1
Project Boats For Sale / Re: Cole T-deck, MPD pump. Clean!
« on: February 17, 2010, 12:44:10 PM »Yep, This was a great boat, it sold last Sunday.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Yep, This was a great boat, it sold last Sunday.
2
Project Boats For Sale / Re: Cole T-deck, MPD pump. Clean!
« on: December 08, 2009, 11:43:34 AM »
Here it is. Make offer!
3
Project Boats For Sale / Re: Cole T-deck, MPD pump. Clean!
« on: October 05, 2009, 10:17:59 PM »
$4000 Somebody by this for the pump!
4
Project Boats For Sale / Re: Cole T-deck, MPD pump. Clean!
« on: August 15, 2009, 05:52:11 PM »
Yes, I still have it. e-mail sent.
5
Project Boats For Sale / Re: Cole T-deck, MPD pump. Clean!
« on: July 05, 2009, 10:02:20 PM »
Reply to my E-mail so that I can send photos, I have many including the inside of the pump. SS Impeller, loader, shoe, machining, droop, diverter, wedges. Intake has a pressure gauge. Ride plate and cav. plates. Bottom has been done and speed coated. Dick vale paint job is good condition. Floors are very good. Boat was completly rewired last year. I also plumbed in a water pressure releif valve for the engine "in"and the intercooler "in". I am able to run full volume on the motor and maintain pressures under 15 psi. All plumbing is SS. Trailer is nice.
6
Project Boats For Sale / Re: Cole T-deck, MPD pump. Clean!
« on: July 05, 2009, 09:00:14 AM »
It has an upholstery kit.
7
Project Boats For Sale / Cole T-deck, MPD pump. Clean!
« on: July 03, 2009, 06:06:54 PM »
No motor.
Asking $5000. You can't build the pump for that. Dick Vale paint, Nice trailer. Trade offers for V-drives considered.
rvrlam@citlink.net for photos and details.
Thanks
Asking $5000. You can't build the pump for that. Dick Vale paint, Nice trailer. Trade offers for V-drives considered.
rvrlam@citlink.net for photos and details.
Thanks
8
Miscellaneous / Spam / Re: ULTRA-LIGHT AIRCRAFT W/ FLOATS
« on: January 18, 2009, 10:39:10 AM »
Hrer it is with the retractable gear floats.
rvrlam@citlink.net
rvrlam@citlink.net
9
Miscellaneous / Spam / ULTRA-LIGHT AIRCRAFT W/ FLOATS
« on: January 18, 2009, 10:13:43 AM »
Quicksilver MXL, puddle jumper floats, Second Chanz ballistic chute, digital gauges, 50+ HP Rotax. $6000 OBO. What do you have to trade?
10
Project Boats For Sale / Re: 78 COLE JET
« on: September 23, 2008, 09:03:42 PM »
I do have a deal goin' will know soon.
When is the AVI thing?
When is the AVI thing?
11
Project Boats For Sale / Re: 78 COLE JET
« on: September 22, 2008, 09:57:43 PM »
I dig jets but I'm goin' V-drive. The need for more speed and there just plain Bitchen to drive! You know what I mean Terry.
12
Project Boats For Sale / Re: 78 COLE JET
« on: September 22, 2008, 08:31:53 PM »
Thanks for posting the photo Jerry, Nice shot!
13
Project Boats For Sale / 78 COLE JET
« on: September 21, 2008, 02:15:45 PM »
Less motor. MPD pump, bottom done, skegg. great condition. Dick Vale Paint is bad at gas fills. ran 100 MPH $6500 OBO.
More photos avail. upon request. rvrlam@citlink.net
More photos avail. upon request. rvrlam@citlink.net
14
V-Drives / Re: so how many SCJBers have actually driven a V-drive???
« on: August 17, 2008, 09:58:44 AM »
I like the new Hondo so much that I'm looking at a trade deal for the propduster. Will put it's motor in a Cole runner. Need more speed!
15
Jet Pumps / Re: Water swirls coming out of the pump?
« on: August 16, 2008, 08:35:24 PM »
Good info! Thanks
16
Jet Pumps / Water swirls coming out of the pump?
« on: August 16, 2008, 07:21:43 AM »
I had some jet guys are telling me that the water out of the pump is twisting under a fast pass, say they have never seen this before. Any ideas on whats going on? 12JG, droop, MPD worked.
17
Engine Mechanical / Electrical / Re: 427 ???
« on: August 15, 2008, 07:43:29 AM »
Cool, Will pull a cover this weekend.
Yep, 744 on dyno with the new smaller cam. My new 540 on the 944hp pulley is spining the same pump to 6700 rpm.
It's an MPD pump. Im hitting the rev at launch or when hitting it at mid rpm at so I need to have it worked on before installing the 1012 hp pulley.
Runnerbottom, T-deck, not a sprint. seller says it's a 5/8 but l haven't measured it.
Thanks Paul.
Yep, 744 on dyno with the new smaller cam. My new 540 on the 944hp pulley is spining the same pump to 6700 rpm.
It's an MPD pump. Im hitting the rev at launch or when hitting it at mid rpm at so I need to have it worked on before installing the 1012 hp pulley.
Runnerbottom, T-deck, not a sprint. seller says it's a 5/8 but l haven't measured it.
Thanks Paul.
18
Engine Mechanical / Electrical / Re: 427 ???
« on: August 14, 2008, 09:28:37 PM »
Cool! I thought that the 427 was a rare combo. what kind of rpm's were they good to? any markings on the BB heads that identifies them? A really nice runnin' little motor.
I've got a fresh 454 .30 over with a 671 that spun my AA berkley to 6000 rpm. and dyno'ed to 7000 @ 744HP with room to go. I'm thinking that it will run nice in a V-drive.
I've got a fresh 454 .30 over with a 671 that spun my AA berkley to 6000 rpm. and dyno'ed to 7000 @ 744HP with room to go. I'm thinking that it will run nice in a V-drive.
19
Engine Mechanical / Electrical / Re: 427 ???
« on: August 14, 2008, 07:51:13 PM »
Thanks for the good info.
The block is a 454
The balancer is not weighted.
I'll send you an e-mail Terry
The block is a 454
The balancer is not weighted.
I'll send you an e-mail Terry
20
Jet Pumps / Re: Intake repair suggestions?
« on: August 14, 2008, 07:10:13 PM »
So, you sucked a duck? thats some funny $hit!
21
Jet Pumps / Re: Intake repair suggestions?
« on: August 14, 2008, 07:49:24 AM »
Good to know, Thanks Tony. If your out on weekends send me a photo of your boat and I'll stop in.
Hey Brad, I remembrer seeing photos of a dead duck in your boat, Did it actually break something?
Hey Brad, I remembrer seeing photos of a dead duck in your boat, Did it actually break something?
22
Engine Mechanical / Electrical / Re: 427 ???
« on: August 14, 2008, 07:35:59 AM »
Thanks for the site, I'll check it out.
Yea, What I was hoping to find was #'s to determine if this were a factory 427. Then I could find the internal parts and hp info.
Hey HD, what gears, prop, hp, speeds are you runnin' I would really like something to compare to. V-drives are Bitchen! I cruise at 1800 rpm / 25 mph. 4500 rpm / 59 mph. Wide open I dont know yet, I have both hands full and blurry vision! can't see the GPS.
Yea, What I was hoping to find was #'s to determine if this were a factory 427. Then I could find the internal parts and hp info.
Hey HD, what gears, prop, hp, speeds are you runnin' I would really like something to compare to. V-drives are Bitchen! I cruise at 1800 rpm / 25 mph. 4500 rpm / 59 mph. Wide open I dont know yet, I have both hands full and blurry vision! can't see the GPS.
23
Jet Pumps / Re: Intake repair suggestions?
« on: August 13, 2008, 09:43:00 PM »
Thanks for the fin #'s, will pull the pump after this season.
THANKS FOR THE WAVE AND KIND WORDS, SUNDAY WAS DEAD BUT I'M OUT EVERY WEEKEND.
Got a new toy, V-drives are bitchen!
THANKS FOR THE WAVE AND KIND WORDS, SUNDAY WAS DEAD BUT I'M OUT EVERY WEEKEND.
Got a new toy, V-drives are bitchen!
24
Engine Mechanical / Electrical / 427 ???
« on: August 13, 2008, 09:19:19 PM »
Just picked up this Hondo for my Dad. Pretty fast and alot of fun! Supposed to be a 427 but there are no #'s on the block in front of the head. Are there any other visual indicators?
Thanks
Thanks
25
V-Drives / Re: Center stear T deck???
« on: August 02, 2008, 12:12:06 AM »
Here it is, Kurtis Kraft, a guy on performance boats says they made 5 or 6 of them. Posted a cool pic of a blown boat named Bullet. Same hull.