Null


GlassCutter

  • Karma: +31/-0
Scott jet pumps
« on: September 21, 2007, 10:48:36 PM »
Anybody know anything about these pumps. Ugly and big but I'm digging the reverse manueverability. Check out the vid in the beginning and then jump to 4:26.   
  • Boat #1: 1973  Wriedt Montara 23
  • Boat #2: 1978 Spectra 20 460/Berkley
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Also, I will kiss bare male ass in the middle of the Vegas Strip  . . .  I will post pics if I need to.  --  IRRebel 2013

"Go ahead Rivertard does it.  Take a video though."

"If you did it in a dodge it would have shifted perfectly ran a thousand miles per hour and got optimum fuel mileage!"  Nordie  2012

Brad @ SCJB

  • Karma: +255/-0
Re: Scott jet pumps
« Reply #1 on: September 21, 2007, 11:48:07 PM »
i've always wanted to see one of those up close...thanks for the link....

from what i have read....sprint boats tend to run those pumps
  • Boat #1: 1978 Liberty
  • Boat #2: 1982 Eliminator Sprint
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

GlassCutter

  • Karma: +31/-0
Re: Scott jet pumps
« Reply #2 on: September 22, 2007, 07:51:28 AM »
I thought I remembered several years ago reading about Mercury or Mercruiser making a pump with  a similarly shaped reverse mechanism. I think it was in Popular Science or something and they were really high on it. After last weekend when the wind was blowing crossways to my trailer and I was looking like a big azzzz I would really like to try something like this.
  • Boat #1: 1973  Wriedt Montara 23
  • Boat #2: 1978 Spectra 20 460/Berkley
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Also, I will kiss bare male ass in the middle of the Vegas Strip  . . .  I will post pics if I need to.  --  IRRebel 2013

"Go ahead Rivertard does it.  Take a video though."

"If you did it in a dodge it would have shifted perfectly ran a thousand miles per hour and got optimum fuel mileage!"  Nordie  2012

Brad @ SCJB

  • Karma: +255/-0
Re: Scott jet pumps
« Reply #3 on: September 22, 2007, 08:00:59 AM »
I bet you would find that merc pump on bayliners or seadoo boats most likely
  • Boat #1: 1978 Liberty
  • Boat #2: 1982 Eliminator Sprint
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

HDriderTH

  • Karma: +12/-0
Re: Scott jet pumps
« Reply #4 on: September 22, 2007, 08:45:12 AM »
I thought I remembered several years ago reading about Mercury or Mercruiser making a pump with  a similarly shaped reverse mechanism. I think it was in Popular Science or something and they were really high on it. After last weekend when the wind was blowing crossways to my trailer and I was looking like a big azzzz I would really like to try something like this.

  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

'82 Sanger Bubble deck, Blown 454....V-drive

Marcsrollin

  • Karma: +33/-0
Re: Scott jet pumps
« Reply #5 on: September 22, 2007, 10:02:37 AM »
Berkely makes a similar reverse nozel.
  • Boat #1: 1978 TX-19 Youngblood
  • Boat #2: 1994 24 foot Sundancer Pontoon
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Taco'd "a person or people that show up with one lake lice and a family of 50 and cram 3 people at a time on it with no disregard to boating rules or ethics. Usualy crap in toilets and throw shit paper in trash cans. Hang out at the boat ramp like its a swimming hole. Have zero insurance on anything they own and dont give two shits less about your property."

bottom feeder

  • Karma: +1/-0
Re: Scott jet pumps
« Reply #6 on: October 28, 2007, 10:49:25 PM »
Yes I have two what would you like to know? They are Axil flow move huge volumes of water at low pressure. Will out run any pressure pump to the eightys then runs out of legs ;D Price here in the states is a bit steep you will find. Only one importer here in the states
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

GlassCutter

  • Karma: +31/-0
Re: Scott jet pumps
« Reply #7 on: October 29, 2007, 12:04:00 AM »
I'd still like to have more info.  Interesting that this is the topic that brings you on board. Welcome BottomFeeder.
  • Boat #1: 1973  Wriedt Montara 23
  • Boat #2: 1978 Spectra 20 460/Berkley
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Also, I will kiss bare male ass in the middle of the Vegas Strip  . . .  I will post pics if I need to.  --  IRRebel 2013

"Go ahead Rivertard does it.  Take a video though."

"If you did it in a dodge it would have shifted perfectly ran a thousand miles per hour and got optimum fuel mileage!"  Nordie  2012

bottom feeder

  • Karma: +1/-0
Re: Scott jet pumps
« Reply #8 on: October 29, 2007, 07:09:26 PM »
Glass Cutter,
Been here a while Just dont come out from under my rock to often. What kind of info are you looking for? The Scott is much like a Hamilton just major advancements in all aspects. Scott makes parts for some of the hamiltons but the true Scott will not interchage. The pumps I have are 3 stage 8 1/2 inch units. The recovery time from massive cavitation is instant. Slight cavitation is almost unoticed due to the axil flows ability to digest air. With our mixed flow or presure (if you prefer) pumps you can only select from the basicly two pitches in the impeller. I do not know if the Agressor is a diferant pitch but understand that Dave has worked on several. Dave at AMT released a high helix this year. With the scott you can have any pitch. I run three diferant pitches one in each section. The idea is to acelerate the water a little bit in each section. In our pressure pump it cannot be done as this creates cavition from one section to the next. The are used in most jet sprints and many river boats like the vid shows. Buy the way the builder of that boat (RMR) is one of the most knowlegable cutting edge jet boat people in the country both race and play. They have proven to be a best choice for the hard core white water recreational boater. Due to the fact that they still provide thrust in the foam and will process a lot of rock.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

countryboyaustin

  • Karma: +1/-0
Re: Scott jet pumps
« Reply #9 on: November 12, 2007, 02:21:17 PM »
the mercury jet does have a reverse like that. i had one on a sugarsand boatthat i used to own. What I liked about that reverse was that at full  tilt you could put itin reverse and the boat woudl dead stop in the water! Great brake for emergencies and for fun on occasion! It was awesome!
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Daycruiser

UNDONE

Re: Scott jet pumps
« Reply #10 on: November 13, 2007, 04:58:13 PM »
Aggressor has a couple things up their sleeve that everyone will be excited about by the beginning of next season...... Just keep an eye out.

That Scott is pretty cool looking, and can attest to bottom feeders claims about the axial. The axial is a great pump if you're chewing up rocks and such, seen one munch up 12 feet of tow rope and still keep going with the rope in it. Not recommended...
« Last Edit: November 13, 2007, 05:01:58 PM by UNDONE »
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

 


Null

SMFPacks CMS 1.0.3 © 2026