SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: 2savage4you on November 26, 2007, 01:54:23 PM
-
never mind i just had to look and it found itself, CP Performance Duh :o
Thanks
2sav
-
Here yah go
http://www.hotboat.com/forums/showthread.php?t=161228&highlight=busby+intake
-
Here yah go
http://www.hotboat.com/forums/showthread.php?t=161228&highlight=busby+intake
Nice intake thread but it dont help me, i already have one in the boat ;)
I need to rebuild the suction housing
2sav
-
A suction housing rebuild is basically a full pump rebuild. Most of the parts are in the suction housing yes, but it's a full pump rebuild kit that you need.
You'll also wanna change the shaft bushings in the bowl as well.
-
A suction housing rebuild is basically a full pump rebuild. Most of the parts are in the suction housing yes, but it's a full pump rebuild kit that you need.
You'll also wanna change the shaft bushings in the bowl as well.
I dont have a complete pump, only a suction housing. Soooo....... why buy a complete kit when i have to buy a new bowl anyways. It should come ready unless i replace my missing bowl with a used one :o
2sav
-
I dont have a complete pump, only a suction housing. Soooo....... why buy a complete kit when i have to buy a new bowl anyways. It should come ready unless i replace my missing bowl with a used one :o
2sav
you need to quit bitching about this bowl and do something about it. if i was in your shoes, i sure would.
the complete kit is what you will need if you have a bowl or not...used or new....you will need the gaskets n shit. i will tell you this...if you try to 'piece together' a list of stuff just for the suction housing....it will cost more then a whole kit.....so get the complete rebuild kit minus the impeller...because you are going to use that perfectly normal stainless one, right? ;)
-
2sav Brads right your not going to save anything by buying the partials we (industry ) price and arrange these kits intebtionally to be a better buy in kit form with or without impeller You should be around 225 for a very complete kit w/o impeller and a couple "hun" more with Tom
-
What happened to the bowl? Did you smoke it or something? ;D ;D
-
What happened to the bowl? Did you smoke it or something? ;D ;D
No but as of now, I consider it to be stolen.
2sav
-
Someone stole your bowl?? That is fu*ked up! I would woop someones ass if I found out who it was!
-
Someone stole your bowl?? That is fu*ked up! I would woop someones ass if I found out who it was!
I know who it was, it was supposed to be replaced and has not been so i consider it stolen
2sav
-
what a coward.
-
Hey 2sav!!!
I think someone owes you a boat in place of the bowl, right? >:D
-
Hey 2sav!!!
I think someone owes you a boat in place of the bowl, right? >:D
If you looked in my yard, you would just want the bowl back ;) I got enough boats that dont run ;D
2sav
-
I'm sure you do have plenty of boats but it's just the principle of the whole thing. If you wanna do it let me know I could back you up!!!
-
Hey 2sav!!!
I think someone owes you a boat in place of the bowl, right? >:D
Actually it would be a Trailer only.
If you looked in my yard, you would just want the bowl back ;) I got enough boats that dont run ;D
2sav
Steve I am sorry you are so impatient and want everything right now, being I just got the bowl, the one to be converted, from you after the 300. And with the deal that we had, I was under the impression that we were cool till after this last race when I could start working on it. I thought the childish bull was squashed ? I know how you are and understand that you want and are entitled to a bowl, Custom Split Bowl (converted C bowl), These things take a bit of time to make and per our agreement you are paying for the welding. I know it is not in your hands yet, it will be in the near future. If I remember right I'm the guy, (who is now being accused of stealing from you) gave you a resealable droop and quite a few other parts. I guess that does not count for anything. I am sorry you feel as if I screwed you in any way.
I'm sure you do have plenty of boats but it's just the principle of the whole thing. If you wanna do it let me know I could back you up!!!
Your best bet is to back the fuck off, if he has a problem he could maybe pick up the muther fuckin phone and say something or even send a message via pm or email. As this is the pm I recieved before the race at Parker last weekend, when I offered him to check out the 429 engine build, which had nothing mentioned about a bowl.
Thanks but im kinda stuck at home. Glad to hear your back in it again :D
Good luck in Parker, and try not to grenade another engine. lol :lol:
Steve
-
Your telling me to back off!!?? Yeah whatever. You could always just go tongue fuck my fart box!!
-
# 1 did you pay me when you took my bowl? No you did not so why do i have to pay to get it back (welding) And i told you i dont want no throw together bowl POS. And the impatient part how many months does it take ????? the agreement was you were going to get the bowl from Havasu.
#2 the droop, that was a Used worn out POS! Even the guy you got it from said so. He told me it should have been cut up and thrown in the trash! Thats why he took it off his boat
#3 reasonable parts that you put in my truck ended up at the recyclers cause it was broken junk!
#4 Screwed me in any way, Um gee let me think $400 for a POS 460 that you said you know nothing about but it turns out the guy that GAVE it to you told you everything about it and you had no problem lying to me about it. So who's really being childish here ?
And why would i want to pick up a phone, so you can screw me again?
Yes i sent that pm to you,
It was me being the bigger man and not calling it like i should have Bullshit!
So far its been Took my bowl tried to take my SS impeller and sold me a BBF POS.
You sucker me in and say i will help you but actually i should have broken the code cause trust me means i will fuck you. Right?
2sav
-
If you feel that strongly about that bowl, you will have it next week from Havasu.
-
# 1 did you pay me when you took my bowl? No you did not so why do i have to pay to get it back (welding) And i told you i dont want no throw together bowl POS. And the impatient part how many months does it take ????? the agreement was you were going to get the bowl from Havasu.
#2 the droop, that was a Used worn out POS! Even the guy you got it from said so. He told me it should have been cut up and thrown in the trash! Thats why he took it off his boat
#3 reasonable parts that you put in my truck ended up at the recyclers cause it was broken junk!
#4 Screwed me in any way, Um gee let me think $400 for a POS 460 that you said you know nothing about but it turns out the guy that GAVE it to you told you everything about it and you had no problem lying to me about it. So who's really being childish here ?
And why would i want to pick up a phone, so you can screw me again?
Yes i sent that pm to you,
It was me being the bigger man and not calling it like i should have Bullshit!
So far its been Took my bowl tried to take my SS impeller and sold me a BBF POS.
You sucker me in and say i will help you but actually i should have broken the code cause trust me means i will **** you. Right?
2sav
:o
-
#4 Screwed me in any way, Um gee let me think $400 for a POS 460 that you said you know nothing about but it turns out the guy that GAVE it to you told you everything about it and you had no problem lying to me about it. So who's really being childish here ?
I will give you your $400 back for a complete 460 air cleaner to pan as it was delivered. I could use the block, crank and rods.
-
I will give you your $400 back for a complete 460 air cleaner to pan as it was delivered. I could use the block, crank and rods.
To bad i stripped it and threw all that shit away ;)
2sav
-
To bad i stripped it and threw all that shit away ;)
2sav
What do you have left ?
-
What do you have left ?
Block, crank, rods, pistons, oil pan/pump, harmonic with pulley, Fuel pump, carburetor off the top of my head ???
2sav
-
Block, crank, rods, pistons, oil pan/pump, harmonic with pulley, Fuel pump, carburetor off the top of my head ???
2sav
I will give you $250 for all that.
-
I will give you $250 for all that.
Show me the $$$$ ;D like i did you. ;)
2sav
-
Block, crank, rods, pistons, oil pan/pump, harmonic with pulley, Fuel pump, carburetor off the top of my head ???
2sav
Show me the $$$$ ;D like i did you. ;)
2sav
So is it a deal ?
-
So is it a deal ?
You bring me $250 cash its your's, what i posted i had left
that is
2sav
-
You bring me $250 cash its your's, what i posted i had left
that is
2sav
...whats that saying...?
-
...whats that saying...?
It means. I want money Duckets,dollars,greenbacks,not wetbacks ;D CHEDDA, No credit, no bill me later,
Cash on the barrel head. Get it Got it Good ;)
As the river flows, Soooo........ does the days of our lives.
2sav
-
no....not what i had in mind, but that works as well...
money talks, bullshit walks.
-
no....not what i had in mind, but that works as well...
money talks, bullshit walks.
Yeah i know what you meant ;D i was just playin around. But those are famous words. If i remember right thats what he told me when i bought this motor ;)
I guess what go's around comes around, time to step up :o
2sav
-
2 SAV- if you sell Jim your block, whaddya gonna use for your boat? Bet you're missing that Olds about now eh?
-
2 SAV- if you sell Jim your block, whaddya gonna use for your boat? Bet you're missing that Olds about now eh?
Missing the Olds ??? Yes cause it would have been easier and less stressfull. But i really wanted a BBF for the Fantasy ;)
Cause if and when we ever get together you guys aint leaving me behind, Ill race ur ass >:D
Besides i seriously doubt Jim buys it back. ;)
2sav
-
So is it a deal ?
Yeah so is it????
Three days and nothing said to confirm it ???
2sav
-
???
2sav
-
???
2sav
it aint tuesday yet.....he'd gladly pay ya tuesday for a 460 block today...
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.zeronfinefoods.com%2Fwimpy.gif&hash=d6d2f896af5e05bf8dda629b6feb17d332985d88)
-
it aint tuesday yet.....he'd gladly pay ya tuesday for a 460 block today...
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.zeronfinefoods.com%2Fwimpy.gif&hash=d6d2f896af5e05bf8dda629b6feb17d332985d88)
We will see :o
2sav
-
Ok its tuesday ;D
2sav >:D
-
I will give you $250 for all that.
Well still waiting. its tuesday ;)
Maybe you meant next month on tuesday, Right?
If you aint gonna do it just say so!
2sav
-
Maybe he meant the 2nd Tuesday of next week O0 O0 O0
-
hey stiff, you and marc remembers that E (jim) was the one that tried to back door me on the Hawaiian that you own now, oh how is it coming along, he was going to do my rebuild on the berkeley pump in the other two boats but had bad feeling in a phone conv. prior to shipping back to him, boy i guess i am a lucky stiff also
-
Well Tuesday has come and gone and i already knew he would not step up! Funny thing is i really wanted to post that he did, o'well. Soooo....... before this turns into a "Bash on Jim thread" i think it should be let go cause i dont see anything good coming out of this anyways. Time to move on ;D
2sav