Upholstery

« **Reply #25 on:** February 03, 2012, 06:09:07 PM »

Call me nuts but I'm thinking I'm going to glass in some 3/4" ply up under the consoles, out of the way for my sub enclosures. I hate the ghetto truck boxes stashed in the boat.

Probably not that big a deal, start out with some cardboard and keep cutting till I like my template and guess of the damned at one cubic foot then cut and shape some thick plywood and throw the mat and resin at it. Sound good?

Sent from my ADR6400L using Tapatalk

« **Reply #26 on:** February 03, 2012, 06:23:49 PM »

do it!

« **Reply #27 on:** February 04, 2012, 05:35:36 PM »

Quote from: 82daytona on February 03, 2012, 06:23:49 PM

do it!

Okay, fine, I'll do it.

Sent from my ADR6400L using Tapatalk

« **Reply #28 on:** February 04, 2012, 11:41:53 PM »

Quote from: Rogers Hopeful on February 03, 2012, 02:43:09 PM

Is 1800 for an new wood, foam, and vinyl? If so not a bad price. I have been quoted 2500-3000 for the same work.

you build the wood ...and pay 4.....you seal..and pay 4...and then you go pay 1800 to get them upholstered.......

« **Reply #29 on:** February 05, 2012, 07:04:35 AM »

Quote from: jetjunky101 on February 04, 2012, 11:41:53 PM

you build the wood ...and pay 4.....you seal..and pay 4...and then you go pay 1800 to get them upholstered.......

My boat has a lot of upholstery.

Sent from my ADR6400L using Tapatalk

« **Reply #30 on:** February 05, 2012, 07:40:05 AM »

the least I've been quoted was 3000 with no foam or carpet

« **Reply #31 on:** February 05, 2012, 08:17:53 AM »

I built my own seat frames and mine was over $5000. 00 for seats and carpet.Remember good ain't cheap and cheap ain't good

« **Reply #32 on:** February 05, 2012, 09:23:22 AM »

Just cause ya pay more doesn't mean you get the best.

1800 was a starting point and there's been changes and will be more changes. I'll probably be in the mid/upper 2k range with the guy.

Sent from my ADR6400L using Tapatalk

« **Reply #33 on:** February 05, 2012, 12:58:59 PM »

I suck at fiberglass, thank god it gets carpet.

Sent from my ADR6400L using Tapatalk

« **Reply #34 on:** February 05, 2012, 08:16:55 PM »

Glassed out beyatch

Sent from my ADR6400L using Tapatalk

« **Reply #35 on:** February 10, 2012, 06:22:01 PM »

Quote from: filterbiz on February 10, 2012, 11:23:19 AM

looks sweet!
I like the advertising in the back ground!

chris

I just stole the banner from work. I have a 400w Metal Halide work light on the side of the garage and the banner keeps it from lighting up the two neighbors across the street.

Sent from my ADR6400L using Tapatalk

« **Reply #36 on:** February 12, 2012, 09:54:30 AM »

Yeah I couldn't get away from it, it is being incorporated. Without it, it won't match the gel and would look dumb.

Sent from my ADR6400L using Tapatalk

« **Reply #37 on:** February 14, 2012, 03:14:45 PM »

Since I'm doing this..

Sent from my ADR6400L using Tapatalk

« **Reply #38 on:** February 14, 2012, 03:39:01 PM »

must be nice

« **Reply #39 on:** February 14, 2012, 07:36:00 PM »

Nice get up... Not too over the top and will sound super clean!

Sent while on the run, or sitting at work bored

« **Reply #40 on:** February 15, 2012, 07:59:53 PM »

Got 6 pieces back today!

The guy gave me back my engine hatch and I'm going to rebuild, glass and give it back.

Sent from my ADR6400L using Tapatalk

« **Reply #41 on:** February 16, 2012, 01:15:32 PM »

Gonna ditch the teak ski locker and floor ice chest and make some carpeted and glassed drop in lids.

Sent from my ADR6400L using Tapatalk

« **Reply #42 on:** February 17, 2012, 02:07:04 PM »

This is what shall hold thy carpeted drop in floor locker lids.

And it was good.

Sent from my ADR6400L using Tapatalk

« **Reply #43 on:** February 17, 2012, 03:35:20 PM »

Quote from: ka0tyk on February 17, 2012, 02:52:58 PM

toss some silicone on the bolts/washers before you put em in so you keep that floor waterproof now that you've drilled holes in it.

Gotcha.

I dabbed some resin around each and seated all the carriage bolts with temporary nuts. Come time to do carpet I can take them loose, pinch the carpet between aluminum and put on the stainless lock nuts without any carriage bolts spinning on me.

Sent from my ADR6400L using Tapatalk

« **Reply #44 on:** February 17, 2012, 04:22:14 PM »

Quote from: BIG JOHNSON on February 17, 2012, 02:07:04 PM

This is what shall hold thy carpeted drop in floor locker lids.

And it was good.

Since
Sent from my ADR6400L using Tapatalk

I just got that impatct drill too that thing is the SHIT

« **Reply #45 on:** February 17, 2012, 06:54:58 PM »

Embroidered $9 per logo, not bad.

Sent from my ADR6400L using Tapatalk

« **Reply #46 on:** February 17, 2012, 07:30:21 PM »

Quote from: 82daytona on February 17, 2012, 04:22:14 PM

I just got that impatct drill too that thing is the SHIT

This is the newest, I go through a drill and impact every year. I wanted the 20v max but I have too many 18v tools and the batteries aren't interchangeable. I prob have 15 batteries from NiCad to compact lithium and by far the XRP lithium is awesome.

Sent from my ADR6400L using Tapatalk

« **Reply #47 on:** February 18, 2012, 07:17:08 AM »

I got the 20v those things are torque monsters

« **Reply #48 on:** February 19, 2012, 01:14:53 AM »

After late/pre resin creativity.

Sent from my ADR6400L using Tapatalk

« **Reply #49 on:** February 19, 2012, 07:49:30 PM »

I'm gonna call these floor lockers clean.

Sent from my ADR6400L using Tapatalk

BIG JOHNSON

82daytona

BIG JOHNSON

jetjunky101

BIG JOHNSON

82daytona

farmergord

BIG JOHNSON

BIG JOHNSON

BIG JOHNSON

BIG JOHNSON

BIG JOHNSON

BIG JOHNSON

82daytona

More2LifeThanMPG

BIG JOHNSON

BIG JOHNSON

BIG JOHNSON

BIG JOHNSON

82daytona

BIG JOHNSON

BIG JOHNSON

82daytona

BIG JOHNSON

BIG JOHNSON