I have to break in my cam and nearest water is 45 mins away. In order to remove pro engine comes out (not in the mood). Can I run it with water from two hoses and not have to install another wear ring or should I bite the bullet and head to pleasant and just put it in the water?


Sent from my iPhone using SoCal Jet Boats mobile app

Thats exactly how I found out about the plastic wear ring in a WJ.
I broke in the cam on the trailer. A definite No No.

I have been on the river to break in a cam. 25 mins at 2000-2500 rpm up river was less than a quarter mile.

I static set the timing (10* before) and carb was untouched from before eng. rebuild, and got 'er wet.

Or pull it and drop the driveline.

Good luck.

Dan'l

Thats exactly how I found out about the plastic wear ring in a WJ.
I broke in the cam on the trailer. A definite No No.

I have been on the river to break in a cam. 25 mins at 2000-2500 rpm up river was less than a quarter mile.

I static set the timing (10* before) and carb was untouched from before eng. rebuild, and got 'er wet.

Or pull it and drop the driveline.

Good luck.

Dan'l

Way to ruin my day LMFAO!!  Guess I'm off to lake pleasant because I can't enjoy my boat until I break in this darn cam!


Sent from my iPhone using SoCal Jet Boats mobile app