1
Interior / Need a upholstery guy
« on: August 03, 2019, 10:31:14 AM »
Looking for a guy to upholster some side panels and engine cover, nothing special just in the light and I already have the foam. Near El Cajon or santee
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
WTB / Need a rear seat for a 1994 ultra
« on: August 05, 2018, 12:05:40 PM »
Rear seat for a 21' ultra...maybe side panels too
3
The No Wake Zone / Back to the dark side (jet boat)
« on: August 05, 2018, 11:25:05 AM »
Well after many years of not having a jet boat. I picked one up yesterday. Project boat. Not something I think I’m going to keep forever but it will make my decision easier to either convert my twin outboard into a jet or find two motors for it. Funny if you know me.
4
Miscellaneous / Spam / A-arm conversion kit
« on: April 11, 2015, 03:58:32 PM »
Kit is new..ever used.
It a weld in kit. Kit allows for 18" of travel and is only 12" wider than stock.
Kit includes,
4- tig welded a-arms, 1.25" chromoly tubing
4- 1" uniballs
3- 5/8" chromoly heirs
8- 1 an 5/8" stainless steel misalignment spacers
16-5/8"-1/2" stainless steel misalignment spacers
2- chromoly, box plated,tig welded combo spindles
2- tie rods
1- tie rod adapter bracket
1- fully welded chromoly front clip, with tig welded bulkhead shock mount with hardware
I paid $3,250.....look to get $2,750 obo
It a weld in kit. Kit allows for 18" of travel and is only 12" wider than stock.
Kit includes,
4- tig welded a-arms, 1.25" chromoly tubing
4- 1" uniballs
3- 5/8" chromoly heirs
8- 1 an 5/8" stainless steel misalignment spacers
16-5/8"-1/2" stainless steel misalignment spacers
2- chromoly, box plated,tig welded combo spindles
2- tie rods
1- tie rod adapter bracket
1- fully welded chromoly front clip, with tig welded bulkhead shock mount with hardware
I paid $3,250.....look to get $2,750 obo
5
Engine Mechanical / Electrical / Fuel gauge ohm
« on: September 11, 2013, 06:26:07 PM »
I got a beede fuel gauage #ce 946525....5-14-7 made... What sender do I need? Two or three wire?
6
WTB / Looking for a mercruiser motor.
« on: May 28, 2012, 08:18:26 PM »
Wanting to buy a 454 or a 350 mercuiser. Also a bravo drive. Tanx
7
Boats For Sale / Tony...little mini
« on: April 29, 2012, 04:41:01 PM »
Craig list pickle fork 13er..http://palmsprings.craigslist.org/boa/2974634950.html
8
Gelcoat / Paint / Fireberglass Repair / Best wood for a boat?
« on: April 22, 2012, 02:02:37 PM »
What's the best plywood for the floor of a boat and why? I know what I think i'm going to use.
9
Project Boats For Sale / 82 eliminator 19'er
« on: March 15, 2012, 09:31:10 PM »
1982 Eliminator Daytona Pickelfork 19-Foot (Tunnel Hull)
Ex Mod VP Boat - originally set up by Performance Plus
First Mod VP boats to break the 100 mph mark
Boat has center hull turning fin and tall stringers for stability
New white paint
Solid boat, no fiberglass damage
Needs to be finished
Seats in very good condition
Blue printed bottom
Previous owner started to restore the boat in 2004
Was in storage since 2004
Heavy duty trailer
Fuel tanks have been cleaned, ready to install
Performance Plus adjustable motor mount
Boat and trailer currently registered
Titles for boat and trailer in hand
Price: $2650. For questions please call: 760-470-2051.
Ex Mod VP Boat - originally set up by Performance Plus
First Mod VP boats to break the 100 mph mark
Boat has center hull turning fin and tall stringers for stability
New white paint
Solid boat, no fiberglass damage
Needs to be finished
Seats in very good condition
Blue printed bottom
Previous owner started to restore the boat in 2004
Was in storage since 2004
Heavy duty trailer
Fuel tanks have been cleaned, ready to install
Performance Plus adjustable motor mount
Boat and trailer currently registered
Titles for boat and trailer in hand
Price: $2650. For questions please call: 760-470-2051.
10
Sand / Who's going to Glamis for New Years?
« on: December 17, 2011, 04:09:28 PM »
Who's going.......I'll be in wash 10 or 15+ lol
11
WTB / Wtb a fuel injection conversion kit.
« on: September 07, 2011, 05:30:18 PM »
Wanting to go of a carb to a fuel injection carb. Anyone have one for sale?
12
WTB / Looking for a chevy ls motor..
« on: August 23, 2011, 08:47:41 PM »
Who's have a chevy ls motor for sale? (ls1,2 or 3 or lq9)(6.0 or 6.2) complete....... 
13
The No Wake Zone / Anyone have a ipad2?
« on: August 14, 2011, 07:35:16 PM »
How do you upload pictures to this site?
14
The No Wake Zone / Thinking of buying this truck.....what do you guys think?
« on: August 14, 2011, 07:25:35 PM »
$9950 obo.....
2000 Ford F250 Extra Cab 4 x 4
This truck is in great condition! It has a 6" lift, 33" tires, fox resi shocks all four corners, paint is shiny, no dents or scratches. Looks Great!
this truck is great for towing it has a v10 tows with no problem,completly detailed once a week interior is perfect no rips 7.5 in touch screen in the
dash and has 12 in rockford fosgate p3 sub and amp door speakers by orion very loud and clean sound 2500 in the stereo alone and it only has
88200 miles runs like new no issues at all
2000 Ford F250 Extra Cab 4 x 4
This truck is in great condition! It has a 6" lift, 33" tires, fox resi shocks all four corners, paint is shiny, no dents or scratches. Looks Great!
this truck is great for towing it has a v10 tows with no problem,completly detailed once a week interior is perfect no rips 7.5 in touch screen in the
dash and has 12 in rockford fosgate p3 sub and amp door speakers by orion very loud and clean sound 2500 in the stereo alone and it only has
88200 miles runs like new no issues at all
15
Projects / Wife's jet boat
« on: June 12, 2011, 11:23:59 AM »
What is it worth? 460 ford with a jacuzzzi....18feet
16
Boats For Sale / Found it on another site.
« on: June 09, 2011, 05:11:02 PM »
1988 Crusader tunnel lake boat-$4500
This was my Dads toy and he does not need it anymore. He left it with me as he has moved on from this earth. He really enjoyed this boat and I'm thankful for the times we had playing and working on it together.
I am into ocean boats now so this one needs a new home.
200 hp 2.4 l motor. Rebuilt power head dropped on 3 years ago. Oil injection removed. Manuel jack plate. Factory set back bracket. No LWP and that's what kept us from getting more speed out of it. We ended up with the current set up which does 70 MPH at 6000-6200 rpm. I believe it's running a 24 p Lazar prop now. Add a LWP+set up time and I bet 75-80 is reachable. Matching Bimini top and custom boat cover. Two axle trailer. It's fairly light-my dad towed it with a 4 banger Toyota.
The boat has normal wear and needs the steering wheel re-wrapped + a bit of spring clean up. There is and always has been a crack where the transom meets the deck in front of the motor mount. It has stayed the same for 5 years. Still something to point out. I can email additional pics.
Located in San Luis Obispo.
$4500 OBO
Mtnboater@hotmail.com
Attached Thumbnails
Last edited by MTN BOATER; 05-31-2011 at 09:47 PM. Reason: add pics
This was my Dads toy and he does not need it anymore. He left it with me as he has moved on from this earth. He really enjoyed this boat and I'm thankful for the times we had playing and working on it together.
I am into ocean boats now so this one needs a new home.
200 hp 2.4 l motor. Rebuilt power head dropped on 3 years ago. Oil injection removed. Manuel jack plate. Factory set back bracket. No LWP and that's what kept us from getting more speed out of it. We ended up with the current set up which does 70 MPH at 6000-6200 rpm. I believe it's running a 24 p Lazar prop now. Add a LWP+set up time and I bet 75-80 is reachable. Matching Bimini top and custom boat cover. Two axle trailer. It's fairly light-my dad towed it with a 4 banger Toyota.
The boat has normal wear and needs the steering wheel re-wrapped + a bit of spring clean up. There is and always has been a crack where the transom meets the deck in front of the motor mount. It has stayed the same for 5 years. Still something to point out. I can email additional pics.
Located in San Luis Obispo.
$4500 OBO
Mtnboater@hotmail.com
Attached Thumbnails
Last edited by MTN BOATER; 05-31-2011 at 09:47 PM. Reason: add pics
18
The No Wake Zone / looking for a fuel sender
« on: October 27, 2010, 09:05:14 AM »
I need a fuel sender for my gas tank(tube one)
19
WarZone / Go Pro camera any good?
« on: October 03, 2010, 01:23:14 PM »
Looking to get a cheap video camera. How are the Go Pro's or is there a better one out there(cheap one)
20
Sand / anyone going to the fibertech show today
« on: October 02, 2010, 08:42:14 AM »
fibertech show....today only i think..
21
Sand / Who's going to the ssss?
« on: September 16, 2010, 08:25:37 AM »
Who's going to the Sand Sport Super shop? It's this weekend. I'm going friday>
22
The No Wake Zone / is it true that eliminator is filing chapter 11
« on: September 09, 2010, 08:07:35 PM »
Thursday, 09 September 2010 17:25
This is, far and away, the saddest piece of industry news I’ve ever had to report. Eliminator Boats, the perennial leader in the West Coast Custom performance-boat market, is filing for Chapter 11 Restructuring. That means, for those who might not understand the shorthand of restructuring, bankruptcy.
“It’s not anything we like doing, but on the other hand the option not to it is fatal,” said Bob Leach, the owner and founder of the Perris Valley, Calif., company, which in its best years produced more than 300 boats. “I would rather pay everybody every dollar we owe, but it’s just not in the cards at the moment.
“Believe me, if I had my choice I would pay everybody,” Leach continued. “But I don’t have it. I have liquidated everything I own personally to maintain us and get to where we are.”
Leach, who added that simply going out of business was “not even on the table at this point,” said his restructuring plan will be reviewed by the court next week. There is a strong chance that the company will return to its former headquarters in nearby Mira Loma.
According to Leach, outside investment in the company remains “a distinct possibility.”
“There’s a lot of interest in our new 27 Speedster, and we’ll be looking at building some other new models as well,” said Leach. “I ‘interview’ everyone who comes through the door, and 80 percent of them are saying their businesses are picking up. So that’s the good news.”
This is, far and away, the saddest piece of industry news I’ve ever had to report. Eliminator Boats, the perennial leader in the West Coast Custom performance-boat market, is filing for Chapter 11 Restructuring. That means, for those who might not understand the shorthand of restructuring, bankruptcy.
“It’s not anything we like doing, but on the other hand the option not to it is fatal,” said Bob Leach, the owner and founder of the Perris Valley, Calif., company, which in its best years produced more than 300 boats. “I would rather pay everybody every dollar we owe, but it’s just not in the cards at the moment.
“Believe me, if I had my choice I would pay everybody,” Leach continued. “But I don’t have it. I have liquidated everything I own personally to maintain us and get to where we are.”
Leach, who added that simply going out of business was “not even on the table at this point,” said his restructuring plan will be reviewed by the court next week. There is a strong chance that the company will return to its former headquarters in nearby Mira Loma.
According to Leach, outside investment in the company remains “a distinct possibility.”
“There’s a lot of interest in our new 27 Speedster, and we’ll be looking at building some other new models as well,” said Leach. “I ‘interview’ everyone who comes through the door, and 80 percent of them are saying their businesses are picking up. So that’s the good news.”
23
The No Wake Zone / Going in for my first MRI..
« on: September 01, 2010, 12:23:07 PM »
oh the fun. my first MRI today... My backs been jacked for 2+ months. I think it all started when I got my jet boat! lol 
Well, just have to wait and see. Might have to sell the boat and the blower motor to pay the bill 
Hope it doesn't get to that. But should sell them any ways. They just sits around getting dirty
Well, just have to wait and see. Might have to sell the boat and the blower motor to pay the bill Hope it doesn't get to that. But should sell them any ways. They just sits around getting dirty
24
The No Wake Zone / anyone going to el cap on sunday
« on: July 17, 2010, 08:20:15 PM »
who's going? or who when today?
25
The No Wake Zone / Wanted to buy it But.
« on: July 17, 2010, 01:34:35 PM »
It was build at the same time mine was.(buddy's ) I was thinking of getting it before you third guy sold it and now his guy is going to sell it now...http://sandiego.craigslist.org/csd/boa/1848069015.html
Still thinking about making mine into a jet. But why go slowwer!!!! oh ..gas $$$$$
Still thinking about making mine into a jet. But why go slowwer!!!! oh ..gas $$$$$