101
Engine Mechanical / Electrical / Re: PTO or No PTO
« on: July 30, 2011, 07:10:32 AM »
Ray, the one you sent us worked. I think I have this thing about nailed down. Thanks.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
103
Engine Mechanical / Electrical / Re: PTO or No PTO
« on: July 28, 2011, 10:27:27 PM »
Did a double check tonight and the holes line up, including the relief. I will consider the PTO for the disconnect though. Thanks Ray.
104
Engine Mechanical / Electrical / PTO or No PTO
« on: July 28, 2011, 06:37:33 PM »
So I was told recently that even if the pattern of the driveline matches that of my crank, I still need to run a PTO. Is this right? I thought they were used as an adapter when the patterns did not match.
105
The No Wake Zone / Re: Landlord from HELL
« on: July 22, 2011, 07:13:17 PM »
People helping people. Now thats what this world is all about! 
God I love this place. 
God I love this place.
106
The No Wake Zone / Re: The Moo Boat's first new adventure
« on: July 19, 2011, 05:33:58 PM »
Ray - you may want to google Chameleon Paint! Its worth a shot.
107
WTB / Re: Bebo's Parts List
« on: June 29, 2011, 07:55:26 PM »
TTT
Somebody has got to have this stuff lying around.
Somebody has got to have this stuff lying around.
108
WTB / Re: Bebo's Parts List
« on: June 25, 2011, 06:45:52 PM »
Bump for the driveline cover and BBC Ski Tow
109
The No Wake Zone / Re: what names did you choose
« on: June 24, 2011, 11:02:32 PM »
Bebo's float has been dubbed "Bits & Pieces" cuz thats how it got built. Bits and pieces from a lot of people especially from here.
110
Engine Mechanical / Electrical / Re: Mounting Plate Bolt Holes
« on: June 22, 2011, 10:35:51 PM »
Doh! 
That would explain a lot. I will give it a shot tomorrow.
That would explain a lot. I will give it a shot tomorrow.
111
Engine Mechanical / Electrical / Re: Mounting Plate Bolt Holes
« on: June 22, 2011, 10:09:23 PM »
Yeah its all 4. The block is cast right? Can you drill/helicoil it; if so will it hold up to the task?
112
Engine Mechanical / Electrical / Mounting Plate Bolt Holes
« on: June 22, 2011, 09:03:40 PM »
When I put the bolts throught the front mounting plate into the block they seem a little loose. The threads look a little flat inside the hole. The bolts are 3/8" which I think is right. I ran a chaser through, but it didn't do anything cuz there is no material to reshape. Have not tried the rear plate because it is still on the engine stand. What can I do?
113
The No Wake Zone / Re: Cherry Picker
« on: June 22, 2011, 08:57:37 PM »
Thanks for the offers guys. Omar had one and is was right on my way home from work!
114
The No Wake Zone / Cherry Picker
« on: June 19, 2011, 01:59:16 PM »
Anybody in the So Cal area got a cherry picker I could borrow for a little while? We are gonna try to get Bebo's motor in and set the angle, but its gonna be an after work - whenever we can fit it in kinda deal. Might need it for a week or two. I would glady kick down a few bucks or beers or both. Just don't want to have to rent one repeatedly or long term. Thanks in advance.
116
The No Wake Zone / Re: Happy Bday Skiperydoo!!!!
« on: June 12, 2011, 03:22:15 PM »
Skip - Hope its a great year for ya! 
117
WTB / Re: Bebo's Parts List
« on: June 12, 2011, 06:44:37 AM »
Parts Update.
We have almost everything for the motor, should be dropping it in soon.
We still need a driveline cover. Would prefer an aluminum one. BBC to Panther.
Thanks
We have almost everything for the motor, should be dropping it in soon.
We still need a driveline cover. Would prefer an aluminum one. BBC to Panther.
Thanks
118
Engine Mechanical / Electrical / Re: Stuck Fuel Pump Rod
« on: May 02, 2011, 11:37:41 PM »
We decided to go with an electric fuel pump because the mechanical gets in the way of the engine plate. I think we will pull the plugs, turn the engine sideways and try turning the engine over and see if the eccentric helps us out as our first option.
Thanks for the input.
Thanks for the input.
119
Engine Mechanical / Electrical / Stuck Fuel Pump Rod
« on: April 29, 2011, 05:53:54 PM »
So we decided to go with an electric fuel pump on Bebos Crusader, but the fuel pump rod won't come out. We put a little grease on it to hold it in when we installed it. Any suggestions? BBC BTW.
120
The No Wake Zone / Re: You never know!
« on: April 15, 2011, 03:47:43 PM »
So sorry to hear Josh. My family and I will keep you and your grandparents in our prayers.
121
The No Wake Zone / Re: Happy Birthday Challenger!
« on: April 12, 2011, 08:23:29 PM »
Happy Birthday Ken.
Bebo says Happy B-Day too.
Bebo says Happy B-Day too.
122
The No Wake Zone / Re: happy b-day crewcheif
« on: April 09, 2011, 04:14:26 PM »
Happy B-Day CC. Hope its a good one.
123
WTB / WTB PALLET RACK
« on: March 27, 2011, 10:43:37 AM »
Anybody got a hook up for used pallet racks in the So Cal area. Looking for something around 2' - 3' deep x 8' wide x 8' tall.
Lemme know.
Lemme know.
124
The No Wake Zone / Re: happy b-day chromey
« on: March 21, 2011, 04:22:14 PM »
Happy Birthday Chromey. Hope its a great on for ya.
125
The No Wake Zone / Re: pop's
« on: March 17, 2011, 03:35:36 PM »
Great news! We will keep in our prayers tonight.