Why? If it is not going to be seen it is a waste of money. Cf is very expensive and for how much you will be removing between layers. I do not see the benefit at all

I'm going to cap it myself, the inside is already done. I was working on the motor and took a look under the inside of the hull and seen that the two were joined together with glass matting and that made my mind up....

That glass bonding strip is how almost all hulls are bonded together. It is called tabbing. Don't be afraid to grind or cut into the hull to get a good working area. The joy of glass is you can just add more. If you have any questions feel free to post them up.

RC

Looks like a Rayson Craft. Glasscutter, the funky thing hanging off the nozzle is the chute for the reverse thrust. Because it is a flatly the pump is higher up in the transom, so they have to drop the bucket down to get reverse to work.

When is the next swap meet...    

It is normally the second Sunday of the month.

Did it(block) have to be pinned at all. Sorry for sounding so picky, but these are the questions you are going to be asked by the ones looking for a flatty.

How was the block? 8ba's are known to have thin cylinder walls and crack at the deck were the water jackets are closest. I know a few guys that deal in trad rods and are big into flatheads. I will put the word out for you.

Also.... Is it still standard bore? How was the crank (std. or under) if under how much? Does it come with water pumps?carb?

oops yeh i meant next month.  do you happen to know any of his contact info?

no I didn't get it.

$51

I see your $51 and raise you a bag of skittles.


Sent from that vibrating thing In your pocket using Tapatalk

Yes it is part of the cable itself, you will need to replace the cable.


Sent from that vibrating thing In your pocket using Tapatalk

Just got this one in the mail today! Try    natchez.com  $62 with shipping!

(Attachment Link)

A complete blank? Holy shit you are gonna have some fun with that one. Do you know what foundry it came from?


Sent from that vibrating thing In your pocket using Tapatalk

Thanks for pointing that out...i had no idea easter fell on march 31st.

Does anyone object to moving this date 1 weekend earlier March 22-24? I cant push it into april as the first weekend of April is the Parker Circle Boat races.

Sounds good to me. I am going to try to make this one. Never been to Parker before


Sent from that vibrating thing In your pocket using Tapatalk

Awesome, thanks for all of the replies everyone! I am just going to be shooting the part of the drive on the outside of the boat.  The part inside the boat doesnt look bad, so I am just goingto clean it all up.  How many cans should this take?  I was thinking 2 would provide several coats. I will also go with a blue paint pen for the lettering.  I want to do the lettering blue just because it matches the boat's color.

When I repainted mine it used just over one can, that's the suction housing and all


Sent from that vibrating thing In your pocket using Tapatalk

That would be sweet. But then I'd have to change my motor mounts lol  merry Christmas everyone.


Sent from that vibrating thing In your pocket using Tapatalk