Newbie to the site so I'll try and give all the info must newbies forget. I'm running a 21ft open bow Commander with a 454BBC punched out to 468. Full roller motor with 871 blower shop blower and dual 750 holley double pumpers. My pump is an American Turbine 12TD, "A" cut. Hydraulic place diverter and 14" ride plate.
Now for the question. I recently ran through some weeds that plugged my intake and before I realized it my wear ring heated up and came loose. I'm pretty mechanical but after reading some of the posts on rebuilding a jet I think I would be safer having a pro do it. Anybody have any recommendations for a shop in OC that does a good job and can also check my set up to make recommendations for improvements?

^^+1 for Jack, look no further, his shop is just down at the end of hte 55 fwy in Costa Mesa.

Jack is my #1 also but we have two other shops if Jack is too busy or to $ for you. GS Marine, Greg Shoemaker 951-272-6060, Corona., and R&D Marine Harold Bruce 714-993-2664, Anaheim