Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - propless

Pages: 1 ... 60 61 [62] 63 64 ... 80
1526
Projects / Re: Eliminator Sprint
« on: April 27, 2008, 08:11:23 PM »
 Update !!   The glue is all off the floor.  ;D ;D  I hate carpet glue/contact cement  !!!  This was a horrible job (removeing it), the glue was at least 1/4 in thick in places and buried under what I think was a layer of ruberized undercoating :screwy:.  There is still some left on the sides but that wont take long to get off  ::).

  Its dusty but its makeing progress , I think .

I'm still undecided about what to do with the floors  :-\ .  Some parts look ok and other parts look cloudy (thick layers of glass  ??? )  and the whole thing shows shiney strands of glass when you get it wet in the sun .   :( 

1527
Projects / Re: 16' Tahiti project
« on: April 27, 2008, 01:09:30 PM »
 You guys are all wrong , thats where the nitrous bottles go   >:D.

1528
The No Wake Zone / Re: Get to work thread !!
« on: April 27, 2008, 01:04:39 PM »
Quote from: 2savage4you on April 27, 2008, 10:00:53 AM
Been doing research and eating waffles ;D

Going out to work on it in just a few mins ;) 

2sav
2sav, its 1:00 now.  Are you still eating waffles  :screwy:  Get to work !! that boat aint going to finish itself youngster .

Quote from: pw_Tony on April 27, 2008, 12:44:39 PM
Work? What work? I'm hitting the water today  ;D
Gee thanks ,  just what I needed to hear  >:(

Quote from: hotrod56cars on April 27, 2008, 10:20:16 AM
I... uhhhh... uhmmm... well you see... duhhhh...   :P

It's 10:20 AM and it's 88 degree's outside, it's only going to get hotter... that excuse isn't going to work, is it?

How about... my head hurts?  --->  :banghead:  ;D

  No !!!  Those are not good excuses.  Next you going to say the dog ate my tools  ::)

1529
The No Wake Zone / Re: Get to work thread !!
« on: April 27, 2008, 10:17:28 AM »
Quote from: jet boat performance on April 27, 2008, 10:10:26 AM
No Time !! too busy workin on everyone elses  ;D
Yea   :sly: , but there is always time to play on the computer  ::) .  Jk, Tom .
 btw, is your Super Sprint Tahiti done yet ?  ;D   Get to work !!!

1530
The No Wake Zone / Re: Get to work thread !!
« on: April 27, 2008, 10:01:22 AM »
 I'm on my way out there too  ::), Yea, thats my story and I'm sticking to it !!

1531
The No Wake Zone / Get to work thread !!
« on: April 27, 2008, 09:54:59 AM »
 I'm sitting here (eating donuts  ::)) and I looked to see who was on the site , to my suprise it was ...

propless  = should be working on boat
speedymopars = should be working on boat
hotrod56cars = should be working on boat
GAWnCA = should be working on boat
JMS-1 = ?
Oldsquirt = ?
HDriderTH = ?
cj222 = needs a BBF ?
beerjet = needs a beer ?
2savage4you  = should be working on boat !!!!!!
turbo350r = ?
Ralph Brunt = should be working on boat

 Hmmmm ,  I know at least 6 of us should be outside working on our boats (not sure if beerjet is planning on useing any of his this year)

 SUMMER IS COMING ,  GET TO WORK !!!!!

1532
Interior / Re: floor removal
« on: April 27, 2008, 09:29:56 AM »
Quote from: GAWnCA on April 27, 2008, 08:57:20 AM
Propless...  Looking back at your thread, I see you have about as much room to work as I do.   :screwy:
LOL , Yea and now there are three boats here  :banghead: One in the garage and two on the side of the house (Oh yea, plus the one I stored at my moms house  ::)).  Help I'm a boataholic !!!

 Back to the floor,  FORKEDUP are you going to try to replace the entire floor or just the bad part ?   I only ask because it looks like it would be hard to do the whole thing because of the suport legs for the dash.  :-\

1533
Interior / Re: floor removal
« on: April 27, 2008, 08:51:29 AM »
Quote from: 2savage4you on April 27, 2008, 06:06:28 AM
Take a skill saw right up the center , cut it and then you just have to peel back the wood on both sides. Get you a grinder and clean it all up......

Really not a big deal , but being the first it is always the scariest :o Dont wanna fug nothin up ;)

And wear a mask , there is nasty shit in there!!!!!
2sav
Thats how I did mine too , just set the blade depth the same as the thickness of the floor so you dont cut into the cross braces or into the hull.  ;)  I cut across the floor so it came up in small pieces  ;D
http://www.socaljetboats.com/index.php?topic=1284.msg20609#msg20609

1534
Projects / Re: Mach 1
« on: April 26, 2008, 08:42:37 PM »
 Sounds like a good plan  ;) .   
 btw , I was going to pick on you about that diverter switch  ::) , but than I remembered what I did with for a trim comtrol switch on mine  :banghead: ,  must be a "stereo guy" thing.   :sly:  Yea, its a powerwindow switch  :-[

1535
Miscellaneous / Spam / Re: CraigsList Spam
« on: April 26, 2008, 07:22:25 PM »
Sanger jet hydro   http://fresno.craigslist.org/boa/657562209.html

Sanger Bubble deck   http://fresno.craigslist.org/boa/656922762.html

1536
Projects / Re: Mach 1
« on: April 26, 2008, 07:13:04 PM »
Quote from: hotrod56cars on April 26, 2008, 06:30:34 PM
That has to be better than having one knee in your chin and the other waaaayyy over there. I don't know, maybe not. I still can't bend my knee far enough to sit in the thing more than a couple of seconds. I have no idea what I'm going to do when the boat is water ready and I can't sit in it.  :banghead:  Maybe drive the thing with my left leg laying on the bow.  :screwy:
Been there done that, when i broke my ankle skiing (rested the cast on the deck and went back next the weekend ) .   ;D ;D 

 Looking at your pics it looks like your boat has false floors from the tunnels to the outside , or I'm seeing it wrong  ??? .   If it does maybe you could remove them to make more leg room  :-\ .

1537
Projects / Re: Mach 1
« on: April 26, 2008, 06:15:31 PM »
Quote from: hotrod56cars on April 26, 2008, 01:22:39 PM

You don't sit "in" this boat, you sit "on" this boat, and although the picture probably doesn't show my point, it does show where the driver's right foot sits, where the driver's left foot sits, and more importantly the uncomfortable difference between the two. I have no idea what to do about it because I never go anywhere and see how other tunnels are rigged.
  Rod , heres a pic of mine , its not much better (to high).  There has to be a better way  ??? .

1538
Projects / Re: Mach 1
« on: April 25, 2008, 08:28:02 AM »
Quote from: hotrod56cars on April 24, 2008, 10:53:07 PM
::)  Is it just me or is this place a ghost town?

Shootin' for Parker.

Looks good Rod , and yea it does seam kinda slow around here. :sly:   Hope you make it to Parker , looks like I'm going to run out of time  :( .  GO team sanford !!!  ;D

Quote from: hotrod56cars on April 24, 2008, 11:17:36 PM
I can't wait until next year when I chop about 9 inches off of the pod.  >:D
  Why  ??? ??? , dosnt the pod do the same thing as a set back pump?  And you want to move it forward ?  ??? ???

1539
Jet Pumps / Re: this place is dead. lets see the back of your boat
« on: April 22, 2008, 10:50:39 PM »
Quote from: cyclone on April 22, 2008, 09:23:29 PM
thanks josh and thank you for the intake cover. i put it on the trailer today and it works great!

 Intake cover  ???  Whats this secret part all about ?   If it keeps debris out of the pump while towing , I need some info about one !!

1540
WarZone / Re: classified ads
« on: April 22, 2008, 10:36:28 PM »
 Cool , thats going to be a nice family boat !!!   But my phychic abilitys see an energizer kit or some fiberglass work in your future , that looks like a Jacuzzi YJ  :( .

1541
Projects / Re: BAHNER
« on: April 20, 2008, 09:12:53 AM »
 I just got up in the attic / secret storage, and looked at the sand rail seats I have.  hhmmm, the foam is on the covers.  Maybe thay do it that way on the sand toys so you can remove the covers and wash out all the dirt / sand without getting the foam wet  :-\

1542
Projects / Re: BAHNER
« on: April 19, 2008, 08:12:22 PM »
DAAAMMN 2sav, that looks great for only 2 beers  ;) !!    And dont worry about the seats, thats the way thay were on mine when I took them apart to change some of the wood.  ;D

1543
WarZone / Re: hot boat is back up
« on: April 19, 2008, 09:16:13 AM »
 It works for me  ???  I wasnt banned  ::).  And my messages are all still there  ;D (some good info in them about converting my Daytona to a V-drive  >:D).

Quote from: Brad @ SoCalJetBoats.com on April 19, 2008, 07:41:11 AM
who gives a fock.  ::)
I do !!  All the old threads/posts are still there, for now.  And as I have said in the past, if you sort through all the bs there is some great info/ideas on there.  Just stay out of the drama sections ::)

1544
The No Wake Zone / Re: What do you do for a living??
« on: April 17, 2008, 07:22:44 PM »
 I do car audio and security (installer), and buisness is dead  :(.  People cant afford gas so thay arent spending money on stereos  ::).


1545
The No Wake Zone / Re: What do you do for a living??
« on: April 17, 2008, 07:09:00 PM »
Quote from: Marlin on April 17, 2008, 06:42:48 PM
Beer truck driver ;D

Now thats job security !!!   ;D

1546
Interior / Re: white interior
« on: April 17, 2008, 07:02:14 PM »
Quote from: COORS HEAVY on April 17, 2008, 02:32:23 PM
I USED AN ALL PURPOSE CLEANER AND A OLD WORN OUT GREEN SCOTCH BRITE AND IT WORKED WONDERS.
Quote from: FORKEDUP on April 17, 2008, 02:38:54 PM
same here, came out nicely
Me too , It works great.  And if all ealce fails there is always white vinyl dye  ;)

1547
Engine Mechanical / Electrical / Re: Truck problems ?
« on: April 17, 2008, 06:50:34 PM »
Quote from: Ralph Brunt on April 17, 2008, 05:18:18 PM
this is your problem :o
;D Yea Yea , I know .  I would sell it but at 10 mpg nowbody wants to buy it  :banghead:.  I bet your motorhome gets better mpg than my truck  >:(

1548
Projects / Re: BAHNER
« on: April 17, 2008, 05:00:37 PM »
 Looks great 2sav !!!  I like the idea for storage, I have one of those sitting in my parts pile too  ;D

 re the scoop , I have one of those things on mine and your right, they are a little ugly  :-\ .

1549
Engine Mechanical / Electrical / Re: Truck problems ?
« on: April 17, 2008, 04:50:44 PM »
 Thanks , but I got it going  ::) .  You can all call me a dumb ass, it was the coil.  It showad spark but it wasnt enough to jump the gap from the rotor to the cap.  I put in a new coil and it fired right up :-[ .  Drove it around the block and it runs good again.  I guess I was VERRY lucky I made it home from L.A. a few weeks ago.

btw, Its a good thing I have more than one vehicle, last night the smog pump on the mustang locked-up in the driveway on my way home . So, the truck and the car were both broken  :banghead:. I had to drag out the motorcycle to gather parts today  ;D .  Now everything works again, and I needed a day of tinkering in the garage anyway (therapy) . And it gave me a reason to play sick from work today  ;D .

 Now back to the boats  >:D

1550
Engine Mechanical / Electrical / Truck problems ?
« on: April 17, 2008, 02:01:36 PM »
   HELP
My truck Is acting up again , wont start  :mad: :mad:.  Its an 89 Chevy 3500 / 454 .  I have fuel flow at the injectors.  No spark at the plugs, It has spark on the coil wire so I changed the cap and rotor, still nothing on the plug wires  ??? , WTF !!!  .  I did have to change the dist about a year ago because it broke the trigger thing for the computer .  Could it be the dist again ?  I was thinking maybe its fireing the coil when the rotor is not lined up with anything.  Everything looks ok in the dist (no broken parts this time) ???  And Yes the dist is turning  ::). Or maybe the computer  ??? .  Im lost on this one now  :-[

Pages: 1 ... 60 61 [62] 63 64 ... 80

Null

SMFPacks CMS 1.0.3 © 2026