small drywall work needed

« **on:** April 30, 2009, 04:39:07 PM »

I have the drywall and tape but need a drywaller to finish the work, Here are some pics. If your a drywaller please respond with a price. I can do the painting. Thanks.

Marty

martyjm@pacbell.net

« **Reply #1 on:** April 30, 2009, 05:12:48 PM »

get ahold of Omar(Beerjet) he will do almost anything for money

« **Reply #2 on:** April 30, 2009, 05:26:11 PM »

I'll do almost anything for money also but does he know how to do drywall... Also I forgot to tell you I'm located in Burbank.

« **Reply #3 on:** April 30, 2009, 07:07:06 PM »

Quote from: marty722 on April 30, 2009, 05:26:11 PM

I'll do almost anything for money also but does he know how to do drywall... Also I forgot to tell you I'm located in Burbank.

Sorry, dont do drywall.

I thought Bob was a drywaller,

since he's always covered in white goopy stuff.....
ohhhh wait ....... $:-\$
ewwwwwww Bob..........

-beerjet-

« **Reply #4 on:** April 30, 2009, 07:12:04 PM »

That's a piece of cake...If Omar needs help...I will be their

« **Reply #5 on:** April 30, 2009, 07:17:26 PM »

Just cut the dry waLL TO SIZE WITH A EXATO KNIFE , GROOVE YOUR TAPE AREA, USE DRYWALL SCREWS AND
SCREW IN PLACE, THENESE FIBERGLASS TAPE AND MUD TO BLEND...THEN USE QUICK DRY MUD, FINISH SAND.
PRIME PAINT...U ARE DONE..IT IS VERY EASY

« **Reply #6 on:** April 30, 2009, 07:21:50 PM »

oR CONTACT dan dan the drywall man/ aka top gun...located in whittier ca. 90604. I can get u his #.

« **Reply #7 on:** April 30, 2009, 08:20:33 PM »

thanks for all the info...I may give it a shot, what the hell how bad can I screw it up

« **Reply #8 on:** April 30, 2009, 08:42:55 PM »

You can't...it is only cosmetic.....doesn't have compression, oil leaks , water leaks etc.

just remember, cut drywall w/exato knife on both sides, then just snap off....no brainer

« **Reply #9 on:** April 30, 2009, 08:53:07 PM »

You're not trying to launch a missile here. Go to Home Depot and grab a couple free paint sticks, a 2x2 piece of sheetrock, some drywall tape, 1" drywall screws and joint compound.

Cut the hole square, then put a couple of paint sticks in the hole and pull them so they are up against the back of the drywall. Run a screw in each side holding the sticks to the drywall. then cut a piece of the 2x2 drywall to fit the hole and screw it to the paint sticks. chamfer the edges, put on some joint compound then the tape, then joint compound when its dry and sand like hell. Nothing to it.

Ray

« **Reply #10 on:** May 01, 2009, 09:37:59 AM »

I know it's not rocket science but i'm disabled and I'm unable to do alot of bending and stuff like that.
Thanks for all the great info. It also has to be sprayed with the orange peel crap. I think I found someone that will do it real cheap.... Thanks again for the great info.

marty722

small drywall work needed

flytime

Re: small drywall work needed

marty722

Re: small drywall work needed

beerjet

Re: small drywall work needed

enginedoctor

Re: small drywall work needed

enginedoctor

Re: small drywall work needed

enginedoctor

Re: small drywall work needed

marty722

Re: small drywall work needed

enginedoctor

Re: small drywall work needed

IRRebel

Re: small drywall work needed

marty722

Re: small drywall work needed