Do you sell the parts or do I need to order them from Berkeley

Do you sell the parts or do I need to order them from Berkeley

I am not a dealer,  I was however a boat shop owner for some time.

Your best bet would be to contact Berkeley or any of the dealers that sell Berkeley type parts and go from there. Where did you get the impeller?  Is it "new" or "different"?

GT

Sent from my SCH-I545 using SoCal Jet Boats mobile app

You need to measure the wear ring surface of your "new" impeller.

For what its worth, i just bought a standard stainless wear ring, insulator, and bowl gasket from CP Performance for 149 shipped 2 day air.

Really not that expensive, they do carry the undersize wear rings as well. You just need to measure yours first.

IF you dont have calipers, Harbor freight sells a pretty darn cheap pair http://www.harborfreight.com/8-inch-digital-caliper-47260.html that are semi accurate. They are what i use, and are dead on most of the time

Just to be sure, i measure 3 times, and then average the results out. To be honest though, if they ever vary its by about .001 i dont think that would matter

Thank you all for all the information it has been very helpful