201
Hulls / Re: Southwind tunnel
« on: August 11, 2009, 06:23:34 PM »
i bought a swtd new paint/gauges/interior/with pump 3000=seems high for what you are looking at
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
202
Random Boat Parts For Sale / Re: Stuff For Sale
« on: August 08, 2009, 04:10:34 PM »
hi greg =doug out in rio linda=hows 20 bucks sound
203
Boat Showcase / Re: Lets See Your Rides
« on: July 29, 2009, 04:06:17 PM »
81 dragster=new pump installed again
204
V-Drives / Re: Steering onto trailer
« on: July 20, 2009, 05:28:11 PM »
ditto on the steering fork straight up
205
The No Wake Zone / Re: What do you do
« on: July 14, 2009, 02:21:12 PM »
stationary engineer for wonder bread
206
Gelcoat / Paint / Fireberglass Repair / Re: Any Suggestions on How to Do This?
« on: July 13, 2009, 02:34:51 PM »
ss piano hinge and make an access door maybe
207
Engine Mechanical / Electrical / Re: engine lays over at 5k rpms
« on: July 11, 2009, 08:41:51 PM »
my demon run damn fine=850 on a bbf
208
Engine Mechanical / Electrical / Re: engine lays over at 5k rpms
« on: July 08, 2009, 04:11:12 PM »
motor pics
209
Engine Mechanical / Electrical / Re: Help.. Where to mount Aeromotive 1000 EFI Fuel pump...
« on: July 08, 2009, 04:04:32 PM »
on the back of your seats=check with rtriebess build on his youngblood-same unit==easy access=up out of the water
210
The No Wake Zone / Re: addiction???
« on: July 03, 2009, 03:00:44 PM »
yes er re=
2 - 78 southwind 18 fters
1 - 81 southwind tunnel dragster
1 - 76 elim daytona
1 - 75 elim bubble deck
1 - 75 cobra jet that gave to my bro
OH THE MADNESS
2 - 78 southwind 18 fters
1 - 81 southwind tunnel dragster
1 - 76 elim daytona
1 - 75 elim bubble deck
1 - 75 cobra jet that gave to my bro
OH THE MADNESS
211
The No Wake Zone / Re: paging mr jim brock
« on: June 30, 2009, 09:06:22 PM »
i have never seen one up close so was not sure what they looked like or was written on them=i will probably still do one as it will make things alot easier to access =water lines grease fitting etc-thanks for the input=do you have any input in regards to the cav plates=thanks doug
212
The No Wake Zone / Re: paging mr jim brock
« on: June 30, 2009, 03:28:50 PM »
what would your recommendation be as too how far back your cav plates should be=mine are set back almost to the end of the pod=when i get on it it jumps out of the hole find and then gets planted in the water=its a great ride and stable in the water=i guess its a preference thing=does this look to far back
213
The No Wake Zone / Re: paging mr jim brock
« on: June 30, 2009, 07:23:54 AM »
that is slick tom=diffently a hot rod look for a hot rod boat= dont know if you read my reply from other post on my dragster build=but thanks again for turnaround on the drive shaft=excellant job
214
The No Wake Zone / Re: paging mr jim brock
« on: June 29, 2009, 08:48:52 PM »
it looks like from underneath that it was glassed over and used to have one
215
The No Wake Zone / paging mr jim brock
« on: June 29, 2009, 12:16:22 PM »
i here you are the one to talk to about tunnel dragsters=im am looking for the inspection cover on the back of the pods=do the oem ones have writing on them or a design or just plain aluminium plate=i would like to find an original one if you have one or know who does==thanks doug
216
WTB / swtd pod access cover
« on: June 28, 2009, 09:21:40 PM »
does anybody know if they made access covers that were custom made with lettering and such or were they just an aluminium plate
and if they were custom made OEM does anybody have one laying around
and if they were custom made OEM does anybody have one laying around
217
Projects / Re: new eliminator projects
« on: June 24, 2009, 08:08:08 PM »
i was just informed by my son that the daytona is not to be sold=he wants to put it together and run it==yahoo
218
Projects / Re: new eliminator projects
« on: June 23, 2009, 03:53:58 PM »
the bubble deck will be for sale after i remove the pump and other goodies=will be replacing the pump with another and redoing interior and general cleanup and such
the daytona is up in the air-will probably decide after hull repairs
the daytona is up in the air-will probably decide after hull repairs
219
Projects / new eliminator projects
« on: June 23, 2009, 02:01:28 PM »
picked up these two boats today
75 daytona=rock damage to hull
76 bubbledeck= needs cleaning=pump has been worked and has a bronze impellar=will be putting this pump in my southwind dragster
75 daytona=rock damage to hull
76 bubbledeck= needs cleaning=pump has been worked and has a bronze impellar=will be putting this pump in my southwind dragster
220
Projects / Re: southwind dragster build/maiden voyage fathers day
« on: June 22, 2009, 11:32:42 AM »
good morning tom=thanks for the great effort in getting my drive shaft in such a short time=got it at 5:00pm tue and was ready to go wed nite=you all are
a great bunch over there=look forward to meeting you in person one of these days==thanks again, Doug
a great bunch over there=look forward to meeting you in person one of these days==thanks again, Doug
221
Projects / Re: southwind dragster build/maiden voyage fathers day
« on: June 21, 2009, 09:09:14 PM »
dont know if its a daytona=will be picking it up monday=
camp far west was a riot until saturday night=about 9pm someone in a pickle fork took off after another boat and got his wake and the flipped sideways and thru the driver out and the boat supposely landed on him and they could only find his life vest=then we heard that they found him at 5=30 am the next morn=so it put a real damper on sunday=the 1/4 mile cove was closed sunday
they had sheriffs and divers out=
just a shout out too all to be safe
the southwind tunnel ran well=still a work in progress
hope all had a good fathers day
camp far west was a riot until saturday night=about 9pm someone in a pickle fork took off after another boat and got his wake and the flipped sideways and thru the driver out and the boat supposely landed on him and they could only find his life vest=then we heard that they found him at 5=30 am the next morn=so it put a real damper on sunday=the 1/4 mile cove was closed sunday
they had sheriffs and divers out=
just a shout out too all to be safe
the southwind tunnel ran well=still a work in progress
hope all had a good fathers day
222
Projects / Re: southwind dragster build/maiden voyage fathers day
« on: June 17, 2009, 10:42:20 PM »
im just about photo out
had to reset the intake and move it back another inch because you could not get the clean out off=who ever cut the pod did not cut it right=intake was set crooked=it has been alot of fun and frustration=but what are boats for=
just picked up two more boats=75 eliminator bubble deck and 76 eliminator picklefork which has alot of hull damage from rock crawling=no motors= but the price was right
had to reset the intake and move it back another inch because you could not get the clean out off=who ever cut the pod did not cut it right=intake was set crooked=it has been alot of fun and frustration=but what are boats for=
just picked up two more boats=75 eliminator bubble deck and 76 eliminator picklefork which has alot of hull damage from rock crawling=no motors= but the price was right
223
Projects / Re: southwind dragster build/maiden voyage fathers day
« on: June 17, 2009, 10:33:15 PM »
more photos
224
Projects / Re: southwind dragster build/maiden voyage fathers day
« on: June 17, 2009, 10:30:58 PM »
more photos
225
Projects / Re: southwind dragster build/maiden voyage fathers day
« on: June 17, 2009, 10:29:05 PM »
more photos