Can anyone tell what kind of droop this is ??  Theres no name/part numbers on it, the only marking I can find is that small line by the flange.  It has a horizontal divider in it. Its on a Jacuzzi WJ pump, but I dont think it was made for a Jacuzzi because of the flange, looks like a Berk style droop. 

I'm gonna guess Aggressor. That looks like the one I have, and mine is an aggressor.

 I thought I saw somewhere that Aggressors had a vertical divider ??  Its hard to remember this stuff sometimes.

I thought I saw somewhere that Aggressors had a vertical divider ??  Its hard to remember this stuff sometimes.

You're right proppy, mine has had the divider milled out so I hadda go look and make sure.

Jeff judging by the Dominator steering and reverse set up likley as not that the ID at the mouth of the droop (OD of the steering where the teflon seal is) may be  larger by nearly 1/8 inch ,meaning its Dominator specific ,when a Berk/AT/Agg nozzle or late Place diverter is used they may fit very loosley and leak .There are a few simple fixes for this however Tom


BTW Some very early Place units were made for the larger outlet style droop and Nozzle hsg style and conversley wont fit into Berk openings

Thanks Tom, I'll check that out when I get around to pulling it apart.  Wasn't sure what that nozzle was from, its a real Frankenstein pump.

That Droop BTW (if it is the one I think) , is worth its weight in gold to a person who finds them selves with an early Dominator Place unit Tom