Upholstery

« **on:** January 17, 2012, 05:04:00 AM »

Anyone know of a reasonably priced, good upholsterer that is local?

I think I wanna do the same configuration but put white in place of the pink..

Sent from my ADR6400L using Tapatalk

« **Reply #1 on:** January 17, 2012, 05:18:35 AM »

As far as bimini goes, wife wants me to buy a longer one to shade a bit more but I don't want to parachute off the lake when planing out. Am I better off having someone make new fabric for what I've got? Or pick one out of a catalog?

Again, probably same scheme with white replacing pink..

The boat has quite enough pink in it

Sent from my ADR6400L using Tapatalk

« **Reply #2 on:** January 17, 2012, 06:54:15 AM »

custom canvas in montclair
remember good aint cheap and cheap aint good

« **Reply #3 on:** January 17, 2012, 01:06:13 PM »

Martinez Marine Interiors in Corona took care of me and they did a great job.

X2

Quote from: Ralph Brunt on January 17, 2012, 06:54:15 AM

remember good aint cheap and cheap aint good

« **Reply #4 on:** January 17, 2012, 01:10:09 PM »

Custome Canvas in Monclair is aswesome. He aint cheap but he does great work. i got my Bimini there and its solid and it looks really good with my boat

« **Reply #5 on:** January 21, 2012, 03:39:10 PM »

You can't remove the pink... It pulls everything together. And I'd say go to a custom place, my parents have a larger Bimini on there boat that they got custom made.

Sent while on the run, or sitting at work bored

« **Reply #6 on:** January 21, 2012, 06:26:13 PM »

this one was done at custom canvas, it is more than i could ask for and the customer service was awsome.. hell they even called me a week after i picked it up to make sure i was happy with it

http://www.socaljetboats.com/interior/bimini-by-custom-canvas/msg163825/#msg163825

« **Reply #7 on:** January 27, 2012, 09:11:34 PM »

Starting to rock and roll on the carpentry end of things and saving some cost in the things I can do.

Goal is to have all new seat bottoms cut, shaped, sanded and glassed come Monday!

Sent from my ADR6400L using Tapatalk

« **Reply #8 on:** January 29, 2012, 08:46:15 PM »

Took a full sheet of plywood with little scrap.

Traced, cut, shaped, routed, sanded and glassed today.

I floated each piece in a shallow tub with resin. Sanded first coat flat and thin around the edges so that staples will make it through, then thinned down the resin with acetone for the final coat.

My seat bottoms match swimsteps and floor-lockers in color and are finished like the tables at Outback Steakhouse... Just in case someone looks under the seats.

Sent from my ADR6400L using Tapatalk

« **Reply #9 on:** January 30, 2012, 10:51:55 PM »

Ever have the moment of why the fuck did I take it all apart?

Sent from my ADR6400L using Tapatalk

« **Reply #10 on:** January 31, 2012, 12:18:37 AM »

Quote from: BIG JOHNSON on January 30, 2012, 10:51:55 PM

Ever have the moment of why the **** did I take it all apart?

Sent from my ADR6400L using Tapatalk

too often

just stick with it.

« **Reply #11 on:** January 31, 2012, 03:53:07 AM »

Quote from: BIG JOHNSON on January 30, 2012, 10:51:55 PM

Ever have the moment of why the **** did I take it all apart?

Sent from my ADR6400L using Tapatalk

my life story

« **Reply #12 on:** January 31, 2012, 07:20:42 AM »

No regrets, boat is worth putting work into. Wish I woulda started this in November.

Realizing its gonna cost a bit more than new wood and vinyl, speakers are dated, head unit is tired and the equalizer is wierd.

The gauges now look their age, I think they're VDO's nothing fancy. Buddy of mine says Livorsi is the way to go.

Sent from my ADR6400L using Tapatalk

« **Reply #13 on:** February 01, 2012, 02:49:13 PM »

I kinda like this scheme, my interior colors need to calm down.

Sent from my ADR6400L using Tapatalk

« **Reply #14 on:** February 01, 2012, 02:57:10 PM »

thats very similar to my dana just mine is sunburnt

« **Reply #15 on:** February 01, 2012, 07:02:31 PM »

They did an awesome job on it.

Here's my almost getting clean slate. No beer tonight, all business.

Sent from my ADR6400L using Tapatalk

« **Reply #16 on:** February 01, 2012, 09:27:05 PM »

Quote from: BIG JOHNSON on January 30, 2012, 10:51:55 PM

Ever have the moment of why the **** did I take it all apart?

Sent from my ADR6400L using Tapatalk

Wait till you start trying to re-rig stuff.
Good Times.

Is there anything wrong with the upholstery itself? Or just to calm it down? From the pics it doesn't look in too bad of shape.

« **Reply #17 on:** February 01, 2012, 10:58:58 PM »

Quote from: TrollerDave on February 01, 2012, 09:27:05 PM

Wait till you start trying to re-rig stuff.
Good Times.

Is there anything wrong with the upholstery itself? Or just to calm it down? From the pics it doesn't look in too bad of shape.

Seat cushions coming apart at the seams and plywood bottoms weren't the best.

Sent from my ADR6400L using Tapatalk

« **Reply #18 on:** February 02, 2012, 12:19:02 PM »

I use Garzas Upholstery in El Monte. Cars and boats.

« **Reply #19 on:** February 03, 2012, 12:11:50 AM »

Dropped off parts to be covered this evening. Dude is one month out on lead. Glad I didn't wait any longer..

Swear to shit, I'd rather build a motor than re-upholster a boat. A simple recover of seats has turned into interior restoration. Anyway, now is the time I keep saying. Putting in the hours your standard upholstery guy would not.

Good thing I cut back on beer, resin fumes doing juuuust fine.

Sent from my ADR6400L using Tapatalk

« **Reply #20 on:** February 03, 2012, 07:26:29 AM »

so whos doing it and how much?

« **Reply #21 on:** February 03, 2012, 07:45:06 AM »

Quote from: 82daytona on February 03, 2012, 07:26:29 AM

so whos doing it and how much?

Henry's Upholstery in La Habra and for 1800 and price will probably go up from there.

He's done a lot of work for several customers I've done windows for, The Forty Ford/Forties Limited car club.

Sent from my ADR6400L using Tapatalk

« **Reply #22 on:** February 03, 2012, 02:00:09 PM »

can't wait to see it I'm looking to redo mine but will probably hold off till nect year

« **Reply #23 on:** February 03, 2012, 02:43:09 PM »

Is 1800 for an new wood, foam, and vinyl? If so not a bad price. I have been quoted 2500-3000 for the same work.

« **Reply #24 on:** February 03, 2012, 03:35:09 PM »

Quote from: Rogers Hopeful on February 03, 2012, 02:43:09 PM

Is 1800 for an new wood, foam, and vinyl? If so not a bad price. I have been quoted 2500-3000 for the same work.

I'm the carpenter and resin guy on this one though. 1800 was only for new Softside marine vinyl and foam on seat bottoms.

I'm sure price will go up because I talked myself into all new foam since I wanna go the distance and have no regrets.

Sent from my ADR6400L using Tapatalk

BIG JOHNSON

BIG JOHNSON

Ralph Brunt

HaulsBalls

1972Challenger

More2LifeThanMPG

Ralph Brunt

BIG JOHNSON

BIG JOHNSON

BIG JOHNSON

Brad @ SCJB

82daytona

BIG JOHNSON

BIG JOHNSON

82daytona

BIG JOHNSON

TrollerDave

BIG JOHNSON

gregb

BIG JOHNSON

82daytona

BIG JOHNSON

82daytona

Rogers Hopeful

BIG JOHNSON