SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Katchley on July 22, 2018, 11:03:50 AM
-
So I got my cable installed but am wondering the seal at the transom..... is the cable saapose to move in n out when you turn the wheel?.... and if so what’s the proper way to seal it?
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Ya you need a second cable bellow/rubber boot to seal it $13 on cpperformance
-
Ya you need a second cable bellow/rubber boot to seal it $13 on cpperformance
It’s there. I just finished resealing it.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
I had the same deal with my JF pump. Cable slid out too far and tore up the new boot. I know there’s supposed to be a white nylon ring around the cable Inside that disc but the cable does still slide. Just have to clamp the boot where it can move lock to lock freely. The boot is the main seal. And the nylon ring is the backup but will leak a bit if the boot is torn. On mine anyway. Haha. Hope that helps.

Sent from my iPhone using SoCal Jet Boats
-
I had the same deal with my JF pump. Cable slid out too far and tore up the new boot. I know there’s supposed to be a white nylon ring around the cable Inside that disc but the cable does still slide. Just have to clamp the boot where it can move lock to lock freely. The boot is the main seal. And the nylon ring is the backup but will leak a bit if the boot is torn. On mine anyway. Haha. Hope that helps. 
Sent from my iPhone using SoCal Jet Boats
Right on, well I think I got it squared away will see when I get it to the water.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)