SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: propless on January 27, 2010, 07:53:52 PM

Title: name that droop.
Post by: propless on January 27, 2010, 07:53:52 PM: Can anyone tell what kind of droop this is ?? Theres no name/part numbers on it, the only marking I can find is that small line by the flange. It has a horizontal divider in it. Its on a Jacuzzi WJ pump, but I dont think it was made for a Jacuzzi because of the flange, looks like a Berk style droop. ???

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi239.photobucket.com%2Falbums%2Fff97%2Fpropless%2FBrendella%2FPICT0021-1.jpg&hash=7d5da7786bcf5be23742711e1701a3d3512ccc88)
Title: Re: name that droop.
Post by: Luckie Stiff on January 27, 2010, 08:00:00 PM: I'm gonna guess Aggressor. That looks like the one I have, and mine is an aggressor.
Title: Re: name that droop.
Post by: propless on January 27, 2010, 08:06:54 PM: Quote from: Luckie Stiff on January 27, 2010, 08:00:00 PM
I'm gonna guess Aggressor. That looks like the one I have, and mine is an aggressor.

I thought I saw somewhere that Aggressors had a vertical divider ?? Its hard to remember this stuff sometimes.
Title: Re: name that droop.
Post by: Oldsquirt on January 27, 2010, 08:33:33 PM: American Turbine. I have one and it has that same little casting line at the 9 o'clock position.
Title: Re: name that droop.
Post by: Luckie Stiff on January 27, 2010, 08:36:28 PM: Quote from: propless on January 27, 2010, 08:06:54 PM
I thought I saw somewhere that Aggressors had a vertical divider ?? Its hard to remember this stuff sometimes.

You're right proppy, mine has had the divider milled out so I hadda go look and make sure.
Title: Re: name that droop.
Post by: propless on January 27, 2010, 08:50:23 PM: Thanks guys, I was knew that little casting line would help ID it.

American Turbine, thats cool, I didnt have one of those. ;D
Title: Re: name that droop.
Post by: jet boat performance on January 28, 2010, 08:37:04 AM: Jeff judging by the Dominator steering and reverse set up likley as not that the ID at the mouth of the droop (OD of the steering where the teflon seal is) may be larger by nearly 1/8 inch ,meaning its Dominator specific ,when a Berk/AT/Agg nozzle or late Place diverter is used they may fit very loosley and leak .There are a few simple fixes for this however Tom

BTW Some very early Place units were made for the larger outlet style droop and Nozzle hsg style and conversley wont fit into Berk openings
Title: Re: name that droop.
Post by: propless on January 29, 2010, 12:53:06 AM: Thanks Tom, I'll check that out when I get around to pulling it apart. Wasn't sure what that nozzle was from, its a real Frankenstein pump.
Title: Re: name that droop.
Post by: jet boat performance on January 31, 2010, 12:14:56 PM: Quote from: propless on January 29, 2010, 12:53:06 AM
Thanks Tom, I'll check that out when I get around to pulling it apart. Wasn't sure what that nozzle was from, its a real Frankenstein pump.
That Droop BTW (if it is the one I think) , is worth its weight in gold to a person who finds them selves with an early Dominator Place unit Tom