26
The No Wake Zone / Re: ops ,i did it again
« on: December 21, 2014, 07:13:00 PM »
Go to a 21. Not only more room to fit the extra family but they come with a LOT more baggage too. Also full hatch to keep the kiddos safe.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
27
Projects / Re: 21' Warlock project...
« on: December 21, 2014, 02:01:02 AM »
late night seat deconstruction. gonna make a new seat frame. this one is wrecked. i think there mustve been fat girls up in the bow because they band-aid fixed it with 4 HUGE stainless bolts and a steel bar.
its interesting to see how much detail goes into making the boat, they used biaxial cloth throughout the entire boat. hull, floor, tabbing, etc. but then in the seat frames its like they covered it in home depot paint... everything is rotten and theres hokey things like that little 1' piece where they couldve just cut the panel longer on the seat sides... weird.
its interesting to see how much detail goes into making the boat, they used biaxial cloth throughout the entire boat. hull, floor, tabbing, etc. but then in the seat frames its like they covered it in home depot paint... everything is rotten and theres hokey things like that little 1' piece where they couldve just cut the panel longer on the seat sides... weird.
29
Projects / Re: 21' Warlock project...
« on: December 20, 2014, 05:45:10 PM »
not much progress, sold the bahner and played musical trailers with the boats. the good news is that the warlock fits on my trailer *PERFECTLY* no need to move bunks around. im so glad that i DIDNT move the bunks on my trailer with the bahner and procrastinated...
only thing im worried about is the weight of the motor and drive in the boat and the weight distribution on the trailer. right now without rigging its got a LOT of tongue weight.
only thing im worried about is the weight of the motor and drive in the boat and the weight distribution on the trailer. right now without rigging its got a LOT of tongue weight.
30
Project Boats For Sale / Re: 1980 Bahner 21' daycruiser...
« on: December 17, 2014, 09:01:32 PM »
sold.
31
Project Boats For Sale / Re: 1980 Bahner 21' daycruiser...
« on: December 14, 2014, 11:00:40 PM »
$200 obo.
32
The No Wake Zone / Re: Looking to purchase
« on: December 12, 2014, 11:58:12 AM »Thank you, I thought they were but was unable to find anything actually saying that.
Crap, so I may be leaving the jet boat world...
Sent from my iPhone using SoCalJetBoats
grass is green on this side too. do it.
33
The No Wake Zone / Re: Boat/Trailer weight
« on: December 10, 2014, 11:07:15 AM »
just rent a truck from home depot or uhaul to tow it. $29 a day or something like that. dont risk your life and possibly endanger other lives by towing something thats almost double the weight of your MAXIMUM capacity of your current vehicle.
34
The No Wake Zone / Re: Boat/Trailer weight
« on: December 10, 2014, 10:59:44 AM »21 foot tahiti, bbf 460, tandem roadrunner trailer....came in around 3600(or 3800)
geezus, 3600? was the bilge filled with water or something?
35
Projects / Re: 21' Warlock project...
« on: December 09, 2014, 09:31:20 PM »
more cleaning and grinding... starting to be white again. i just want it clean so i can cover it all in bilgekote.
36
Project Boats For Sale / Re: 1980 Bahner 21' daycruiser...
« on: December 09, 2014, 09:04:27 PM »
$300... toss me an offer. too long and it'll be going to the dump.
37
Project Boats For Sale / Re: Alright guys, lets hear some opinions
« on: December 09, 2014, 09:03:40 PM »
he'd have to pay me $1700 to take another panther jet. run. run far away. 
38
Jet Pumps / Re: is this a 1310 spicer
« on: December 08, 2014, 11:06:23 AM »That looks different than mine. I just rebuilt it this past weekend.
Sent from my iPhone using SoCal Jet Boats
yours is a standard 1310 driveline that requires a PTO.
39
Jet Pumps / Re: Transom adapter pointers
« on: December 08, 2014, 12:26:30 AM »
if it were me, id patch the bilge plug hole in the TA and use the existing one in the boat. its much lower and will keep the bilge dry. i dunno how much luck you'll have draining a boat out of a hole thats 4" higher than the lowest point of the bilge...
40
The No Wake Zone / Re: Looking to purchase
« on: December 06, 2014, 03:57:01 PM »
if yer gonna get a 21, jump into the bravo. i have the alpha one gen 2 and im always worried about breaking it if i jump on it too hard... 
41
Project Boats For Sale / Re: 1980 Bahner 21' daycruiser...
« on: December 05, 2014, 11:04:52 PM »
this weekend only. $350 come and get it.
42
Projects / Re: 21' Warlock project...
« on: December 05, 2014, 10:29:42 PM »
seats fit...
just some stainless hardware removed from it...
just some stainless hardware removed from it...
43
Engines / Engine Parts For Sale / Re: off shore parts.
« on: December 04, 2014, 11:55:04 AM »
you mean procomp isnt the best quality? it says "best" on the box!
44
Projects / Re: 21' Warlock project...
« on: December 02, 2014, 04:39:13 PM »
so here's where im at... some fiberglass damage is found on the side of the boat. at a quick glance it looks like at least 2 layers of cloth were burned... you can see the brown in behind them which is solid fiberglass. im gonna cut out the bad stuff and grind/sand a little and see just how far the damage goes. then it comes down to laying up some new glass to build that section back up. its interesting in that the areas where the carpet was, were NOT burned. it mustve acted like an insulator. theres also a layer of tape that goes across the cap joint on the inside that is all frayed and burned. so its just grinding, sanding, and getting back to good glass and seeing how much i need to build back up.
you can see the brown good layer in behind the burned... this is the tape going across the cap.
a layer of cloth burned, again... brown in behind it... hopefully its still in good shape.
you can see the brown good layer in behind the burned... this is the tape going across the cap.
a layer of cloth burned, again... brown in behind it... hopefully its still in good shape.
45
Miscellaneous / Spam / Re: Hobart welder
« on: December 02, 2014, 01:49:18 PM »
Want another 21 bahner hull?
46
Random Boat Parts For Sale / Re: FREE buckets and rear bench seat FREE
« on: November 30, 2014, 11:43:15 PM »Interested_. Still available??
Yup. Have a couple people pm'ing me their info from the other boat site and 3 emails from craigslist. Feel free to swing by to take a peek at them. Pm me a number and I can text you the address.
47
Random Boat Parts For Sale / FREE buckets and rear bench seat FREE
« on: November 30, 2014, 04:25:44 PM »
came out of my warlock, obvious fire damage but good frames and even better templates for new seats. come get em for free.
48
Boats For Sale / Re: Craigslist & ebay boats
« on: November 29, 2014, 07:51:24 PM »No resell value boat handle poor
Sent from my iPhone using SoCal Jet Boats
i dunno about all that... the trailer is worth a little, the motor, and then the interior if its not roached or rotten. $1k for a running boat isnt a bad deal. sure the hull isnt the most desirable in the world but if all checks out $1k isnt bad for a starter boat to get someone out on the river.
49
Projects / Re: 21' Warlock project...
« on: November 29, 2014, 05:49:51 PM »
tonights progress... getting things torn out and cleaning up. getting general idea of where im at and what needs to be done.
floor looks to be in good shape. no dead spots but unlike the floor i put in the bahner it doesnt appear to be attached to the stringers so it feels "soft" when you walk on it. its also not a 3/4" floor either so its not as solid.
floor looks to be in good shape. no dead spots but unlike the floor i put in the bahner it doesnt appear to be attached to the stringers so it feels "soft" when you walk on it. its also not a 3/4" floor either so its not as solid.
50
Projects / Re: 21' Warlock project...
« on: November 29, 2014, 01:56:52 PM »shit man, barely had enough time to blink from reading your for sale post....and you have a new hull in driveway. sleep is for p**ss!es!
the bahner is still for sale... come get it.