Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - stc315

Pages: 1 ... 5 6 [7] 8 9 ... 48
151
Engines / Engine Parts For Sale / Re: Stripped carb!
« on: May 28, 2013, 12:23:17 PM »
I have a 850 dp  main body. Bare. $20 shipped

Sent from my DROID BIONIC using SoCalJetBoats mobile app


152
Random Boat Parts For Sale / Re: Wtb boat cover
« on: May 23, 2013, 08:13:07 AM »
I got this one. Has been perfect cover for my 20ft Baker. It even covers the pump. I was super impressed considering the price.

http://www.amazon.com/dp/B0089MX15M/ref=pe_175190_21431760_3p_M3C_ST1_dp_1

153
Engine Mechanical / Electrical / Re: Distributor advice / BBF 460
« on: May 20, 2013, 10:40:08 PM »
I'm planning to go to Ford Duraspark. Re-curved for my motor. MSD uses Duraspark internals. Paul Kane recommended.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


154
Engines / Engine Parts For Sale / Re: Iron CJ 429/460 Intake
« on: May 20, 2013, 10:40:35 AM »
Sold.

155
Lower River / Re: mamorial weekend
« on: May 20, 2013, 10:04:31 AM »
We'll be out there at Martinez, 3rd sandbar on Saturday Memorial weekend. I have to work Sunday and Monday  >:(

156
The No Wake Zone / Re: River bound
« on: May 18, 2013, 08:11:20 PM »
Made it to sand bar and 2 speed runs till it died. Hoping to go back next weekend. Tunnel rides a lot smoother than V hull especially crossing wakes.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


157
The No Wake Zone / Re: River bound
« on: May 18, 2013, 05:58:22 PM »
Very true!

Sent from my DROID BIONIC using SoCalJetBoats mobile app


158
The No Wake Zone / Re: River bound
« on: May 18, 2013, 05:27:40 PM »
Boat ran great. Got it up to 65mph on GPS. Then it just died. Lost ignition. Had to get towed in. Got home and found loose wire on the coil. Tightened it down and engine fired up. Feel dumb but glad it was easy fix.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


159
The No Wake Zone / River bound
« on: May 18, 2013, 11:57:05 AM »
Headed to Fisher's. Excited to test all the mods I did over winter.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


160
Projects / Re: Chub Tub Update
« on: May 16, 2013, 09:31:21 PM »
All back together. Just got to lube a few things and fill her up! Should get her wet by Saturday!!!








161
Projects / Re: Chub Tub Update
« on: May 15, 2013, 10:12:26 AM »
Motor and gauges are in. Still need to re-install dash switches, steering, and fuel fills. Then I can install interior. I also need to figure out why my starboard side fuel pick up is not working. Hopefully it's just clogged and not broken. I'm taking a break today to go pick up my son in SD (home from deployment!) for the weekend. I'll post pics when it's all done.

162
The No Wake Zone / Re: Happy bday jim Brock
« on: May 15, 2013, 10:05:11 AM »
Happy Birthday!!!

163
Projects / Re: Wiring Suppliers Question
« on: May 09, 2013, 12:58:01 PM »
Quote from: Xthaspot on May 09, 2013, 08:37:27 AM
I actually made my own wire harness for  my engine and I'm in the process of re-wiring the rest of the boat. I found it to be cheaper and if you h e the patients I think it comes out better.
that looks great! I definitely want to do my own harness.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


164
Projects / Re: Wiring Suppliers Question
« on: May 09, 2013, 10:41:39 AM »
Quote from: TJS Nordic on May 09, 2013, 08:16:18 AM
Mcmaster will have everything you need. You can get pre-tinned as well. Good stuff, good prices, fast shipping.
TJ, do they have automotive/ marine wire? What did you use?

Sent from my DROID BIONIC using SoCalJetBoats mobile app


165
Projects / Wiring Suppliers Question
« on: May 09, 2013, 07:45:34 AM »
I'm planning to re-wire my boat next winter, where should I go to get the wire? I know Hardin still makes harnesses, but I want to build a custom harness.
Thanks,
Sam

166
Engines / Engine Parts For Sale / Re: Iron CJ 429/460 Intake
« on: May 09, 2013, 07:40:50 AM »
Offers??? Willing to ship, but shipping will be pricey. 60lbs in a 15"x7"x30" box


Here is how it ranked vs. other intakes on 460 Ford site.

Dual Plane…..

Blue Thunder Dual Quad/not for sure/not for sure----------Uses two 4 barrel carburetors. Works best with Blue Thunder Heads. Can be used with standard production 429/460 heads. Port match recommended.
Weiand 8021/Idle-6800/$219.95----------Can be used with standard production 429/460 heads. Cobra Jet sized port openings works best with CJ heads. Larger intake runners.
Edelbrock Performer RPM Air Gap/1500-6500/$342.95----------Can be used with standard production 429/460 heads. Best to keep intake charge cool. Larger intake runners.
Edelbrock Performer RPM/1500-6500/$239.95----------Can be used with standard production 429/460 heads. Larger intake runners.
Weiand 8012/Idle-6800/$185.95----------Can be used with standard production 429/460 heads. Recommend gasket match.
Police Interceptor and SCJ iron intake/Idle-6500/$150----------Can be used with standard production 429/460 heads. Larger intake runners. Cobra Jet sized port opennings.
Edelbrock Performer/Idle-5500/$229.95----------Can be used with standard production 429/460 heads. Recommend gasket match.
Stocker 429 and 460 iron intake/Idle-5500/$50----------Can be used with standard production 429/460 heads. Recommend gasket match.


167
Projects / Re: Chub Tub Update
« on: May 09, 2013, 07:33:39 AM »
So my buddy finally gets a day off to go pick up my stuff (and his) at the polisher and nothing has been polished. He told us a couple of weeks ago that everything was done. On top of that several parts for my buddy's 55 Chevy Pickup are missing!!! Needless to say, if it would have been in USA, I would have been bailing my bro out of jail. Unfortunately, he was able to calm himself enough to get out of there without knocking the polisher out simply because he didn't want to go to Mexican jail. So I put the fugly intake on my motor and I will slap the droop (factory powder white) on and call it close enough for government work. I will pick up my new PD nozzle from powder coat tomorrow, sand and buff clear and then all I will be waiting for is the fuel fills I bought from Recycle Performance. Got a smoking deal on NOS fuel fills ($29 each), they only had red and gold available at that price so I went with red. I figure I'll powder coat them to match later. Besides red is usually color for gasoline lol.

168
Engines / Engine Parts For Sale / Iron CJ 429/460 Intake
« on: May 01, 2013, 11:25:06 AM »
Iron Cobra Jet intake for Ford 429 or 460. Has the usual corrosion, machined surfaces are in good shape. This is a great intake, it rates higher than several aluminum intakes in performance. I'm replacing it with a polished aluminum intake otherwise I would probably have run this till I built my stroker motor. $70 or trade for ?
Pick up at lower river. Delivery to San Diego , Los Angeles, or Phoenix areas for fuel cost negotiable.
Call or text me at 760-234-6776
Sam

169
Engines / Engine Parts For Sale / Re: I NEED A C8VE head please help
« on: April 12, 2013, 11:17:23 AM »
Try 460Ford.com all kinds of BBF stuff there.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


170
The No Wake Zone / Re: Happy Birthday Crewchief
« on: April 09, 2013, 03:38:06 PM »
Happy Birthday Bro!!!

Sent from my DROID BIONIC using SoCalJetBoats mobile app


171
Random Boat Parts For Sale / Re: Old School fiberglass Scoop w/tray
« on: April 05, 2013, 02:26:56 PM »
SOLD.

172
Random Boat Parts For Sale / Re: Old School fiberglass Scoop w/tray
« on: April 04, 2013, 07:51:15 PM »
Lol. If it was 3 or 4 inches difference,  I could make it work,  but 2 feet is too much.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


173
Random Boat Parts For Sale / Re: Old School fiberglass Scoop w/tray
« on: April 04, 2013, 05:35:27 PM »
Dang. Mine is 64" won't work.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


174
Random Boat Parts For Sale / Re: Old School fiberglass Scoop w/tray
« on: April 04, 2013, 04:44:49 PM »
Blue would work. How wide is it?

Sent from my DROID BIONIC using SoCalJetBoats mobile app


175
Random Boat Parts For Sale / Re: Old School fiberglass Scoop w/tray
« on: April 04, 2013, 03:31:35 PM »
Unfortunately,  I can't use them on my boat. My transom is curved sharply on the corners.

Sent from my DROID BIONIC using SoCalJetBoats mobile app


Pages: 1 ... 5 6 [7] 8 9 ... 48

Null

SMFPacks CMS 1.0.3 © 2026