toying with different ideas inside the hull.  I'm gonna be pulling the floor out anyways as it has a couple soft spot. My question is what is good on these boats. Should I stick with a quarter stringer and sub floor from there forward. Should I do a single center stringer from motor box forward and then bulkheads every so many feet. Or replace the motor box and run 2 full length stringers all the way. I like having a floor. Makes it eiser to walk and must stuff. I feel like with 2 stringers I can't put a floor on top because it will put the seats way up. I've seen it done so Manny different ways. Right now I'm leaning towards a center stringer with bulkheads and a floor on top of that. What's everyone's opinion.


Sent from my SM-G920T using SoCal Jet Boats mobile app

  • Boat #1: 1998 Advantage 27 Victory BR
  • Boat #2: 1975 Spectra 19 jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1998 Advantage 27 Victory
1975 Spectra 19
2011 Seadoo GTI130

BCouey

  • Karma: +11/-0
Re: Sub floor vs stringers
« Reply #1 on: April 01, 2017, 01:06:57 PM »
If your going big power full stringer with a floor between the stringers. If it's just a cruiser I'd stick with 1/4 stringer for more room


Sent from my iPhone using SoCal Jet Boats
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

BCouey

  • Karma: +11/-0
Re: Sub floor vs stringers
« Reply #2 on: April 01, 2017, 01:07:32 PM »
But that said, I ran 700+hp in a quarter stringer Tahiti with no issues


Sent from my iPhone using SoCal Jet Boats
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

SpectraRyan

  • Karma: +2/-0
Re: Sub floor vs stringers
« Reply #3 on: April 01, 2017, 01:23:42 PM »
Not going crazy power. Maybe 500 to 600hp. I'm sure full stringer is definitely the strongest. I'm more concerned about it through rough water. I primarily boat between needles and havasu. Lots of big boats and chop.

Sent from my SM-G920T using SoCal Jet Boats mobile app

  • Boat #1: 1998 Advantage 27 Victory BR
  • Boat #2: 1975 Spectra 19 jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1998 Advantage 27 Victory
1975 Spectra 19
2011 Seadoo GTI130

buckskin

  • Karma: +0/-0
Re: Sub floor vs stringers
« Reply #4 on: April 01, 2017, 02:48:23 PM »
Do you intend to replace the tanks? What kind of shape are they in?

Sent from my Z981 using SoCal Jet Boats mobile app

  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

SpectraRyan

  • Karma: +2/-0
Re: Sub floor vs stringers
« Reply #5 on: April 01, 2017, 03:35:52 PM »
I do want to go aluminum. They don't seem to be in bad shape. I've just never been a fan of fiberglass tanks

Sent from my SM-G920T using SoCal Jet Boats mobile app

  • Boat #1: 1998 Advantage 27 Victory BR
  • Boat #2: 1975 Spectra 19 jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1998 Advantage 27 Victory
1975 Spectra 19
2011 Seadoo GTI130

NEVERDONE

  • Karma: +1/-0
Re: Sub floor vs stringers
« Reply #6 on: May 05, 2017, 09:21:34 AM »
Not going crazy power. Maybe 500 to 600hp. I'm sure full stringer is definitely the strongest. I'm more concerned about it through rough water. I primarily boat between needles and havasu. Lots of big boats and chop.

Sent from my SM-G920T using SoCal Jet Boats mobile app

This is why I like jet boat people......500-600hp is pretty standard, considered nothing crazy.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

rivrrts429

  • Karma: +4/-0
Re: Sub floor vs stringers
« Reply #7 on: May 05, 2017, 02:41:44 PM »
I do want to go aluminum. They don't seem to be in bad shape. I've just never been a fan of fiberglass tanks

Sent from my SM-G920T using SoCal Jet Boats mobile app


If the tanks are good stick to ethanol free and/or AvGas. Ethanol and fiberglass tanks don't mix.

Sweet boat. Looking forward to following along.
  • Boat #1: 21' Bitz Custom
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Jet Boat Maloney

  • Karma: +9/-0
Re: Sub floor vs stringers
« Reply #8 on: May 05, 2017, 09:57:02 PM »
This is why I like jet boat people......500-600hp is pretty standard, considered nothing crazy.

Isn't it standard?
I guess we are a little different ok maybe some of us are a lot different!!


Sent from my iPhone using SoCal Jet Boats mobile app
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

AZ Tom

  • Karma: +1/-0
Re: Sub floor vs stringers
« Reply #9 on: May 09, 2017, 07:49:18 AM »
Nice ride! I have a Spectra 19 with 1/4 stringers and floor.  Never felt unstable so far.  Then again I'm also not doing 80+ mph....YET.  Depends on the application and layup.  I ran 68 on gps in my old hawaiian and there was never and delamination.  I plan on keeping my boat these Spectra 19s handle great in my opinion and I think with full stringers would be a very solid hull at high speed.
Mineaswell do full stringers now while everything is out rather then building it and regretting it later. 

Sent from my SM-N910V using SoCal Jet Boats mobile app

  • Boat #1: 1976 Spectra 19
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

SpectraRyan

  • Karma: +2/-0
Re: Sub floor vs stringers
« Reply #10 on: May 10, 2017, 10:08:51 AM »
This is why I like jet boat people......500-600hp is pretty standard, considered nothing crazy.
I consider it pretty mild. We put a 450 horse crate in our advantage and I think that's nothing co.sidering most new boats are coming with factory packages over 500 horse now a days. It's crazy when we first bought our victory in 97 we thought our 318 horse 454 was a big motor, lol.

Sent from my SM-G920T using SoCal Jet Boats mobile app

  • Boat #1: 1998 Advantage 27 Victory BR
  • Boat #2: 1975 Spectra 19 jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1998 Advantage 27 Victory
1975 Spectra 19
2011 Seadoo GTI130

SpectraRyan

  • Karma: +2/-0
Re: Sub floor vs stringers
« Reply #11 on: May 10, 2017, 10:11:25 AM »

If the tanks are good stick to ethanol free and/or AvGas. Ethanol and fiberglass tanks don't mix.

Sweet boat. Looking forward to following along.
They seem fine outside but idk inside. I really don't want to have to worry about it though. I just want to be able to pull up to any pump cali or az or wherever and fill up and go, so aluminum it is.

Sent from my SM-G920T using SoCal Jet Boats mobile app

  • Boat #1: 1998 Advantage 27 Victory BR
  • Boat #2: 1975 Spectra 19 jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1998 Advantage 27 Victory
1975 Spectra 19
2011 Seadoo GTI130

SpectraRyan

  • Karma: +2/-0
Re: Sub floor vs stringers
« Reply #12 on: May 10, 2017, 10:14:51 AM »
Nice ride! I have a Spectra 19 with 1/4 stringers and floor.  Never felt unstable so far.  Then again I'm also not doing 80+ mph....YET.  Depends on the application and layup.  I ran 68 on gps in my old hawaiian and there was never and delamination.  I plan on keeping my boat these Spectra 19s handle great in my opinion and I think with full stringers would be a very solid hull at high speed.
Mineaswell do full stringers now while everything is out rather then building it and regretting it later. 

Sent from my SM-N910V using SoCal Jet Boats mobile app
Thanks. At this point I'm not shooting for insane speeds. If it will do high 60s or or 70 I'll bee happy. Maybe in the future when funds are a little better I might throw a blower on it which is why I'm building this engine as beefy as I can. I'm definitely going to start doing the inside now though. I started a build thread already on it. Just haven't had much time to work on it. I'll get back on it soon though.

Sent from my SM-G920T using SoCal Jet Boats mobile app

  • Boat #1: 1998 Advantage 27 Victory BR
  • Boat #2: 1975 Spectra 19 jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1998 Advantage 27 Victory
1975 Spectra 19
2011 Seadoo GTI130

buckskin

  • Karma: +0/-0
Re: Sub floor vs stringers
« Reply #13 on: May 10, 2017, 12:01:29 PM »
They seem fine outside but idk inside. I really don't want to have to worry about it though. I just want to be able to pull up to any pump cali or az or wherever and fill up and go, so aluminum it is.

Sent from my SM-G920T using SoCal Jet Boats mobile app
Do you plan to have new tanks built or source some that are close enough?

Sent from my Z981 using SoCal Jet Boats mobile app

  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

SpectraRyan

  • Karma: +2/-0
Re: Sub floor vs stringers
« Reply #14 on: May 10, 2017, 01:11:49 PM »
Do you plan to have new tanks built or source some that are close enough?

Sent from my Z981 using SoCal Jet Boats mobile app
Probably have them built. I want as much capacity as possible and fit the boat right.

Sent from my SM-G920T using SoCal Jet Boats mobile app

  • Boat #1: 1998 Advantage 27 Victory BR
  • Boat #2: 1975 Spectra 19 jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1998 Advantage 27 Victory
1975 Spectra 19
2011 Seadoo GTI130

AZ Tom

  • Karma: +1/-0
Re: Sub floor vs stringers
« Reply #15 on: May 10, 2017, 03:09:18 PM »
Thanks. At this point I'm not shooting for insane speeds. If it will do high 60s or or 70 I'll bee happy. Maybe in the future when funds are a little better I might throw a blower on it which is why I'm building this engine as beefy as I can. I'm definitely going to start doing the inside now though. I started a build thread already on it. Just haven't had much time to work on it. I'll get back on it soon though.

Sent from my SM-G920T using SoCal Jet Boats mobile app
Right on keep us posted

Sent from my SM-N910V using SoCal Jet Boats mobile app

  • Boat #1: 1976 Spectra 19
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

 


Null

SMFPacks CMS 1.0.3 © 2026