1201
Boat Showcase / Re: '73 Southwind
« on: April 06, 2013, 07:57:13 PM »
,
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1206
Engine Mechanical / Electrical / Re: BBC Intake Manifold Question
« on: April 04, 2013, 11:07:55 PM »
Pretty sure I have a performer rpm manifold on my bbc resting in my garage
1208
Projects / Re: 71 kona project
« on: April 04, 2013, 04:19:17 PM »
Second patch almost done. Laid out 8 layers of glass last night, got some bubbles in the last layer so gouged em out, now getting ready to sand and apply a filler coat of resin with the 404 hd filler and then it's paint
1209
Projects / Re: bbc 454
« on: April 04, 2013, 10:38:57 AM »
I have a 402 bbc if your interested pm for details
1210
Engine Mechanical / Electrical / Re: Bilge pump
« on: April 02, 2013, 07:39:15 PM »
I have a 500 Gph rule pump on a float switch tucked up as close to my bellhousing as possible where water normally sits when the boats not moving and 2 500 Gph rules on a manual switch/float switch On either side of the pump intake just incase the lake decides to jump over the back of the boat and I need to stab it to keep her floating. I'm with Glenn, on the triples.
1211
Engine Mechanical / Electrical / Re: 460 rpm limited
« on: April 02, 2013, 12:32:55 PM »
May be a fuel delivery issue, what fuel pump you running
1212
Boats For Sale / Re: 1973 Kona Jetboat
« on: April 02, 2013, 11:33:56 AM »
Nice little kona. Good luck, should go pretty quick.
1214
The No Wake Zone / Re: Awesome Easter in Willow Valley
« on: April 01, 2013, 09:44:23 PM »
Hey mr Halley Dave what are you located in I happen to know a few licensed plumbers. One happens to be my bosses brother. Sullivan plumbing out of riverside ca. And if the house was flooded because of said pipe it should be covered.
1215
Boats For Sale / Re: Craigslist & ebay boats
« on: March 31, 2013, 04:59:50 PM »
I spoke with that guy, claims the hull is damn near perfect and the jet is good. Owned it for 10+ years, bought new boat and pulled the motor from it for the new one.
1217
Random Boat Parts For Sale / Re: For Free
« on: March 29, 2013, 06:40:15 PM »
Well let me know Hondo, I'll kick in some gas money to help with the trip down
1218
Random Boat Parts For Sale / Re: For Free
« on: March 29, 2013, 06:25:29 PM »
I'd like to get the trailer but getting it to so. Cal seems to be a problem
1219
The No Wake Zone / Re: So ive been diggin a pond
« on: March 29, 2013, 10:48:17 AM »
Well good luck with that. Got popped on a site using a hydrant without a meter 5k fine and they sent someone out to " estimate how much water" I used and billed us for it, throw down a liner put a couple feet of dirt on top of it and call it good
1220
The No Wake Zone / Re: So ive been diggin a pond
« on: March 29, 2013, 08:39:41 AM »
Your on the Internet dude. Use google
1221
Suggestions / Support / Re: Pool lighting
« on: March 29, 2013, 07:22:31 AM »
Oh and try not to touch the new bulb to much and wipe it down with a dry clean rag. Seen the bulbs do wired things when you turn them on and they have oils on them. And don't turn the light on for to long with it out of the water.
1222
Suggestions / Support / Re: Pool lighting
« on: March 28, 2013, 10:09:46 PM »
The light bulb is in a sealed fixture that is secured with one screw usually and a hook on the other end. And what ever you do don't cut the extra cord when you pull it out. Suppose to roll it around the fixture as you put it back in, they leave it long so you can change it without draining the pool. Unscrew and get it out of the water. Remove cover and break seal. Wright down what fixture you have so you can get the wright seal and most pools use a 500 watt bulb so there's that. Reverse procedure and your golden.
1223
Suggestions / Support / Re: Newbie section
« on: March 28, 2013, 10:04:16 PM »
Because fools be scared.
1224
The No Wake Zone / Re: So ive been diggin a pond
« on: March 28, 2013, 06:23:57 PM »
And how the hell you gonna fill it